Barlow Knife Challenge Sept 2026
-
Has anyone had their hands on the new Bear Piranha? Pen blade and some sources are reporting spear point, others sheepsfoot, with a lockback. Looks kinda nice. Not Barlow shaped, but maybe a distant cousin.
@Alan K. said:
Day 09I checked the archive. There is no mention whatsoever of Walmart's Swiss Tech Doppelt Barlow anywhere on this site. Zero, nada, zilch. So, I've decided to use the opportunity of the Barlow challenge to be the sacrificial lamb, or Guinnea pig. I'm your huckleberry. I recently saw a couple of videos where the You Tubers mentioned that the Doppelt was still showing at the full price of $34.99 if you looked at Walmart's website, but you might get it close to half off if you went to the store. I bought this one, new in the box, on E-bay for $16 plus shipping and tax so I think I got a pretty good deal. Doppelt apparently means double in Swiss, and they call it that because the 2 blades are the same length. They're about as sharp as you get out of the box with a cheap knife which is not very. I may have to work on that. The clip point blade is very pointy. More likely to poke oneself than cut oneself. I think I would have liked it better if the sheepsfoot blade were serrated for cutting fibrous materials. So far, I like the F&F. It is easy to open with a pinch grip or using the nail nicks which run the full length of both blades more like a fuller. Not really a half stop, but the blade reaches a point where you do have to push harder to close it the rest of the way. I like it and will try to get more use out of it over the next few days.

When a Trapper and a Barlow love each other very much... It is a nice blade combo (though I agree with your point on serrations), might try to find one if you give it the okay.
Day 9
Beer Tender helped with an orange; blade to score it and lifter to peel it. I am pondering doing a slight mod to the cap lifter to make it usable as a screwdriver or something, but unsure. Open to suggestions/advice if anyone has tried something similar.
[attach id=0 msg=2587479]

-
Day 9

The no-name from Pakistan accompanied me today, helped out with a very exciting mail call (oodles of SAKs) that I'll share here eventually!
-
@SteveC - Nice Ulster!
@LoopCutter - I'll bet that's exactly how it happened!

@Alan K - That's not a bad looking Swiss Tech. I see they have a green one too.
<u>Day 9</u>
It was a long day.... Fought with my work laptop several times as it rebooted twice throughout the day while I was in the middle of something. This this generator fought me for a good hour until it finally cooperated. Didn't get to use the Case but it was standing at the ready to give me a hand.

-
@Alan K. said:
Day 09I checked the archive. There is no mention whatsoever of Walmart's Swiss Tech Doppelt Barlow anywhere on this site. Zero, nada, zilch. So, I've decided to use the opportunity of the Barlow challenge to be the sacrificial lamb, or Guinnea pig. I'm your huckleberry. I recently saw a couple of videos where the You Tubers mentioned that the Doppelt was still showing at the full price of $34.99 if you looked at Walmart's website, but you might get it close to half off if you went to the store. I bought this one, new in the box, on E-bay for $16 plus shipping and tax so I think I got a pretty good deal. Doppelt apparently means double in Swiss, and they call it that because the 2 blades are the same length. They're about as sharp as you get out of the box with a cheap knife which is not very. I may have to work on that. The clip point blade is very pointy. More likely to poke oneself than cut oneself. I think I would have liked it better if the sheepsfoot blade were serrated for cutting fibrous materials. So far, I like the F&F. It is easy to open with a pinch grip or using the nail nicks which run the full length of both blades more like a fuller. Not really a half stop, but the blade reaches a point where you do have to push harder to close it the rest of the way. I like it and will try to get more use out of it over the next few days.

I recalled a knife influencer, Thrifyy Kaniffy review this a couple years ago, and found his video on YOU Tube.
Was favorable for a $34 item and steel is Aus08.I recalled looking a couple time but never saw at my Wally Stores.
-
@BPRoberts said:
Other people w/ the Bear/Queen Barlows, how's your snap? Most of mine are rather weak. I have a few others of the Nü Queens (Stockmans and such) and they're more reasonable.I only have the one Bear & Sons. The snap on mine is week.
Something else that I have also realized is the main blade nail nick is partially blocked by the bottle opening blade.
@BPRoberts said:
Day 9Beer Tender helped with an orange; blade to score it and lifter to peel it. I am pondering doing a slight mod to the cap lifter to make it usable as a screwdriver or something, but unsure. Open to suggestions/advice if anyone has tried something similar.
[attach id=0 msg=2587479]
I had the same thought on the cap lifter. I thought of grinding it to be a useful driver. I also thought of sharpening the edge/corner so it could work as package opener. Or if you have talent make it like the SAK Executive orange peeler.

