Victorinox 2026 changes
-
@IMR4198 said:
The SAK makers always claimed they made their knives with red handles so they could be found if you dropped them. I dropped my 108mm GAK in the grass once, and I am here to tell you it wasn't easy to find. The Stay Glow models take that 'findability' to a new level. I like them.
Once upon a time when the Kilobyte roamed the earth CASE knives came with either bone or yellow handles. I hated the yellow (maize) ones. Then in school my pal Lewis had a yellow one. He said it was perfect because when he laid it down somewhere, he could always find it. A light went on. CASE wasn't just short of cow bones. The yellow handles actually had a purpose.
I bought into the idea. I think I only have one yellow handled knife now (not a CASE or SAK). Anything to make them easier to locate is fine by me. I actually like the looks, too. Best wishes. G

I’m also a fan of brightly colored handles, for exactly the reason you stated.
I find it disappointing and frustrating that so many manufacturers seem to think the best colors for knife handles are black, OD green, and or brown.
-
@Outback in Idaho said:
Am surprised no one is chatting about that newer Victorinox.
https://www.victorinox.com/en-US/Products/Swiss-Army-Knife™-and-Tools/Essentials/Synergy-X-Alox/p/0.8226.26First thing I noticed, why did they do THAT to the can opener. I use can openers way more than I do bottle openers. Bottle openers are a convenience and can be found almost everywhere, even on the side of rolling tool chests. But not so much can openers, and they tend to get lost and I'm whipping out my Roxon to open a can for people at work (break room).
But, meh, don't really care for their locking blade when they messed up their can opener for a box cutter. Seriously?!?
Edit: Something weird going on when trying to post the link in the words.
That model was new a while ago (not new for 2026), so there are other threads about it.
Totally agree with you re can opener vs. the package opener.
-
The Senergy line is a line for urban based users that have can openers in a kitchen drawer or a can opener sitting on the counter top with a color coordinated case, or activation button.
I never looked them seriously, thought the COMBO tool was incorporated instead of the cap lifter.
For me, the riveted pocket clip, seems a poor engineering decision.
-
@LoopCutter said:
Regarding your comments on the SILVER TECH scales.I do not recall them being discounted.
On the SWISS CHAMP I purchased at the first of the year, I found it on the river site for $95, but the SAPPHIRE was $77.
My ST SC did not include a PEN or plus scales, or a PIN, but did have a PIN hole on the back scale.
I much appreciate your text for its informative content! Also, on the first reading I was lulled to sleep for a nap, to be woken an hour later to the shrill of my phone. I had gotten up to early and apparently was sleep deprived.😊

Ps: Isn’t your 108mm GAK Green in color?
If you think the Silvertech SC wasn't discounted, then check out the current price. Yes, the 108 is green. Good to know that my post was a drug-free sleep aid. Best wishes. G
[attach id=0 msg=2567422]

-
@Outback in Idaho said:
Am surprised no one is chatting about that newer Victorinox.
https://www.victorinox.com/en-US/Products/Swiss-Army-Knife™-and-Tools/Essentials/Synergy-X-Alox/p/0.8226.26First thing I noticed, why did they do THAT to the can opener. I use can openers way more than I do bottle openers. Bottle openers are a convenience and can be found almost everywhere, even on the side of rolling tool chests. But not so much can openers, and they tend to get lost and I'm whipping out my Roxon to open a can for people at work (break room).
But, meh, don't really care for their locking blade when they messed up their can opener for a box cutter. Seriously?!
Edit: Something weird going on when trying to post the link in the words.
Yes, the Synergy series are new to the 2026 catalog as well. We have sort of talked about those things already, so I didn't mention them for the sake of brevity. They are interesting. I think the last thread I started here a couple of days ago was about one of them (Onefold), so I am aware of them. If anyone wants to make comments about them here, they are more than welcome. Likewise for the red Cellidor Companion. Best wishes. G

-
Can I ask a daft question? Does the pin and pen slot really compromise the structural integrity of the Silvertech scales?
Really?
-
I also didn't say anything about the bladeless models. We have all seen them. How about a photo of the Synergy offering for someone who hasn't seen the new catalog yet? Best wishes. G
[attach id=0 msg=2567428]

