Hello Sailor! Marlin Spike/Rigging Knife Challenge - August 2026
-
Finally got the length on the finishing half round braid.
It's about 15 inches, which is really too long to realistically use, but I have my trusty jig that I'll use to measure it down.
Bryon Toss b says in the instructions that the total length of the lanyard should go around the wrist 1 and a half times, meaning that this final braid should be about 9 inches. I'm personally thinking that I'd attach it to a belt and be able to use the spike for paracord, if it was closer to the 15 inch length.
I'm not sure what tomorrow will bring, but the finish line is in sight.

[attach id=0 msg=2585009]

-
@PitCarver said:
Finally got the length on the finishing half round braid.
It's about 15 inches, which is really too long to realistically use, but I have my trusty jig that I'll use to measure it down.
Bryon Toss b says in the instructions that the total length of the lanyard should go around the wrist 1 and a half times, meaning that this final braid should be about 9 inches. I'm personally thinking that I'd attach it to a belt and be able to use the spike for paracord, if it was closer to the 15 inch length.
I'm not sure what tomorrow will bring, but the finish line is in sight.

[attach id=0 msg=2585009]
Well, 1.5 times around my wrist would be pretty close to 15 inches.

-
Day 15
RR with scrimshaw #1


-
Day 16
RR with scrimshaw #2


-
Oh my goodness, Nate.
Those scrimshaws look really nice.Question about the RR's, in general.
I read something rhe other night saying that the spike lock is dangerous and doesn't lock up right.
Anything to that? -
Day 15
It's awlmost an awl!

-
-
@PitCarver said:
Oh my goodness, Nate.
Those scrimshaws look really nice.
PC!@PitCarver said:
Question about the RR's, in general.
I read something rhe other night saying that the spike lock is dangerous and doesn't lock up right.
Anything to that?Those are the only two RR marlin spikes I have. Locked open, one has a very slight amount of vertical play, while the other has none. I was not able to get either one to fail/collapse, even with what I would describe as a significant amount of force.
I don’t see anything inherently unsound about the design. It appears the same as on my Colonial Rigging Knife, and others.
So, there doesn’t seem to be a problem with my examples, though I can’t say that no one else has a problem with theirs.
But I definitely question how dangerous it would actually be, even if the lock did fail.
The sides are rounded of course, and the tip isn’t terribly pointy, as marlin spikes go. If one could get something worse than bruised knuckles/hand out of the deal, I’d be very surprised, and even that might be a stretch.
Also, one of the advantages of curved spikes is that they index well. So if one has to really apply a lot of force, it’s easy and logical to do so in the direction that would tend to force the knife open.
Worth noting, too, that while I do prefer a locking spike, there are certainly functional folding marlin spikes that don’t lock.
And if someone was forcefully and repeatedly stabbing hard objects, and the lock eventually gave, well, that’s an ID10T problem, not an issue with the lock.
-
Day 18
Some great knives awl
having to resist checking their prices 
Just back from work, no uses today


-
Day 18 of 30
Today blade opened package what contained my latest purchase
[attach id=0 msg=2585073]

-
I prefer a curved spike also, Nate.
And with a constant taper.Now I'm still trying to think about how long I want my lanyard to be. Got all of the extra stuff (needle, nylon thread, etc) to dive in but all I can seem to do is procrastinate a bit more.
Time for my half cigar.

-
Day17
Late (took this last night but didnt post)Skipper is sad
Skipper is mad
I burned my shrimp
Now its flavorless and bad.Hey that rhymes

My only night off and I was looking forward to a good meal only to mess it up

.jpg)
-
I was doing some research in a group that I belong to and found this pic,that I shared in 2015, with the 3 blade rigger and the second riggers lanyard that I ever made.

-
MINI CHALLENGE 3: UNSHACKLED
The shackle key is probably the most obscure tool for most people on a rigging knife. Find a use for it. If you can't (or if your knife doesn't have one), show us a cool key, or a cool shackle.
Day 16
Finally home and mostly settled. The spike fits in the mini flex companion as well.

-
That's a good looking RR nate!
<u>Day 17 - catch up</u>
One of the kids that was in this house throughout the day broke the toilet seat. Apparently no one know how it happened. >:(

-
<u>Day 19</u>
I know, I know... they're not good for me.
But they are pretty tasty. :D
P.S. Please don't tell my doc.
-
Day 18
The SOG Rigging Knife kept me company this afternoon while I took down a PowerLock for a deep cleaning and refurb. Got the handle and the plier jaw cleaned up and wire wheeled where it was the roughest. I also go the the pivot bolts and the inside tools all cleaned off. Tomorrow afternoon I will go through each remaining individual piece and get them back to serviceable condition.
JonesE
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




