Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 4
Removed the foil from some meds, I found a use


-
Day 3
Adding a lanyard to the Skipper
Orange paracord with a double snake knot and 2 celtic button knot beads.
I can never remember my knots so I always have to YT a tutorial for these. Usualy a random 'ranger bead/pave counter' video since both knots are standard for that project.
The spike came in handy for keeping things strait while tieing and later while dressing the beads for working loose loops out.jpg)
.jpg)
-
@Noa Isumi said:
Day 3
Adding a lanyard to the Skipper
Orange paracord with a double snake knot and 2 celtic button knot beads.
I can never remember my knots so I always have to YT a tutorial for these. Usualy a random 'ranger bead/pave counter' video since both knots are standard for that project.
The spike came in handy for keeping things strait while tieing and later while dressing the beads for working loose loops outNice work and cool use.
Day 3
Prepping for a cruise. I think this loadout should cover most of the bases, and should get through security. Apparently there are aftermarket scales for the Companion w/ toothpick, tweezers, pin, and pen, just like Plus scales. Might have to look into those.
Tools:
- Ruler/file/flat driver
- Can/bottle opener
- Scissors
- Marlin spike
- Bit driver w/ #2 phillips

-
[day 3]
It helps to stay on course when reading in public.
[attach id=0 msg=2583519]

-
Day 4 of 30
Today used spike to poke holes on plastic just for fun, knife was used to tear boxes
[attach id=0 msg=2583543]

-
This one has to be my absolute first riggers that I bought on the Outer Banks, sometimes in the late 80's.
.jpg)
-
@AzteCypher said:
<u>Day 3</u>
Making sure the Myerchin gets some R&R as well.

I sure like the size of your Myerchin. All mine are like 4 - 4.5 inches.
-
@BPRoberts said:
Nice work and cool use.Day 3
Prepping for a cruise. I think this loadout should cover most of the bases, and should get through security. Apparently there are aftermarket scales for the Companion w/ toothpick, tweezers, pin, and pen, just like Plus scales. Might have to look into those.
Tools:
- Ruler/file/flat driver
- Can/bottle opener
- Scissors
- Marlin spike
- Bit driver w/ #2 phillips
A marlinspike for the Roxon? That's really cool.
-
Day 4
How about a Midshipman's Hitch around a marlin spike? (Technically, I tied the knot freehand and then slid it over, which is sometimes the easier way to use it.) I've been told this is the best general purpose friction hitch, though for most people's basic camping and yardwork applications I suspect two-half-hitches, a taut-line, etc. would be fine. None of them is particularly difficult, so might as well learn the "best" one. The standard use is to adjust the tension on a line to do something like tie off a guyline on a tent, but being able to make and change the size of a loop is really useful in general.
<u>Directions:</u>
-
Run your rope around whatever you're securing to (tent stake, dock, pole, etc.) The other end will attach to something that you are trying to tension (tarp, grommet, hammock, etc.)
-
Pass the working end (the one you're tying with) over the standing end (the other one), then forward, under, and into the loop.
-
Bring the working end up, over and out of the loop, take it in front of and under the standing end (still working on the outside of the loop)
-
Bring it back under and out of the loop. You should now have two wraps around the standing end inside the loop.
-
Go out and over the standing end (outside the loop) again. Wrap around and bring the working end through the 3rd (outside) wrap that you just made.
-
Pull tight and check.
<u>How to check:</u>
-
Does it slide? The purpose of this knot is to create an adjustable length loop, primarily to put more or less tension on a line. Slide the knot way from the anchor and the loop gets bigger "using" more rope. Slide it snug to the anchor and the loop gets smaller, reducing tension.
-
Visually, you should see 2 loops on the front of the rope, with your working end coming up between them, followed by a third loop on the back. The taut-line hitch (the most likely miss-tie) has the two inner loops together, with the working end outside.
Great video here:
https://www.youtube.com/watch?v=bMZtTUTg_mEAnd of course, the classic animated knots.

-
-
Day 4
Myerchin Ti Captain on cigar duty. Blade works better than spike for this task.

-
Day 4
Yep, knife works on cardboard..jpg)
-
-
<u>Day 4</u>
I'm going to show the clove hitch as that's the first knot my dad taught me. He used it to tie down hogs when he was a kid. We'll pretend the spike is a hog's leg. :D
We'll start with creating a loop passing the cord under the beginning of the cord.

The we'll grab the loose end of cord and creating the same loop again making sure the loose end passes underneath the cord.

Then you pull both ends tight.

Thanks for coming to my mini-Ted talk. :D
-
Thanks AC

Day 5

-
My West Marine (SOG) rigging knife.
[attach id=0 msg=2583618]
Description from West Marine...
This special knife was manufactured by SOG® exclusively for West Marine. It features a glass-reinforced G-10 handle that’s impervious to salsmurfer. It has a stainless steel straight blade (non-locking) that’s ideal for cutting natural or synthetic rope. It also contains a 3" marlinespike. The push-button lock secures the marlinespike in the open position to ensure safe use. Includes shackle key and lanyard ring.Key Features
Great knife for cutting through Dyneema, Vectran or other synthetic fibers
3" locking marlinespike for prying those stubborn knots apart
Sheepsfoot blade for safety with shackle key
Handle is made from glass-reinforced G-10 so it's impervious to salsmurfer and practically indestructable.
-
Day 04

-
[Day 4]
[attach id=0 msg=2583627]
-
Day 5 of 30
Today used spike to poke holes on my lunch package before putting in to microwave
[attach id=0 msg=2583639]

-
Day 5
Turns out that the Myerchin Ti Crew is an appropriate size and weight to allow it ride unobtrusively in the pocket of my work khakis…

-
I very much agree that the titanium crew is a convenient size for carry. The fact that you get a marlin spike as well as a blade and it still weighs less than knives of comparable size is a bonus.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
