Victorinox 2026 changes
-
SC in Silvertech is still 1.6794 so without pen I think.
-
@Reinier said:
Also: https://www.victorinox.com/en/Products/Swiss-Army-Knife™-and-Tools/Outdoor/Emergency-Tool-Huntsman-Lite/p/1.7915.E808I see where the ETool is on YOUR link. It still isn't on the Victorinox US site that I get directed to by my search engine. G -
Ah you're right. I really thought I was on the US site. It's not listed on the en-US version like you said.
-
Thanks for the update, Gary.
I agree the Outdoor Master Mic knives won’t be missed. IMO, they were ridiculously overpriced for what they were. Vic even demonstrated this themselves when they came out with the Venture (which is about the same size as the large Outdoor Master Mic, for less than half the price of the small).
I was bummed when the SG Climber was discontinued, so looking forward to hopefully having a 91mm SG model available again.
-
The SAK makers always claimed they made their knives with red handles so they could be found if you dropped them. I dropped my 108mm GAK in the grass once, and I am here to tell you it wasn't easy to find. The Stay Glow models take that 'findability' to a new level. I like them.
Once upon a time when the Kilobyte roamed the earth CASE knives came with either bone or yellow handles. I hated the yellow (maize) ones. Then in school my pal Lewis had a yellow one. He said it was perfect because when he laid it down somewhere, he could always find it. A light went on. CASE wasn't just short of cow bones. The yellow handles actually had a purpose.
I bought into the idea. I think I only have one yellow handled knife now (not a CASE or SAK). Anything to make them easier to locate is fine by me. I actually like the looks, too. Best wishes. G

-
Regarding your comments on the SILVER TECH scales.
I do not recall them being discounted.
On the SWISS CHAMP I purchased at the first of the year, I found it on the river site for $95, but the SAPPHIRE was $77.
My ST SC did not include a PEN or plus scales, or a PIN, but did have a PIN hole on the back scale.If I had gotten the Sapphire, it would have checked awl the boxes. Plus scales, pressurized ink PEN, a small screw driver in the cork screw and a PIN tucked into the scale.
I much appreciate your text for its informative content! Also, on the first reading I was lulled to sleep for a nap, to be woken an hour later to the shrill of my phone. I had gotten up to early and apparently was sleep deprived.
😊

Ps: Isn’t your 108mm GAK Green in color?
-
Great I've talked myself out of the emergency Huntsman as it was too expensive and such to order easily. Now I won't have the excuse.
-
Am surprised no one is chatting about that newer Victorinox.
https://www.victorinox.com/en-US/Products/Swiss-Army-Knife™-and-Tools/Essentials/Synergy-X-Alox/p/0.8226.26First thing I noticed, why did they do THAT to the can opener. I use can openers way more than I do bottle openers. Bottle openers are a convenience and can be found almost everywhere, even on the side of rolling tool chests. But not so much can openers, and they tend to get lost and I'm whipping out my Roxon to open a can for people at work (break room).
But, meh, don't really care for their locking blade when they messed up their can opener for a box cutter. Seriously?!?
Edit: Something weird going on when trying to post the link in the words.
-
@IMR4198 said:
The SAK makers always claimed they made their knives with red handles so they could be found if you dropped them. I dropped my 108mm GAK in the grass once, and I am here to tell you it wasn't easy to find. The Stay Glow models take that 'findability' to a new level. I like them.
Once upon a time when the Kilobyte roamed the earth CASE knives came with either bone or yellow handles. I hated the yellow (maize) ones. Then in school my pal Lewis had a yellow one. He said it was perfect because when he laid it down somewhere, he could always find it. A light went on. CASE wasn't just short of cow bones. The yellow handles actually had a purpose.
I bought into the idea. I think I only have one yellow handled knife now (not a CASE or SAK). Anything to make them easier to locate is fine by me. I actually like the looks, too. Best wishes. G

I’m also a fan of brightly colored handles, for exactly the reason you stated.
I find it disappointing and frustrating that so many manufacturers seem to think the best colors for knife handles are black, OD green, and or brown.
-
@Outback in Idaho said:
Am surprised no one is chatting about that newer Victorinox.
https://www.victorinox.com/en-US/Products/Swiss-Army-Knife™-and-Tools/Essentials/Synergy-X-Alox/p/0.8226.26First thing I noticed, why did they do THAT to the can opener. I use can openers way more than I do bottle openers. Bottle openers are a convenience and can be found almost everywhere, even on the side of rolling tool chests. But not so much can openers, and they tend to get lost and I'm whipping out my Roxon to open a can for people at work (break room).
But, meh, don't really care for their locking blade when they messed up their can opener for a box cutter. Seriously?!?
Edit: Something weird going on when trying to post the link in the words.
That model was new a while ago (not new for 2026), so there are other threads about it.
Totally agree with you re can opener vs. the package opener.
-
The Senergy line is a line for urban based users that have can openers in a kitchen drawer or a can opener sitting on the counter top with a color coordinated case, or activation button.
I never looked them seriously, thought the COMBO tool was incorporated instead of the cap lifter.
For me, the riveted pocket clip, seems a poor engineering decision.
-
@LoopCutter said:
Regarding your comments on the SILVER TECH scales.I do not recall them being discounted.
On the SWISS CHAMP I purchased at the first of the year, I found it on the river site for $95, but the SAPPHIRE was $77.
My ST SC did not include a PEN or plus scales, or a PIN, but did have a PIN hole on the back scale.
I much appreciate your text for its informative content! Also, on the first reading I was lulled to sleep for a nap, to be woken an hour later to the shrill of my phone. I had gotten up to early and apparently was sleep deprived.😊

