Giants of June / Big Blades Challenge - June 2026
-
@IMR4198 said:
"Get ready to throw stuff out. We are just about in that blind curve with no witnesses just past the witch house. "
"Throw stuff out? I'm still eating."
"THROW IT OUT! WE"RE ALMOST THERE!"
"Okay, I'm throwing. Get a grip."
"Whew, that was close. Where's the kid?"
"Oops."
Best wishes. G

@nate j said:

This isn’t (necessarily) a contest to see who can carry the largest blade. But if it was, you, sir, would clearly be winning (thus far).


-
<u>Day 2</u>
The wife wasn't looking this time. So I was able to sneak in some taquitos for lunch.

I have enough to share if anyone wants any.
-
Day 3:
Opinel no.13:

Sent from my iPhone using Tapatalk
-
Day 3
The state DOT used to keep equipment and employees to cut along the right-of-way areas. Cost too much, I suppose. Then they started hiring contractors to do the work. This year, it looks like nobody is going to do it.
I always cut a big swath of weeds around my mailbox. That keeps the pretty mail girl from having a frowny face and also keeps my mailbox from being knocked down/run over by the dudes with the tractors. That was part of what I did yestiddy. Picked up a few things. Didn't pick up someone's narsty kleenex they so thoughtfully tucked up next to my mailbox.
Green things grow like a jungle in this part of NC. Road signs are covered by now. Trees and bushes are grown out into the roadways. I can't even see the Ms. Phoenix estate for all the overhanging crapola. I looked at the ancient utility pole in my yard and saw a Virginia creeper had grown clear to the top. I nipped it over the weekend.
Does anyone have an idea of why CASE put the serrated strip on the top of the skinner blade? The top corners of the blades are already sharp enough to make shavings from your fingernails. The serrations are just another exposed sharp surface. I have had several 6265s through the years. This is the first one with the serrations. They are so far from the handle, that it would be impossible to use them for anything as you are holding the knife. Not really practical to grip just the blade while you are using the knife either. Too much weight behind your hand that way.
Best wishes. G
:ahhh
[attach id=0 msg=2575083]
-
Day 3
Boker XXL Kalashnikov arrived!

-
Boker looks nice. I would be afraid to carry something like that. Goober would follow me around saying 'citizen's aRAYest' and then Barney would have to funble around in his pocket for his bullet.
No opinions about the serrated section on the big CASE? MTO is supposed to be the suppository for all knife knowledge. Maybe everyone knows and just don't want to embarrass me over such an obvious answer.
Best wishes. G

-
Day 3
It'll be much easier to get action shots of these next week. For now, here's a shot of the skinner (no serrations on my top, Gary) with the model stamp.
I get that it's a Capital H Hunting knife, but I don't love the skinner here. In my mind, it's too close to the master clip point. If I get two blades, I like one to be full pointy, and one minimally so (say a sheepsfoot). Given their love of the pattern, I'm surprised Case didn't go all in on a BIG Trapper and give us a spey.
[attach id=0 msg=2575135]
If you consult your Case Pattern Guide PDF you'll see that this is a 6: Bone, 2 Blade, 65 Pattern (two blade folding hunter) in carbon steel. The first number is the handle material, which you can memorize if you're an even bigger nerd than me, and the second is the number of blades. To the best of my knowledge, the last 2 don't follow any pattern, and get reassigned from time to time, so good luck with that. The steel marking (SS or CS) is a relatively new addition (I'll do the date code tomorrow), which I greatly appreciate when shopping second hand. Before, you had to look for the yellow handle or hope the seller knew what they were talking about and were honest.
Case's stainless is servicable. It doesn't rust without abuse, takes and holds and okay edge, but nothing exciting. Other big American companies like KaBar (CROVAN) or Buck (420HC) manage to make even old school stainless impress. For Case, make mine carbon.

-
@IMR4198 said:
No opinions about the serrated section on the big CASE?I would call it jimping; I’m not 100% certain of its purpose in this context, but I do have some theories:
Enhance grip when choking up on the skinner blade for detail work - I think this is the strongest possibility, though as you say, it’s a fair amount of weight to hold by pinching the blade between one’s fingers.
Enhance grip on knife when clip point blade is open - I find it has this effect, though not sure this is the intended purpose.
Fish scaler - unlikely, due to the short length of the section
Ferro rod striker - Might work for this purpose, but I think the design predates the ferro rod striker craze.
Aesthetics - Never discount the possibility that a design decision was made just to look cool and hopefully sell more knives.
Help prevent knife from sliding out of sheath/pocket - May have this effect, but don’t believe this would be the reason for the design
-
I like the big Boker so far. Blade is D2 which I have no real opinion of thus far, although I've had a few D2 knives. I just haven't abused any of them, so I have no idea how well it holds up. I've gotta say that D@ is very, very popular which I usually take as a red flag. But so far they seem to be holding up.
I would prefer no blade coating, as on my Boker lockback soddy in D2. It's actually beginning to develop a bit of patina, which is a point in its favor. But unlike my Boker Strike auto with its somewhat rough textured blade coating, the coating on this one is smooth. That will be advantageous for food prep.
This has a clip as well as a lanyard hole. I generally prefer a lanyard, but it's nice to have options. With a knife this size and being automatic, the clip might be the better way to carry it. It only has a button; no safety lock. But the button is smooth and doesn't stand proud. Maybe it will be ok.
Boker automatics tend to have a soft spring. My old Magnum doesn't, but my Strike does. It's ok on the Strike; just not very fast. I read some reviews that said it was not strong enough on the XXL. Fortunately, BladeHQ (where I bought this one) XXLs are custom built with a stronger spring. It seems perfect to me.
I think I'm gonna like it.
-
The date stamp on my CASE is for 2020. The grater section could very well be just cosmetic. It is surprising how many different companies have produced practically the same model for their line. Best wishes. G

