Giants of June / Big Blades Challenge - June 2026
-
Day 4
We interrupt your regularly scheduled knife picture for a lunch adventure! Normally, I just pack lunch, but it was a slow day today, so I treated myself to a walk to the strip mall down the road. I put in my order and had just sat down, when someone came in and said there was a fire outside. I went over with the cashier, and there was a small fire (but visible flames not just a smolder) in the mulch pit by the door. She asked me if I'd use the fire extinguisher by the door, and I did. The pin-tie was stronger than I feel like they usually are, and for a sec I thought I might have to try to cut it, but it finally gave after the third pull. Mulch fires are an issue in the summer around here. They usually don't get too big, but a couple years ago a hotel had multiple beds go up in sequence and had to call the fire department. Glad we got this one while it was still easy to control.

-
@powernoodle said:
Awesome big blades, peoples.
I love the big expanses of steel, especially in the Cold Steel variants.
PNI’ll be posting some pics of my big Cold Steel knives before this challenge is done.
-
@BPRoberts said:
Day 4We interrupt your regularly scheduled knife picture for a lunch adventure! Normally, I just pack lunch, but it was a slow day today, so I treated myself to a walk to the strip mall down the road. I put in my order and had just sat down, when someone came in and said there was a fire outside. I went over with the cashier, and there was a small fire (but visible flames not just a smolder) in the mulch pit by the door. She asked me if I'd use the fire extinguisher by the door, and I did. The pin-tie was stronger than I feel like they usually are, and for a sec I thought I might have to try to cut it, but it finally gave after the third pull. Mulch fires are an issue in the summer around here. They usually don't get too big, but a couple years ago a hotel had multiple beds go up in sequence and had to call the fire department. Glad we got this one while it was still easy to control.
Glad you were able to get the fire out!

Seems like those plastic ties are not the right thing for that job if they don’t reliably break with one reasonably stout pull and have to be cut off.

-
Glad you got that fire taken care of. Do you know what set off the fire? The internal heat perhaps?
<u>Day 4</u>
Wanted some afternoon coffee but I didn't want it in the Keurig as I wanted stronger coffee than what it normally makes. So I took matters into my own hands.

-
Day 5
A photo of CASE with some dandelions. Not really. The yellow fringy things are hawkweed. It used to be only on a back lot on the property. Now it is all over. Mow it one day, watch it blooming again a couple of days later. The purple blind nettle was making a strong showing early this year, but seems to have lost out to dry weather and the hawkweek. RIP. I have pictures in my mind of the hawkweed sneaking out of its bed at nights and strangling the poor defenseless purple dead nettle. After all it is blind and can't see the hawkweed swooping down on it. Aaargh! Help! Help! I do have a bumper crop of mock strawberries this year. Look just like a strawberry except the flowers are yellow instead of white. Perhaps they have a cohabitational sharing deal with the aggressive hawkweed. "We will just stay here at ground level and you can keep the high ground." Some call these things Indian strawberries. I'm not sure why. No Indian would eat these things. Maybe I should take a photo of some buck thorn next time? Maybe not. Just so you know, I did buzz the hawkweed down with my weedwacker. Probably already growing back. Best wishes. G
[attach id=0 msg=2575346]
-
I don't think I ever owned one of the pre-dot CASE folding hunters. That was why the pin pattern on friend WECSOG's nice knife looked strange to me. I did have one or two with the lanyard holes. I think I had one bone-stag? Might be wrong about that. Too much water has gone over the dam to swear to it. All the rest were laminated wood. This last one is the only one I had with the toothy skinner blade.
I saw where the CASE 6265 with laminated wood costs $136.99 from CASE. Suggested retail, I suppose. My friendly local ACE dealer has one in the display for $79 unless he has sold it. He also has an Uncle Henry display somewhere. I wonder if there might be an old stock King Ranch stockman in the back of that display? I might be tempted to buy an old US made Uncle Henry.
Someone said they had a new US marked Old Timer stockman. I looked it up. Doesn't look like the old ones. Maybe jigged bone instead of delrin? Hard to tell. I stopped looking when I saw it cost over $80.
Best wishes. G

