December 2025 Tool Box Challenge
-

Our generous, wise, and dare I say handsome host has spoken. Post a photo of your toolbox/toolbag with anything it normally has in it.

-
@LoopCutter said:
Being spoiled, good food!Happy to hear that!
@AzteCypher said:
Here's a glamour shot of my flashlights in rotation, that I never post a picture of even though I use them so much.Do I see a theme there?
An occasional in-use photo would be neat.@fullbreakfast said:
I think that damn squirrel is after my knife. Christmas spirit only goes so far you little varmint!
@IMR4198 said:
I wanted to give everyone a nice infrared photo of a raccoon having its early Christmas dinner of tuna, but I couldn't find any batteries on sale locally. Fortunately I will be able to supply an artist's impression of the same.
@WECSOG said:
The radio is a Kenwood TK-280, VHF. It was originally a fire department radio, but I reprogrammed it to operate on the 2M ham band.I have a CCrane CCRadio 2E, which is capable of picking up the 2-meter ham band. I've never had good luck with receiving transmissions on that band (my guess is that's due to all the brick structures), but I did once pick up some guy yammering on about SD cards. I'll take a guess that you have better luck.
@ReamerPunch said:
For the last mini challenge, post a photo of a toolbox/toolbag.Mini-challenge accepted! The photo I originally planned for day 30 will be posted on the 29th instead.
Day 25
The Milwaukee Fastback got put to work today. I wanted to preserve the card back, so the plastic bubble was cut away.
[attach id=0 msg=2557206]
These Micro Machines served out 30 years in their plastic and card-stock prison. Now they are free to occasionally tear around the desktop and dining room table, though they'll spend most of their time in the desk hutch. The car on the left was held in the package by a rather obnoxious clip (the other two were easier to finally free).
[attach id=1 msg=2557206]
.jpg)
.jpg)
-
@Farmer X said:
I have a CCrane CCRadio 2E, which is capable of picking up the 2-meter ham band. I've never had good luck with receiving transmissions on that band (my guess is that's due to all the brick structures), but I did once pick up some guy yammering on about SD cards. I'll take a guess that you have better luck.Yeah I've had a lot of fun with 2M over the years. The handheld radios don't work great in my house because I live in the boonies and not very close to any repeaters, but I have a bigger radio and an outside antenna and can get into several repeaters with that. And, I can reach a few repeaters with the handheld if I'm out and about.
I like that Milwaukee utility knife. I keep meaning to post up my utility knives, but haven't gotten around to it yet.
-
Day 25
Merry Christmas all!
Couldn’t resist sharing my Christmas gifts from my 8 y.o. twins:
-
Mini-precision screwdriver set w/ key chain pouch
-
Functional “Bravest Dad Ever” LED flashlight
They know me pretty well… :D

-
-
Good stuff. Dad is proud and rightfully so. Best wishes. G

-
That screwdriver set is pretty cool!

-
day 20

-
Day 21

-
Day 22
Here's a weird one I just got for free. A sizing tool for a jeweler to measuring customers ring fingers. It was in a drawer of a small table that I picked up from a store that was being demolished. I have absolutely no clue if I will be able to use it for anything, but i think it's cool.


-
Day 26 Mini Challenge

Green Engineer PZ-58 pliers. For how unique the tool is, it is surprisingly useful. In addition to regular things like gripping and cutting, it can also grab things inline, like a Leatherman knurled screw. I like that feature a lot, and have used it many times for stubborn screws, tiny imperial Allen screws for which I had no driver, mangled screws on used tools, even broken screws, where the head had broken off.
Red Knipex 0821145 pliers. Just an awesome rather small pair of pliers. Comfortable, solid, good gripping.
Homemade: That thing is a Yamaha drum key square driver, which I modified into a 1/4" bit driver with added magnet and retention collar with ball bearing. It has not proven all that useful however, as it is quite heavy for edc, and a t-handle, so awkward to carry on keys or stuff in a pouch, and not that ideal for multiple screws. But it works, looks nice and I am happy with how it turned out.

-
Day 26
Mini-challenge day. This one didn't get much advertising. We will see who has been reading the posts and who has been sleeping in class. Red and green items. The thing I found most useful was the mini flashlight. Especially so, after I thought a giant toad had crept out from under the floor and eaten my everyday black flashlight. That may or may not have actually happened. Not much proof either way. The least useful tool was probably the cute mini pliers. I haven't used them a time this month. Not much plying. I carried or used the other stuff a little. I cleaned up the cat's paw and other red items. Rusty and neglected. I actually carried the Camillus stock knife a day. I got it from my old uncle with no handles on it. I made the red ones from a worthless flashlight he also gave me. He never cleaned up a knife after using it or wasted a single drop of oil on anything. Sharpened his knives by scrubbing them on a concrete step, I suppose. Consequently, all his stuff was ruined long before its time. I read once that in the 1940s Remington made a statement that a pocketknife had a useful life of around 6 months. There must have been a lot more people then like my old Uncle Rob. I did use the green pen some also. Best wishes. Gary:ahhh
[attach id=0 msg=2557250]
-
A couple of great mini-challenge entries so far. Looking forward to more!
-
Day 26
Mini challenge - Green and Red

