Giants of June / Big Blades Challenge - June 2026
-
@IMR4198 said:
The date stamp on my CASE is for 2020. The grater section could very well be just cosmetic. It is surprising how many different companies have produced practically the same model for their line. Best wishes. G

I have to make a correction. The date stamp on my CASE 6265 is for the year 2000. I don't know why they don't just stamp the year on them and be done with it. Best wishes. G
:ahhh -
@IMR4198 said:
I have to make a correction. The date stamp on my CASE 6265 is for the year 2000. I don't know why they don't just stamp the year on them and be done with it. Best wishes. G
:ahhhThey did just put the date on them for a few years, from about 1990 to 1993. But it turned out collectors actually liked the old date codes better, so Case went back to date codes.
-
@nate j said:
Glad you were able to get the fire out!

Seems like those plastic ties are not the right thing for that job if they don’t reliably break with one reasonably stout pull and have to be cut off.

I don't feel like I've ever had to yank on one that hard before. Not sure if this one maybe just wasn't cut properly. I did get it without using the knife, just took more effort than it should've.
@AzteCypher said:
Glad you got that fire taken care of. Do you know what set off the fire? The internal heat perhaps?I do not know. We see them flare up "spontaneously" sometimes in the summer from a combination of the heat, sun absorbtion (especially near blacktop lots) and (I've been told) internal composting. There were some cigarette butts around, but none obviously lit when I got there.
-
Day 5:
Lajolo Master Sefender:

Sent from my iPhone using Tapatalk
-
My internet was complete smash last night, so here is yesterday's pic:
Day 4
Spyderco Resilience
[attach id=0 msg=2575367]

-
@powernoodle said:
Awesome big blades, peoples.
I love the big expanses of steel, especially in the Cold Steel variants.Some great blades here! I will definitely be showing more CS!
-
@BPRoberts said:
Day 4We interrupt your regularly scheduled knife picture for a lunch adventure! ....

-
@TexasAKM said:
My internet was complete smash last night, so here is yesterday's pic:Day 4
Spyderco Resilience
[attach id=0 msg=2575367]
How's your Resilience? I got one last year, intending for it to be my main knife for the challenge, and it was pretty junky. Could never get the action quite right, and the pocket clip fell apart in my pocket.
-
Day 4
Here’s a big CS for y’all: large Espada. That’s not a Classic in the pic for scale; it’s a (91mm) Deluxe Tinker.

-
Yowza! Now that's a knife!

-
@nate j said:
Day 4Here’s a big CS for y’all: large Espada. That’s not a Classic in the pic for scale; it’s a (91mm) Deluxe Tinker.
That is a big knife. Deluxe Tinker is one of my favorite SAKs.
@IMR4198 said:
I don't think I ever owned one of the pre-dot CASE folding hunters. That was why the pin pattern on friend WECSOG's nice knife looked strange to me. I did have one or two with the lanyard holes. I think I had one bone-stag? Might be wrong about that. Too much water has gone over the dam to swear to it. All the rest were laminated wood. This last one is the only one I had with the toothy skinner blade.
I saw where the CASE 6265 with laminated wood costs $136.99 from CASE. Suggested retail, I suppose. My friendly local ACE dealer has one in the display for $79 unless he has sold it. He also has an Uncle Henry display somewhere. I wonder if there might be an old stock King Ranch stockman in the back of that display? I might be tempted to buy an old US made Uncle Henry.
Someone said they had a new US marked Old Timer stockman. I looked it up. Doesn't look like the old ones. Maybe jigged bone instead of delrin? Hard to tell. I stopped looking when I saw it cost over $80.
Best wishes. G

I like the old US made Uncle Henry, especially the LB7. I'll take an old LB7 over a Buck 110 any day. I even like the new ones, now that Schrade got their act together. I have two US LB7s, and two new ones.
Day 5: National Doughnut Day!
I was tempted to order one of the Dessert Warrior knives that several companies make, in honor of Donut Day. But I resisted. I probably won't even have a donut today, unless my wife brings some home.
Today's pic has nothing to do with all that. Boker giant AK opens a new package.

-
Day 5
My Resilience again, I carry this one almost constantly.
[attach id=0 msg=2575400]

-
That's a great photo with the peppers. Best wishes, G

-
Day 5
Buck 119 Special
This one is probably about 20 years old. Today’s Bucks are about the same IMO, but the sheaths were far better then.

-
Day 5
Since we've been talking about dating and tang stamps, you can consult your handout from the other day (or this link, with slightly different info) for more on dating your Case.
[attach id=0 msg=2575408]
You'll see the example here uses the modern CASE XX and has 6 dots, meaning it's from 2024.
I awlso don't love the "remove dots" style. Honestly, I like Buck's "weird symbol" system.

-
@BPRoberts said:
How's your Resilience?I have 3, two with g10 handles, and one with frn handles. They have been good knives, had the g10s for a few years, and the frn fora year. I have taken them apart for cleaning, and the the inner scales on the frn don't look quite as good as the other two, but that is splitting hairs. They have held up well. Sorry to hear yours has not.
-
<u>Day 5</u>
Package detail today.

-
Day 6
Cold Steel Kudu. It's cheap, lightweight and meets the criteria. What more can I say?
Oh, and it helped me reach the free shipping threshold for an order. By that token it wasn't just cheap; it was free!
-
Day 6:
Extrema Ratio Arditi:

Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login