Barlow Knife Challenge Sept 2026
-
Day 2
I've had mixed results with Boker, but I like this Barlow (from their Traditional 2.0 series). Great snap, decent steel, and the texture on the handle looks good and gives it some grip. Price is probably a little high at MSRP, but I think I got this one around half off.

-
@IMR4198 said:
That Colonial has been carried A LOT! That's a lot of service out of a giveaway promo knife. Bravo. Best wishes. G

Having worked on a farm that's been in operation a long long time, I can tell you that farmers use this kind of thing until they break. Someone gives them a halfway decent promotional item, and they'll be using it forever.
I have a mini metal clipboard I found in the barn that has the contact info for a local roofer, that lists a four-digit phone number. It's a somewhat rural area, so my guess is that it's probably pre-1970s.
-
Barlow Challenge
Day 2 of 30
Western Brand BarlowIt got near real warm here in SC today,,, popsicle was quite refreshing.
[attach id=0 msg=2586722]
.jpg)
-
@David Bowen said:
Also how do you guys carry your knife? loose? or use some sort of pocket pouch? I often carry other things as well so a good organizer is usually in my pocket.Depends…
Primary knife/tool without pocket clip - loose in RF pocket with wallet. I find the wallet often helps hold the knife in a consistent position, and sometimes helps prevent it from falling out.
Primary knife/tool with pocket clip - Clipped to RF mag pocket (preferred, if pants so equipped), or to RF pocket if no RF mag pocket
Supporting SAK #1: Vic Rambler - on key ring
Supporting SAK #2: Vic Alox Bantam - in wallet
-
@WECSOG said:
I prefer that the front pocket knife have a lanyard, since I also carry a Ruger LCR in a pocket holster.
As a general rule I don't like pocket clips, but I found that my Boker Kalashnikov XXL works well for clip carry. With a smaller knife the clip gets in the way. But strangely enough, with that huge Boker, the clip holds it out of the way; allowing me to slide the revolver out past it where a smaller clipped knife would snag.I don’t carry a gun in a pocket often these days, but when I do, absolutely nothing else goes in that pocket except the gun in its pocket holster. (I also had to train my wife and kids that they do not, under any circumstances, stick their hands in my pockets. ::) )
Potential consequences of having other items in the same pocket include accidental/negligent discharge, and fouling your own draw.
I hate to preach, but would feel badly if something happened later, and I had passed up the opportunity to say something now.
-
<u>Day 2 - over do</u>
Finally cut loose the slave cylinder so I can install it. The original banjo bolt was pretty marred up. Went on the hunt for one but none of the auto parts store near me had the correct one. Have to order it online.


-
Day 2
Each blade has nail grooves on both sides. With both blades closed, however, each of the “inside” grooves is inaccessible due to the opposite blade, and only the “outside” grooves can be used.


-
@nate j said:
I don’t carry a gun in a pocket often these days, but when I do, absolutely nothing else goes in that pocket except the gun in its pocket holster. (I also had to train my wife and kids that they do not, under any circumstances, stick their hands in my pockets. ::) )Potential consequences of having other items in the same pocket include accidental/negligent discharge, and fouling your own draw.
I hate to preach, but would feel badly if something happened later, and I had passed up the opportunity to say something now.
I've carried that way for many years, and drawn from it quite a few times. And it's in a pocket holster so no AD.
-
Day 3
Schrade Grand-Dad's Barlow No. 206. I don't remember where or when I got this, but I'm pretty sure I've had it for over 30 years.

-
Day 2
Cripple Creek again today
-
Day 03
Cigar time.

-
Day 3
Worked from home today and got some much needed catching up. Got a package from Vixino and the Barlow helped me free it's brethren. Quick look at the Baby Bronto which gets released today. This is cool to me because with a design of my own being produced by them I get a feel of what they're capable of quality wise.
![ResizedImage_2026-09-03_05-44-12_9989[1].jpg](/assets/uploads/_imported_attachments/migrated/605962_ResizedImage_2026-09-03_05-44-12_9989%5B1%5D.jpg)
![ResizedImage_2026-09-03_05-44-12_0574[2].jpg](/assets/uploads/_imported_attachments/migrated/605963_ResizedImage_2026-09-03_05-44-12_0574%5B2%5D.jpg)
-
Day 3
Barlow in front of a compooter monitor. Yawn.Best wishes. G

[attach id=0 msg=2586758]
-
Day 3
[attach id=0 msg=2586775]
BARLOW stamped on the bolster,
The Ideal U.S.A. On the tang.A pawn shop find a while ago.
This definitely was a $1 knife on display by the register.
The liners are just a tad larger than the scales and the back pin is broken on the back side, so the scale slides.Ideal reminds me of a novelty company that makes throw away stuff.
Surprising is that pull is at least a 7.5 or 8 on both blades and yet a solid seal closing.

-
Day 3
LionSteel Warhorse on cigar duty. Clip point blade has become my “clean” blade on this knife.

-
Your LIONSTEEL is a handsome knife.
-
Nothing going on today that'll require my Barlow except the need for a glamour shot.

-
@LoopCutter said:
Your LIONSTEEL is a handsome knife.
-
A DAY 3 +
[attach id=0 msg=2586792]
Looks good paired together…


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