Green Pelikan fountain pen (which has green ink inside it) and a red Uniball gel pen.
-
@IMR4198 said:
I read once that in the 1940s Remington made a statement that a pocketknife had a useful life of around 6 months. There must have been a lot more people then like my old Uncle Rob.I’m not sure such a short lifespan is necessarily indicative of gross abuse.
It seems likely to me that frequent heavy use, which today might fall on replaceable blade utility knives (or specialized tools such as wire strippers), largely fell on pocket knives in the 1940s.
With carbon steel blades, they would have taken a keen edge but required regular sharpening.
I believe it was LC who shared a story of fixed blade knives being worn out in less than a year on his grandparents’ farm?
-
Day 26
Mini Challenge
Option 1 and Option 2Surprisingly useful: I usually don't use a utility knife very much, although I do keep a few of them handy. I use a regular knife, either fixed or folding, for most cutting chores. However, I found myself using this red utility knife more than usual this month. Partially because I had more packages to open, and partially because I was thinking more about which tool to use for a given task.
The green battery is one of my salvaged 18650 lithium-ion cells from scrapped power tool batteries, that I use to power flashlights and other stuff. I've been leaning heavily on flashlights this month, both as a theme and because it gets dark early in December. As a result, my salvaged cells have been getting quite a bit of use.
Not very useful: I only used the red mini-screwdriver once, as far as I can remember. I thought it would be a really useful tool. But I ended up using a bit clamped in my Visegrips or my homemade keyring driver (neither pictured because they're not red or green) and pretty much forgot about this one.
I got this green pouch from the GAW box when I had it. I thought it would be really useful because it not only carries a tool, but awlso has individual pockets for driver bits. However I didn't use it at all this month because it is slightly too short for the tool I wanted to carry in it.

-
@King_Gorilla said:
A sizing tool for a jeweler to measuring customers ring fingers.That's something I didn't expect to see!

@ReamerPunch said:
Green Engineer PZ-58 pliers.I think I might have to scare up a set. They seem incredibly handy!
@IMR4198 said:
I actually carried the Camillus stock knife a day.Nice job on the new handle covers!

What is the item at left?
Looks like it might be a mini-screwdriver.Day 26
Red and green mini-challenge
Since my carry and use hasn't changed, I'll do the red and green with Opinel No. 4s. I awlso managed to set the Rubik's Cube so it was only showing red and green.
[attach id=0 msg=2557282]

-
@ReamerPunch said:
Day 26 Mini Challenge
Green Engineer PZ-58 pliers. For how unique the tool is, it is surprisingly useful. In addition to regular things like gripping and cutting, it can also grab things inline, like a Leatherman knurled screw. I like that feature a lot, and have used it many times for stubborn screws, tiny imperial Allen screws for which I had no driver, mangled screws on used tools, even broken screws, where the head had broken off.
Ah, the Neji-Saurus! Mine will be seen on day 29 if things go according to plan. Very handy thing to have, particularly if you have to take something apart that has a bunch of cammed out screws.
-
Day 26 + Mini Challenge (s)
[attach id=0 msg=2557302]
Red Multi ended screw driver part of the pouch kit.
The GREEN pipe wrench part of the tool bag.
And a GREEN Wouban pocket light, part of the pouch kit.
And then a Green CQC-5 g10 knife.This picture does include two items I expected to use more frequently. The Lineman scissors and the mini WorkPro pliers.
And my most used a CASE ‘75 STOCKMAN. I have two favorites a Mediterranean Blue SS and a AMBER bone CS

-
Day 26
Mini-Challenge
Corona Razortooth Folding Saw - I expected I would get more use out of this than I have, not necessarily during the challenge, but in general.
Knipex Cobra and Plier Wrenches - I get fair amount of use out of these, especially the Plier Wrenches, which have pretty much replaced all other wrenches except pipe wrenches for me.
Case Seahorse Whitter - It’s a brilliant design for whittling, but not ideal as a general utility pocket knife, so I don’t carry it much.
Wurrkos TD04 - Decent flashlight for the price, and one of my around the house lights
Case Barlow - Should carry it more
SOG DIverge XR - I don’t love it, but it was a freebie
Cold Steel Slock Master - I got it for an inexpensive camp knife, and it is solid in that role. Curious if the rubberized handle will age well or poorly.
CRKT Minimalist Katana - I liked the idea of this one, but haven’t really carried it.
Benchmade Anonimus - A quality blade, but hasn’t made it into any kind of regular carry.
Case 47 pattern Stockman - This one has red G10 slabs. 47 pattern may be the best all around stockman Case makes. Slabs on this one have oddly square corners though.
Bic lighter - Used frequently, most recently for candles for Christmas dinner last night. I buy the five-packs so can’t be too picky about the color, but happened to have a red one in pocket.
Remington Bullet Knife - Solid quality, but not carried much due to being bulky & heavy
Victorinox Companion X Alox - Carried and used a lot during this challenge, but probably won’t see much carry otherwise, as models that have a few more tools are more practical for me.
LionSteel Shuffler - This is one of my desk knives, and gets used pretty regularly. F&F and W&T are excellent. Not carried much, though, because the texturing of the green G10 handle is a bit too aggressive, and the shoulder where the swedge begins tends to get hung up when making through cuts.
Case Marilla - I’ve tended to carry my black one with 20CV blade over this red one with S35VN, but I’ve posted my thoughts on the Marilla earlier in this thread.

-
Day 23:
Misplaced my good Hakko flush cutters, so I got stuck using the Kleins. The Kleins aren't as sharp and don't feel great in the hand, yet are more than 3 times as expensive. I don't get it.
[attach id=0 msg=2557318]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login