December 2025 Tool Box Challenge
-
Casio watches rule.
-
Day 28
The pruning blade assisted opening a bottle of port.

-
Day 27
Switched out my black Case Marilla in 20CV for my red one in S35VN. The red is prettier than the black, but I admit a fondness for 20CV over S35VN.

-
Day 28

Finally, tool needed to used!
The laundry/wash room, on main floor, door knob required tightening.
A Husky 6n1 from the tool bag did the honors. The bag was just two strides down the hall😉
[attach id=0 msg=2557466]
The Case ‘75 Amber Bone (LRG STOCKMAN) was riding in the pocket all day. 🤩

-
Loving all the CASE 6375 action. One of my favorite stock knives. Everyone remember that we have a final going out on a high note mini-challenge tomorrow. Friend ReamerPunch has laid out the ground rules. The task itself is very simple, but should be entertaining for everyone to view. Be there, or be square.
Best wishes, Gary

-
@LoopCutter said:
COVID has been confirmed at the house.Here's hoping that unwelcome visitor soon finds its way out!
@Humayd A R Mahomedy said:
I've been carrying this pin since it's been needed to change cell phone sim cards,and I needed to install a sim on my wife's phone/I have a few of those things that were included with various phones. My present phone seems to have an e-SIM and no SD card slot. At least the extractor tools take up next to no space.
@nate j said:
If someone were looking for a Case knife for general pocket carry and use, I’d probably recommend looking at the Stockman.That's a good example of how my tastes have changed in quite a short time. These days, I prefer knives single blades, or maybe two. Three blades in one knife is a little much for me anymore...though there are exceptions to that rule.
You're set and ready to go for another 20 years!

I'll have to look that one up. And I agree that the F-91W is a little on the small side.
Day 28
On the negative side, I am under a wind warning tomorrow. And it's already started. I'll be praying that the power stays on. On the positive side, the talk of F-91Ws made me recall that clever fans of that watch have developed backlight spreaders. If such things can be had for G-Shocks, I'll like the GD-400-1 a lot better. Of course, I needed next to no carry time to love the Opinel.
[attach id=0 msg=2557478]

-
@IMR4198 said:
I like the looks of that one. I looked at the bands for my old CASIO, but they cost half as much as a new watch. I canned that idea. The metal makeshift band I cobbled together for my old watch actually works. For now, anyway.
I have an Opi in my pocket for today, actually. I have a nice No. 9 that I will dig out once the challenge is over. I like that one a lot. I have been considering doing the Soldier On challenge at the end of January. If I do, I will just do 30 days and get that badge. The only qualifying knife I have is a Victorinox civilian model 108mm GAK. I don't like the idea of posting photos for 90 days straight and boring everyone (including myself) to death. Carrying the 108 would be a piece of cake. Nothing new there. I carried it for decades. I already received one challenge badge with it.
Best wishes. Gary

I'll probably do the Soldier On challenge too. I'll have to decide after 30 days if I'll do the full 90. I have an 08 marked '61 Soldier that would be the obvious and probably best choice, but I have a brand new $50 Amazon gift card and the '08 Soldier is in stock for $50. I think it might be a sign.
-
@fullbreakfast said:
Casio watches rule.
-
-
Day 29 Monday Mini Challenge
I like these Harbor Freight tool bags. They're cheap but rugged. I have several of them in various locations, including my truck. Most if not awl of them are stuffed to the gills, and I risk getting cut, scratched or stabbed anytime I dig around in one looking for something. Which is awlways awl the way on the very bottom of the bag. Of course.


-
Day 29
Final mini-challenge. I have a lot of stuff scattered around. Tools on a work bench. Some in a cabinet. Vehicles. I had to narrow it down to make a photo that made sense. This is my plier box. I do have more pliers and some that are too big for the box. The cat's paw red thing doesn't belong in there. I put it back in the closest box after I used it for a photo. The tubing cutter isn't a plier tool either, but it has squatter's rights in that box.Best wishes. Gary

[attach id=0 msg=2557502]
-
I WONDER?
I wonder what the memorable members of the Toolbox challenge will be quick to put away once the term is finished? A better question might be what will be the first thing they reach for that has been neglected for a month? HmmmmBest wishes, Gary
-
Yes, the better question is what to Reach for, what to pocket carry…
For me, any and awl of my LM PLIER TOOLS.
i do believe I use them awl. In fact I had to make it extremely difficult for myself to even hold one. It may take me several days to locate and return them to the strategic locations they located around my home, and different bags I utilize for my hikes and adventures around the neighborhood or the world.Second will be my SPORTSMAN SAK. It is my secondary pocket knife along with the slip joint flavor of the day.
Scale tools and nail file are so handy for me. I also have a SPARTAN within reach and one in a CROSSBODY BAG that has been fitted with enhanced scales PAIRED WITH A SPIRIT MXBS. A COMPACT is assigned to each to other bags, often paired either a SIGNAL or a BOND.YES, if not for my toting a traditional with me daily I would have had a short challenge experience.
Two more days😎, today and tomorrow!PS: thank you for hosting SIR GARY, excellent job, most excellent!

-
Hopefully, everyone didn't experience too much trauma, learned a few things, and maybe had a couple of chuckles. Best wishes. G

-
Day 29 + the LAST MINI CHALLENGE
I several tool grips, tool boxes, wrench kits, and specialty kits that are stored in the garage or my pickup truck bed. And, I really need to reorganize, as some of the purposes of the kits are no longer practical as the equipment I used the kits for servicing has been long gone from production. (I have been a Field Service Engineer in the Electronic and Computer World since 1973)
One of my most comprehensive kits I assembled in the late 70s for travel, repair of equipment, is this brief style-
[attach id=0 msg=2557511]
[attach id=1 msg=2557511]I could carry like this or fit in the 5”briefcase as a travel on for flights. I basically could repair any delicate item in a computer room. Only item that is currently absent is my Fluke MultiMeter. It is on loan to my son.
Then as the world evolved, I adapted my skills to construction, applying services for Car parks, parking garages to capture and control the revenue these spaces could generate. Gates, ticket dispensers, automatic ticket/payment credit card readers. And supporting technology. This was my bag, that was normally grabbed from the truck for service inspections or repairs.
It is missing some ratchets and sockets. As it has been assigned more domestic tasks today. Stored in the hall closet.
[attach id=2 msg=2557511]I had planned to picture my other convenient tool chests, but that requires relocating my SUV from the garage. Not happening with the 40mph winds and temps at 16° F and dropping. I am staying inside🤪



-
Day 29
Mini-challenge
I'm going to show the contents of my small tool bag, which is the one I most use. There is also a big heavy one that lives in a cupboard and rarely moves, that has the "big guns" in it. That is raided for specific tools as necessary. The small bag has compact tools in it, and it covers everything I need for 80% of jobs, apart from my electric drill and maybe a bigger spirit level.
It's a roll with five sections:

Contents of each section:







-
Looking at the pictures, I realised there are a couple of things missing that are supposed to be in there. So I found them and popped them in. Bonus!
-
That is a very nice tool tool/kit. And you have it stocked very nicely, fullbreakfast!

-
Day 28
Cold Steel SRK (San Mai version)
A decent knife for the price, IMO

-
@Farmer X said:
That's a good example of how my tastes have changed in quite a short time. These days, I prefer knives single blades, or maybe two. Three blades in one knife is a little much for me anymore...though there are exceptions to that rule.Case Moose is good, maybe even better than the Large Stockman IMO, but not currently in production.
Of course, if you don’t find the size and weight objectionable, the large Folding Hunter (one- or two-blade version) will handle anything that might reasonably asked of a folding knife.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