-
@Fast Bill said:
Can I ask a daft question? Does the pin and pen slot really compromise the structural integrity of the Silvertech scales?
Really?
The plus scales (pin and ballpoint pen) are supported differently than the usual scales. A different arrangement of 'ribs' on the plus scales. Is one stronger than the other? Who knows? I think we came up with the idea that the Swisstech scales are likely clear with some sort of paint on the underside. Putting something scratchy (pin and pen) might disturb the paint and make a headache for Victorinox to correct as a warranty issue. The idea that Silvertech scales are painted on the underside might or might not be correct. That is how they appear. I only have one SAK with those scales and I'm not about to pry off the scales and mess them up to prove it or disprove it. If anyone succumbs to the curiosity itch and decides to risk scutching up theirs to learn the truth, the only thing I can say is go for it. Best wishes. G
-
@IMR4198 said:
The idea that Silvertech scales are painted on the underside might or might not be correct. That is how they appear. I only have one SAK with those scales and I'm not about to pry off the scales and mess them up to prove it or disprove it. If anyone succumbs to the curiosity itch and decides to risk scutching up theirs to learn the truth, the only thing I can say is go for it. Best wishes. G

Pretty sure we had an older thread where a member created some really neat (but time and work intensive) GITD scales by stripping the silver paint off a set of silvertech scales and then putting GITD epoxy (or something like that) inside. So they are in fact painted.
EDIT: Yes, and credit to Huntsman for digging this one up recently in response to the thread about finding one’s SAK in the dark…
/topic/82762
-
Just to make it clear, my SILVERtech scales have pin hole behind the corkscrew.
The confusion may be if the pin is included on the particular model or not.It does appear the molding of the back SCALE is different than other 91mm translucent scales.
Therefore, plus style is not made, and the Ink PEN slot is not included.
They may change production at some point, but at this point, I have no idea.
-
@Fast Bill said:
Can I ask a daft question? Does the pin and pen slot really compromise the structural integrity of the Silvertech scales?
Really?
If one had the apparatus to perform a scientific comparison, perhaps or perhaps not.
But as a practical matter, I can’t see it making any difference. Cellidor is the weakest of the scale materials, especially since Vic went to hollow scales. If one is going with cellidor, I don’t see how plus scales would be meaningfully weaker than non-plus cellidor. If a robust option is desired, metal scales are probably the best choice, followed by maybe nylon or micarta.
-
People crack the cellidor scales along with the ABS scales. Nylon might be tougher than either, but I broke the nylon scales on my 108mm. Nothing is completely people-proof. I have some broken solid cellidor as well that I have glued back together. So far, I haven't busted any of the ABS, but I haven't dropped one either. Best wishes. G
:ahhh -
@IMR4198 said:
People crack the cellidor scales along with the ABS scales. Nylon might be tougher than either, but I broke the nylon scales on my 108mm. Nothing is completely people-proof. I have some broken solid cellidor as well that I have glued back together. So far, I haven't busted any of the ABS, but I haven't dropped one either. Best wishes. G
:ahhhLike I said, I think metal is the best choice for something as close to bulletproof as possible. To that end, I have alox in various sizes, along with some factory stainless steel, and at least one aftermarket Ti.
Alox have taken drops onto concrete with only minor cosmetic damage.
-
I had a thread wherein I posted some photos of some of my ABS scales side-by-side to try to show why the Silvertech ones were much more difficult to do as a plus scale. Let me try to find the photos. So here's why I think it's tough to do the Silvertech with plus scales — the Emerald Compact seems to have non-hollow backside plus scales. I think that would add some cost to the Silvertech scales and also make the frontside and backside scales mismatch a bit insofar as only the former would have those 'ribs' whereas the latter wouldn't (if that makes sense).



