Combo Edge 30 Day Challenge: 2-1-26 to 3-2-26
-
Day 17
PST II in the pocket today.
Preparing to head out for a travel presentation for VIKING CRUISES.
Getting a head start, reviewing possible destinations after freeing a calendar from the cellophane wrapper.
[attach id=0 msg=2564059]
I may have mentioned before, but the combo blade on the PST II is most practical as the SE shares 50% of the blade space with the PE. On a shorter blade this makes the Combo edge most practical in my eyes.

-
@AzteCypher said:
We had a high of 78°F over here. Tell you what, we'll split the difference. I'll send you 31° of warmer weather and you send me 31° of cooler weather. Deal?!
<u>Day 8</u>
Using my Wenger Highlander this week. Made short work of cutting open my son's allergy meds.
The more you show your HIGHLANDER in this thread, the more I am intrigued to search for one.
But, then there can ONLY be ONE!
-
@AzteCypher said:
I found them at an Asian market not too far from us.
@LoopCutter said:
Preparing to head out for a travel presentation for VIKING CRUISES.I've been on two cruises...Western Pacific deployments. Enjoy yours!
Day 17
Combo edge combo.
[attach id=0 msg=2564115]

-
@Farmer X said:
So here's a photo of the USCK with a pin from my new employer. If you don't live in the Midwestern United States, you probably won't recognize the logo.This one?
@LoopCutter said:
The more you show your HIGHLANDER in this thread, the more I am intrigued to search for one.But, then there can ONLY be ONE!
I loved the movie and the show!
-
<u>Day 17</u>
The Buck Whittaker was pretty busy today. We had mail call.
Wife wanted me to use better manners than a Neanderthal so I had to cut open a package of napkins.
And we had package duty.
The contents of said package may or may not have a combo edge and may or may not make an appearance before this challenge is over.
-
@AzteCypher said:
This one?I loved the movie and the show!
I very much enjoyed the MOVIES, and the show, great music as well.
-
Day 18
Not much on the agenda today, prepared but still nothing to report.
I did select a reliable COMBO BLADE, part of a MT to be prepared.
[attach id=0 msg=2564211]
Will report as the day winds into the evening.

-
Mini Challenge Announcement.
On Day 20 -
** The Right Tool for the Job **
It's been said that plain edges are best at cutting natural materials like food, wood and jute cord. Serrated edges excel at synthetic materials like plastic, nylon, and paracord.
In a twist from the first mini challenge, cut two things - one synthetic or man-made material, and one natural material. Cut each however you find it most natural for you. Post one picture and comment on any pros or cons of how your combo edge handled each task
The inspiration for this challenge is the time that I had some heavy duty, thick plastic liner that I was fitting into a crate. In taking haphazard swipes at the plastic to get it down to a manageable size, with one hand I noted pretty clearly that if I caught the plastic with the plain edge it would slide away from me. If I caught it with the serrated edge, it would catch, cut, and follow through with the plain edge. After doing that I sat down and snacked on an apple which I cut with the same Leatherman Skeletool. As I munched away, I thought was one place where I thought the combo edge really did the trick.
-
-
Day 19
Combo blade on a COPPERHEAD, will have pocket duty today. Preparing venture out to 3 stores for stables, treats and essentials if not distracted!
[attach id=0 msg=2564335]
Just completed an inspection of the PULSE. 👍

-
@AzteCypher said:
This one?Yes indeed!
Day 18 (catching up)
Nothing more than another combo edge combo for today.
[attach id=0 msg=2564352]
Day 19
The Freestyle would be an ideal supplement to most any SAK, as it provides additional utility with minimal redundancy.
[attach id=1 msg=2564352]