Ps: Isn’t your 108mm GAK Green in color?
If you think the Silvertech SC wasn't discounted, then check out the current price. Yes, the 108 is green. Good to know that my post was a drug-free sleep aid. Best wishes. G
[attach id=0 msg=2567422]

-
@Outback in Idaho said:
Am surprised no one is chatting about that newer Victorinox.
https://www.victorinox.com/en-US/Products/Swiss-Army-Knife™-and-Tools/Essentials/Synergy-X-Alox/p/0.8226.26First thing I noticed, why did they do THAT to the can opener. I use can openers way more than I do bottle openers. Bottle openers are a convenience and can be found almost everywhere, even on the side of rolling tool chests. But not so much can openers, and they tend to get lost and I'm whipping out my Roxon to open a can for people at work (break room).
But, meh, don't really care for their locking blade when they messed up their can opener for a box cutter. Seriously?!
Edit: Something weird going on when trying to post the link in the words.
Yes, the Synergy series are new to the 2026 catalog as well. We have sort of talked about those things already, so I didn't mention them for the sake of brevity. They are interesting. I think the last thread I started here a couple of days ago was about one of them (Onefold), so I am aware of them. If anyone wants to make comments about them here, they are more than welcome. Likewise for the red Cellidor Companion. Best wishes. G

-
Can I ask a daft question? Does the pin and pen slot really compromise the structural integrity of the Silvertech scales?
Really?
-
I also didn't say anything about the bladeless models. We have all seen them. How about a photo of the Synergy offering for someone who hasn't seen the new catalog yet? Best wishes. G
[attach id=0 msg=2567428]

-
@Fast Bill said:
Can I ask a daft question? Does the pin and pen slot really compromise the structural integrity of the Silvertech scales?
Really?
The plus scales (pin and ballpoint pen) are supported differently than the usual scales. A different arrangement of 'ribs' on the plus scales. Is one stronger than the other? Who knows? I think we came up with the idea that the Swisstech scales are likely clear with some sort of paint on the underside. Putting something scratchy (pin and pen) might disturb the paint and make a headache for Victorinox to correct as a warranty issue. The idea that Silvertech scales are painted on the underside might or might not be correct. That is how they appear. I only have one SAK with those scales and I'm not about to pry off the scales and mess them up to prove it or disprove it. If anyone succumbs to the curiosity itch and decides to risk scutching up theirs to learn the truth, the only thing I can say is go for it. Best wishes. G
-
@IMR4198 said:
The idea that Silvertech scales are painted on the underside might or might not be correct. That is how they appear. I only have one SAK with those scales and I'm not about to pry off the scales and mess them up to prove it or disprove it. If anyone succumbs to the curiosity itch and decides to risk scutching up theirs to learn the truth, the only thing I can say is go for it. Best wishes. G

Pretty sure we had an older thread where a member created some really neat (but time and work intensive) GITD scales by stripping the silver paint off a set of silvertech scales and then putting GITD epoxy (or something like that) inside. So they are in fact painted.
EDIT: Yes, and credit to Huntsman for digging this one up recently in response to the thread about finding one’s SAK in the dark…
/topic/82762
-
Just to make it clear, my SILVERtech scales have pin hole behind the corkscrew.
The confusion may be if the pin is included on the particular model or not.It does appear the molding of the back SCALE is different than other 91mm translucent scales.
Therefore, plus style is not made, and the Ink PEN slot is not included.
They may change production at some point, but at this point, I have no idea.
-
@Fast Bill said:
Can I ask a daft question? Does the pin and pen slot really compromise the structural integrity of the Silvertech scales?
Really?
If one had the apparatus to perform a scientific comparison, perhaps or perhaps not.
But as a practical matter, I can’t see it making any difference. Cellidor is the weakest of the scale materials, especially since Vic went to hollow scales. If one is going with cellidor, I don’t see how plus scales would be meaningfully weaker than non-plus cellidor. If a robust option is desired, metal scales are probably the best choice, followed by maybe nylon or micarta.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login