-
@nate j said:
I would call it jimping; I’m not 100% certain of its purpose in this context, but I do have some theories:Enhance grip when choking up on the skinner blade for detail work - I think this is the strongest possibility, though as you say, it’s a fair amount of weight to hold by pinching the blade between one’s fingers.
Enhance grip on knife when clip point blade is open - I find it has this effect, though not sure this is the intended purpose.
Fish scaler - unlikely, due to the short length of the section
Ferro rod striker - Might work for this purpose, but I think the design predates the ferro rod striker craze.
Aesthetics - Never discount the possibility that a design decision was made just to look cool and hopefully sell more knives.
Help prevent knife from sliding out of sheath/pocket - May have this effect, but don’t believe this would be the reason for the design
I think the ferro rod striker idea is the correct one. Yes the basic pattern predates the ferro rod poplularity, but the older ones don't have the serration. That's a new addition.
@IMR4198 said:
The date stamp on my CASE is for 2020. The grater section could very well be just cosmetic. It is surprising how many different companies have produced practically the same model for their line. Best wishes. G

I was just looking at Boker's similar offerings in 1095 steel. Still made in Germany, too. And the price is actually less than a Case. I'm tempted. Very tempted.
-
@WECSOG said:
I like the big Boker so far. Blade is D2 which I have no real opinion of thus far, although I've had a few D2 knives. I just haven't abused any of them, so I have no idea how well it holds up. I've gotta say that D@ is very, very popular which I usually take as a red flag. But so far they seem to be holding up.I would prefer no blade coating, as on my Boker lockback soddy in D2. It's actually beginning to develop a bit of patina, which is a point in its favor. But unlike my Boker Strike auto with its somewhat rough textured blade coating, the coating on this one is smooth. That will be advantageous for food prep.
This has a clip as well as a lanyard hole. I generally prefer a lanyard, but it's nice to have options. With a knife this size and being automatic, the clip might be the better way to carry it. It only has a button; no safety lock. But the button is smooth and doesn't stand proud. Maybe it will be ok.
Boker automatics tend to have a soft spring. My old Magnum doesn't, but my Strike does. It's ok on the Strike; just not very fast. I read some reviews that said it was not strong enough on the XXL. Fortunately, BladeHQ (where I bought this one) XXLs are custom built with a stronger spring. It seems perfect to me.
I think I'm gonna like it.

In my experience with D2, it is a solid enough option. Not stainless though.
-
@BPRoberts said:
Day 3
I get that it's a Capital H Hunting knife, but I don't love the skinner here. In my mind, it's too close to the master clip point. If I get two blades, I like one to be full pointy, and one minimally so (say a sheepsfoot). Given their love of the pattern, I'm surprised Case didn't go all in on a BIG Trapper and give us a spey.Case's stainless is servicable. It doesn't rust without abuse, takes and holds and okay edge, but nothing exciting. Other big American companies like KaBar (CROVAN) or Buck (420HC) manage to make even old school stainless impress. For Case, make mine carbon.
For what it is supposed to do, having a skinner blade for field dressing and skinning, and a clip point blade (perhaps the best all-around blade shape IMO) for everything else makes a lot of sense to me.
They aren’t quite the size of the 65 pattern (and their blades don’t meet the 4” minimum for this challenge), but Case’s 54 pattern Trapper (middle) and 75 pattern Moose (bottom) are both sizeable (over 4” closed) pocket knives with your preferred combination of blades.
I agree Case’s standard stainless steel gets the job done, but is nothing to write home about. I do appreciate the Cases I’ve managed to collect with 154CM, ATS-34, S35VN, and 20CV.
I also agree Buck’s 420HC is probably better than Case’s usual stainless.
KA-BAR’s Cro-Van is actually 1095, however, so not stainless.
Since I got a 65 pattern (SS blades, black canvas micarta slabs) in the pic, we’ll call this my Day 3:

-
Day 3
Here you go, Nate!
[attach id=0 msg=2575190]

-
Roach belly again, ST300, Streamlight 2lx (iirc),Glock 17 gen5. The empty mag holder usually holds my phone.
-
@nate j said:
For what it is supposed to do, having a skinner blade for field dressing and skinning, and a clip point blade (perhaps the best all-around blade shape IMO) for everything else makes a lot of sense to me.They aren’t quite the size of the 65 pattern (and their blades don’t meet the 4” minimum for this challenge), but Case’s 54 pattern Trapper (middle) and 75 pattern Moose (bottom) are both sizeable (over 4” closed) pocket knives with your preferred combination of blades.
I agree Case’s standard stainless steel gets the job done, but is nothing to write home about. I do appreciate the Cases I’ve managed to collect with 154CM, ATS-34, S35VN, and 20CV.
I also agree Buck’s 420HC is probably better than Case’s usual stainless.
KA-BAR’s Cro-Van is actually 1095, however, so not stainless.
Since I got a 65 pattern (SS blades, black canvas micarta slabs) in the pic, we’ll call this my Day 3:
I stand corrected on the Cro-Van. Learn something every day.
I have a 54 or two, but I usually wind up reaching for a 75 Stockman if I'm going to carry in that size (awlthough the Trapper's spey is appreciably larger). The 75 Moose is probably #1 on my Vault wishlist, but I haven't talked myself into putting out the money for one on ebay yet.
-
<u>Day 3</u>
Whipped out my over sized letter opener today. My wife gave me one of these today -
- when I explained why I was doing it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