-
I don't think any of the see-through scales are solid. They are just a different configuration in the plus models. As for the alox, I mentioned that as a possibly desirable option for something like the SwissChamp. Others said it wouldn't be possible to have back tools with alox.
I see no mechanical, practical, or moral reasons not to have alox scales WITH back tools. Victorinox hasn't seen fit to do it, because they can use the springs which something like the Pioneer uses for their alox models. There is no other reason for not having back tools on an alox except that Victorinox just doesn't want to. Would it cost extra? Of course. Would buyers grab them up anyway. Again, of course.
The back side alox scale would be a little tricky since there isn't enough thickness to cover up the largely obsolete corkscrew. That could be worked around, as well as figuring out a way to include the tweezers or whatever. Still not impossible. Someone would need to make a back side scale with a cutout maybe. Or just drop the corkscrew for a thinner tool like a phillips driver. Details. Best wishes. G

-
Thanks to friend Tuisto for his excellent photo. Perhaps someone with a busted ABS plus scale has taken one off. Then they can report about the internal construction first hand. I don't have anything with a plus scale, and likewise I wouldn't pry one off anyway unless it was a necessity. Best wishes. G

-
So, that was kinda what I was trying to depict with the Emerald scales, since it seems for all the world like they may be solid (or at the very least more solid than the ice blue Cybertool M scales). But I'm not sure now about it. I'm going to try to take some more photos of the Emerald plus scale.
-
@IMR4198 said:
The plus scales (pin and ballpoint pen) are supported differently than the usual scales. A different arrangement of 'ribs' on the plus scales. Is one stronger than the other? Who knows? I think we came up with the idea that the Swisstech scales are likely clear with some sort of paint on the underside. Putting something scratchy (pin and pen) might disturb the paint and make a headache for Victorinox to correct as a warranty issue.
The idea that Silvertech scales are painted on the underside might or might not be correct. That is how they appear. I only have one SAK with those scales and I'm not about to pry off the scales and mess them up to prove it or disprove it. If anyone succumbs to the curiosity itch and decides to risk scutching up theirs to learn the truth, the only thing I can say is go for it. Best wishes. G

Thanks @IMR4198 I'd never thought much about the way the Silvertech scales are coloured but they are different and that would make (some) sense.

-
@IMR4198 said:
..... The catalog is very much like the one from two years ago. The same meaningless categories where there is the same attempt to group SAKs according to appropriate usage. The old-fashioned idea of starting with the smaller knives and going up in size as the catalog progresses has been poo-pooed by the catalog crafters. Leatherman did the same sort of foolishness in their catalogs.Thanks for this great analysis Gary

I tried to make some sense of it and I think I concluded that:
**Everyday **= Smaller/thinner SAKs of all lengths - And < 3 layers (except the Explorer, for some reason!!)
The category incudes Personal Care: Nailcare/Swiss cards etc
And Food and Drink Models - Wine and Cheese Masters etc - At least that one makes some sense!!!**Outdoor: **They seem to have decided means any model with a ***saw ***- Plus the 111mm range and very large (ie long models) - Includes subcategory Sports Models (obvious I guess) Fisherman, GolfTool etc
**Trades and Crafts: **They seem to have decided means any model with a file or pliers - including the iconic SwissChamp!!
To me this categorisation is pretty meaningless and very unhelpful.

What if I want to carry a saw or file everyday - But I am not going outdoors or and am not a tradesman? ???

What if I like carrying the SwissChamp everyday - As I like to be prepared!! Is it not an EDC item?
???I like the old size progression and organisation - Starting with length and going up the layers for each length
Seemed to make sense to me!! And was easy to follow.Maybe they could put and index, or key, in the catalog - with some of the above categorisations or even tools
Eg If you want a knife with a saw try these models on pages x,y,z etc
But wait ..... You are better going to SAKWiki for that !!!I did check out the LM site recently and, like you said, they had the same meaningless categorisations - moving on from the nice easy to follow size organisational structure.
The hilarious thing I found there was pretty much every model was in every category section

I guess they don't want any model to miss out on being selectedSo for both vendors you have to ask yourself - "What is the point of these sections?" !!
*And your categorisations are almost certainly not the same as many members of the public and potential users of your tools !! * -
I suspect that the categories are an attempt to make it easier/less intimidating for new/casual users.
The theory sometimes referred to as the Paradox of Choice suggests that too many options can result in increased anxiety, decreased satisfaction, slower or delayed decision-making, and potentially even lower sales.
Of course, those of us who are already experts in these MT manufacturers’ product lines (pretty much everyone who hangs around this forum) will complain that that the categories are meaningless (and in some ways that’s true), as an indexed approach (e.g. sorting by length and number of layers) or matrixed approach (e.g. how can I figure out which models include both a saw and scissors?) would better serve our purposes.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login