-
@IMR4198 said:
The date stamp on my CASE is for 2020. The grater section could very well be just cosmetic. It is surprising how many different companies have produced practically the same model for their line. Best wishes. G

I have to make a correction. The date stamp on my CASE 6265 is for the year 2000. I don't know why they don't just stamp the year on them and be done with it. Best wishes. G
:ahhh -
@IMR4198 said:
I have to make a correction. The date stamp on my CASE 6265 is for the year 2000. I don't know why they don't just stamp the year on them and be done with it. Best wishes. G
:ahhhThey did just put the date on them for a few years, from about 1990 to 1993. But it turned out collectors actually liked the old date codes better, so Case went back to date codes.
-
@nate j said:
Glad you were able to get the fire out!

Seems like those plastic ties are not the right thing for that job if they don’t reliably break with one reasonably stout pull and have to be cut off.

I don't feel like I've ever had to yank on one that hard before. Not sure if this one maybe just wasn't cut properly. I did get it without using the knife, just took more effort than it should've.
@AzteCypher said:
Glad you got that fire taken care of. Do you know what set off the fire? The internal heat perhaps?I do not know. We see them flare up "spontaneously" sometimes in the summer from a combination of the heat, sun absorbtion (especially near blacktop lots) and (I've been told) internal composting. There were some cigarette butts around, but none obviously lit when I got there.
-
Day 5:
Lajolo Master Sefender:

Sent from my iPhone using Tapatalk
-
My internet was complete smash last night, so here is yesterday's pic:
Day 4
Spyderco Resilience
[attach id=0 msg=2575367]

-
@powernoodle said:
Awesome big blades, peoples.
I love the big expanses of steel, especially in the Cold Steel variants.Some great blades here! I will definitely be showing more CS!
-
@BPRoberts said:
Day 4We interrupt your regularly scheduled knife picture for a lunch adventure! ....

-
@TexasAKM said:
My internet was complete smash last night, so here is yesterday's pic:Day 4
Spyderco Resilience
[attach id=0 msg=2575367]
How's your Resilience? I got one last year, intending for it to be my main knife for the challenge, and it was pretty junky. Could never get the action quite right, and the pocket clip fell apart in my pocket.
-
Day 4
Here’s a big CS for y’all: large Espada. That’s not a Classic in the pic for scale; it’s a (91mm) Deluxe Tinker.

-
Yowza! Now that's a knife!

-
@nate j said:
Day 4Here’s a big CS for y’all: large Espada. That’s not a Classic in the pic for scale; it’s a (91mm) Deluxe Tinker.
That is a big knife. Deluxe Tinker is one of my favorite SAKs.
@IMR4198 said:
I don't think I ever owned one of the pre-dot CASE folding hunters. That was why the pin pattern on friend WECSOG's nice knife looked strange to me. I did have one or two with the lanyard holes. I think I had one bone-stag? Might be wrong about that. Too much water has gone over the dam to swear to it. All the rest were laminated wood. This last one is the only one I had with the toothy skinner blade.
I saw where the CASE 6265 with laminated wood costs $136.99 from CASE. Suggested retail, I suppose. My friendly local ACE dealer has one in the display for $79 unless he has sold it. He also has an Uncle Henry display somewhere. I wonder if there might be an old stock King Ranch stockman in the back of that display? I might be tempted to buy an old US made Uncle Henry.
Someone said they had a new US marked Old Timer stockman. I looked it up. Doesn't look like the old ones. Maybe jigged bone instead of delrin? Hard to tell. I stopped looking when I saw it cost over $80.
Best wishes. G

I like the old US made Uncle Henry, especially the LB7. I'll take an old LB7 over a Buck 110 any day. I even like the new ones, now that Schrade got their act together. I have two US LB7s, and two new ones.
Day 5: National Doughnut Day!
I was tempted to order one of the Dessert Warrior knives that several companies make, in honor of Donut Day. But I resisted. I probably won't even have a donut today, unless my wife brings some home.
Today's pic has nothing to do with all that. Boker giant AK opens a new package.

-
Day 5
My Resilience again, I carry this one almost constantly.
[attach id=0 msg=2575400]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
completely about the tea. I do enjoy sweet tea a lot, but, like Gary, try to limit my consumption due to sugar content.