-
Day 9
The Cripple Creek helped clear a circle for my alcohol stove to make some coffee. I use the blade to cut the roots of some weeds. It was a little overkill, but goal accomplished with a good cup of coffee.

-
Day 9
Case has had some questionable quality years, but the F&F on this Case Barlow is as good or better than any other knife I own.

-
30 Day Barlow Knife Challenge
Day 9 of 30
Camillus 51Pretty simple day.
[attach id=0 msg=2587491]
.jpg)
-
30 Day Barlow Knife Challenge
Day 10 of 30
Old Queen brand[attach id=0 msg=2587492]
.jpg)
-
Day 10
I brought a Barlow to the tire shop in case anybody needed something to be Barlowed. Nope. Best wishes. G

[attach id=0 msg=2587495]
-
Day 10
Yesterday it was pointed out that CASE places the nail Nick on the back side of the 2 bladed BARLOWS
and a theory was offered to how that ingenious idea could have occurred 🤔I have one 2 bladed CASE, and that is how it is cut. But, will note that I one Rough Ryder and a Queen (SMKW), also made in the same fashion.
[attach id=0 msg=2587498]

-
Day 10 +
And, I discovered I had 3 CASE BARLOWs.
[attach id=0 msg=2587499]
Awl 3 are on display in my wall display, the 6.5 Bone Stag is in another location away from the Lady Case and Kentucky Bluegrass.

-
Day 10
Letter opening was easy for the Swiss Tech Doppelt.


-
Day 10
Case Barlow on cigar duty…

-
@LoopCutter said:
Day 10Yesterday it was pointed out that CASE places the nail Nick on the back side of the 2 bladed BARLOWS
and a theory was offered to how that ingenious idea could have occurred 🤔I have one 2 bladed CASE, and that is how it is cut. But, will note that I one Rough Ryder and a Queen (SMKW), also made in the same fashion.
[attach id=0 msg=2587498]
Interesting, and good to know.

Day 10
Case opens a package.

-
Many companies have put the pen blade on the pile side on their Jack knives. Great Eastern Cutlery has even alternated positions on the same model made in different years. The model #77 comes to mind.
-
Day 10
C. Johnson Lambsfoot Barlow made by I*XL George Wostenholm

-
Playing ketchup, today.
Mrs. Grumpy took me to my eye doctors appointment, yesterday. Took the pic while waiting in her car for the and time. Forgot all about it until about 4;00AM when I finally remembered.
[attach id=0 msg=2587529]
Nothin much going on today.
[attach id=1 msg=2587529]

-
@PitCarver said:
Playing ketchup, today.
Mrs. Grumpy took me to my eye doctors appointment, yesterday. Took the pic while waiting in her car for the and time. Forgot all about it until about 4;00AM when I finally remembered.
[attach id=0 msg=2587529]
Nothin much going on today.
[attach id=1 msg=2587529]No worry, I have done that too!
Your White Barlow appears to have the pen blade nick cut on the pile side too!
Hope eyes are good.
FWIW, I had a dentist appointment yesterday to occupy my day.
They like enjoyed my company so much, they invited me to visit again next MONDAY. TALKED ABOUT ROOTing a canal or something under a bridge.
-
@SteveC said:
Many companies have put the pen blade on the pile side on their Jack knives. Great Eastern Cutlery has even alternated positions on the same model made in different years. The model #77 comes to mind.
I have a theory, but haven't tried to verify it. Maybe the pen blade is an existing part from another line, and perhaps there are a couple of different ones that have the nail nick on one side or the other. Then, when they do a run of Barlows, they use whichever pen blade they have the most of in stock; and select the blade order accordingly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login