-
-
Day 20 + Mini Challenge
The mini was a real challenge to me, so to properly handle I selected two combo knives for this day and then changed up my plans, taking a hit for the team😉
Last night, a trip to a food store searching for my favorite breakfast bread, I found the deli was running a promo for a Bristo meal, a protein plus two sides for $5. Broiled steak strips and broccoli slaw, and a broccoli/apple salad.
My meal for either lunch or dinner depending how long my doctor’s visit runs.🥺My Vic OHT was knife number 1, I like the SE and its position on the forward part of the blade.
The other, my OPINEL No8 Outdoor. The Combo blade is more traditional and with the PE at the forward position allows for the best comparison on what ever I would cut if against a hard surface or cutting as a rip saw motion.
The first comparison, cutting man made material. The container, plastic containing the food, seperate lid from the base so the lid can be nested underneath.
Both knives had no issue, using the tip or the heal, no matter the SE or the PE. 👍👍👍👍, max score.
[attach id=1 msg=2564467]
Then, cutting natural material. STEAK, tender juicy steak!
[attach id=0 msg=2564467]
Both blades cut meat with no issues just as I suspected.
👍 OHT. 👍 Opinel.I can only admit, this was a tough challenge and I suffered through as tough as it was. Whew


-
Mini Challenge Announcement.
On Day 25-
** The Original Multitool**
For many of us a combo edge was our first introduction to pocket tools. And some of us weren’t the sharpest tools in the shed

I don’t mind admitting that I used my folding knife for some things that it wasn’t meant for- scraping, tightening screws, prying lids… locking bathroom stalls that have broken bolts

Post a picture of your combo edged tool being used in a non-standard way. Be safe, and don’t do anything that could cause injury

For a bonus mini challenge: post the favorite picture you have taken this month on the Combo Edge Cooperative thread, linked below
/topic/85419

-
@LoopCutter said:
Day 20 + Mini ChallengeThe mini was a real challenge to me, so to properly handle I selected two combo knives for this day and then changed up my plans, taking a hit for the team😉
Last night, a trip to a food store searching for my favorite breakfast bread, I found the deli was running a promo for a Bristo meal, a protein plus two sides for $5. Broiled steak strips and broccoli slaw, and a broccoli/apple salad.
My meal for either lunch or dinner depending how long my doctor’s visit runs.🥺My Vic OHT was knife number 1, I like the SE and its position on the forward part of the blade.
The other, my OPINEL No8 Outdoor. The Combo blade is more traditional and with the PE at the forward position allows for the best comparison on what ever I would cut if against a hard surface or cutting as a rip saw motion.
The first comparison, cutting man made material. The container, plastic containing the food, seperate lid from the base so the lid can be nested underneath.
Both knives had no issue, using the tip or the heal, no matter the SE or the PE. 👍👍👍👍, max score.
[attach id=1 msg=2564467]
Then, cutting natural material. STEAK, tender juicy steak!
[attach id=0 msg=2564467]
Both blades cut meat with no issues just as I suspected.
👍 OHT. 👍 Opinel.I can only admit, this was a tough challenge and I suffered through as tough as it was. Whew

Nicely done.
Interestingly… the other inspiration I had when coming up with this challenge was from cutting meat that has been trussed with butcher’s twine. I was cutting it up on a camping trip. Not only was it getting dark in the evening, but cooking it outdoors had caused it to puff up and I couldn’t find the butchers twine so I couldn’t cut it off first. So as I sliced through the meat I would get caught up in the twine.
If I hadn’t been using my skeletool it would have been a bit more difficult.
-
Day 21
Packages inbound per USPS informed delivery service containing 3 sharps.
The BLUE SIGNAL is on standby…
[attach id=0 msg=2564550]
Just need to convince it to allow me to fold the blade back while we wait!

-
Package one, SIBNAL had no issues beside tape residue, and found this YELLOW SPARTAN wrapped securely inside.
[attach id=0 msg=2564573]
-
And, package 2, same seller!
WENGER HIGHLANDER Serrated main blade, like a small Tinker.
And, a 58mm RUBY ROVER, with small flat blade combo tool.[attach id=0 msg=2564574]

-
Kudos to AzteCypher for the tease😎.
Just had to check out the WENGER wicked (combo) edge for MYSELF!

Thank you my friend! -
Day 20 (catching up)
Right tool for the job mini-challenge
The job was cutting a piece of elastic cord that was preventing me from wearing some new boots. Both edges did it equally well. My experience has been that serrated edges are best on thick synthetic line (that's Sailor-speak for rope), but plain edges work better for me in all other jobs.
[attach id=0 msg=2564588]
Day 21
The USCK is posing with a friend.
[attach id=1 msg=2564588]


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login








