Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Day 16 late entry
The first gen TF377P titanium crew knife carries tip up and the shackle just makes an awful racket, bouncing as you walk. Tink, tink, tink. Adding the counterweight of the shark bottle opener helped a little but it's still irritating.


-
Day 17
The second generation TF377 titanium crew knife carries tip down and has a bail for attaching a lanyard that serves no other function, as opposed to the shackle of the first gen that serves as the lock release for both the blade and the spike. I prefer the tip up carry so you're pulling the knife from your pocket in the right position to put it into immediate use. Tip down has to be rotated in the hand before you can open and use it. The bail doesn't rattle as much as the shackle on the first gen, but it still makes an annoying click with every step you take to the point of your stopping and asking, "what the Smurf is that clicking noise?" which is why I added the 2-inch piece of paracord, just to stop the clicking.


-
I really like the shackle on the first generation, large enough to attach almost any snap to it . That's an issue with many riggers these days.
-
Finally got the length on the finishing half round braid.
It's about 15 inches, which is really too long to realistically use, but I have my trusty jig that I'll use to measure it down.
Bryon Toss b says in the instructions that the total length of the lanyard should go around the wrist 1 and a half times, meaning that this final braid should be about 9 inches. I'm personally thinking that I'd attach it to a belt and be able to use the spike for paracord, if it was closer to the 15 inch length.
I'm not sure what tomorrow will bring, but the finish line is in sight.

[attach id=0 msg=2585009]

-
@PitCarver said:
Finally got the length on the finishing half round braid.
It's about 15 inches, which is really too long to realistically use, but I have my trusty jig that I'll use to measure it down.
Bryon Toss b says in the instructions that the total length of the lanyard should go around the wrist 1 and a half times, meaning that this final braid should be about 9 inches. I'm personally thinking that I'd attach it to a belt and be able to use the spike for paracord, if it was closer to the 15 inch length.
I'm not sure what tomorrow will bring, but the finish line is in sight.

[attach id=0 msg=2585009]
Well, 1.5 times around my wrist would be pretty close to 15 inches.

-
Day 15
RR with scrimshaw #1


-
Day 16
RR with scrimshaw #2


-
Oh my goodness, Nate.
Those scrimshaws look really nice.Question about the RR's, in general.
I read something rhe other night saying that the spike lock is dangerous and doesn't lock up right.
Anything to that? -
Day 15
It's awlmost an awl!

-
-
@PitCarver said:
Oh my goodness, Nate.
Those scrimshaws look really nice.
PC!@PitCarver said:
Question about the RR's, in general.
I read something rhe other night saying that the spike lock is dangerous and doesn't lock up right.
Anything to that?Those are the only two RR marlin spikes I have. Locked open, one has a very slight amount of vertical play, while the other has none. I was not able to get either one to fail/collapse, even with what I would describe as a significant amount of force.
I don’t see anything inherently unsound about the design. It appears the same as on my Colonial Rigging Knife, and others.
So, there doesn’t seem to be a problem with my examples, though I can’t say that no one else has a problem with theirs.
But I definitely question how dangerous it would actually be, even if the lock did fail.
The sides are rounded of course, and the tip isn’t terribly pointy, as marlin spikes go. If one could get something worse than bruised knuckles/hand out of the deal, I’d be very surprised, and even that might be a stretch.
Also, one of the advantages of curved spikes is that they index well. So if one has to really apply a lot of force, it’s easy and logical to do so in the direction that would tend to force the knife open.
Worth noting, too, that while I do prefer a locking spike, there are certainly functional folding marlin spikes that don’t lock.
And if someone was forcefully and repeatedly stabbing hard objects, and the lock eventually gave, well, that’s an ID10T problem, not an issue with the lock.
-
Day 18
Some great knives awl
having to resist checking their prices 
Just back from work, no uses today


-
Day 18 of 30
Today blade opened package what contained my latest purchase
[attach id=0 msg=2585073]

-
I prefer a curved spike also, Nate.
And with a constant taper.Now I'm still trying to think about how long I want my lanyard to be. Got all of the extra stuff (needle, nylon thread, etc) to dive in but all I can seem to do is procrastinate a bit more.
Time for my half cigar.

-
Day17
Late (took this last night but didnt post)Skipper is sad
Skipper is mad
I burned my shrimp
Now its flavorless and bad.Hey that rhymes

My only night off and I was looking forward to a good meal only to mess it up

.jpg)
-
I was doing some research in a group that I belong to and found this pic,that I shared in 2015, with the 3 blade rigger and the second riggers lanyard that I ever made.

-
MINI CHALLENGE 3: UNSHACKLED
The shackle key is probably the most obscure tool for most people on a rigging knife. Find a use for it. If you can't (or if your knife doesn't have one), show us a cool key, or a cool shackle.
Day 16
Finally home and mostly settled. The spike fits in the mini flex companion as well.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


