Barlow Knife Challenge Sept 2026
-
Day 9
The Cripple Creek helped clear a circle for my alcohol stove to make some coffee. I use the blade to cut the roots of some weeds. It was a little overkill, but goal accomplished with a good cup of coffee.

-
Day 9
Case has had some questionable quality years, but the F&F on this Case Barlow is as good or better than any other knife I own.

-
30 Day Barlow Knife Challenge
Day 9 of 30
Camillus 51Pretty simple day.
[attach id=0 msg=2587491]
.jpg)
-
30 Day Barlow Knife Challenge
Day 10 of 30
Old Queen brand[attach id=0 msg=2587492]
.jpg)
-
Day 10
I brought a Barlow to the tire shop in case anybody needed something to be Barlowed. Nope. Best wishes. G

[attach id=0 msg=2587495]
-
Day 10
Yesterday it was pointed out that CASE places the nail Nick on the back side of the 2 bladed BARLOWS
and a theory was offered to how that ingenious idea could have occurred 🤔I have one 2 bladed CASE, and that is how it is cut. But, will note that I one Rough Ryder and a Queen (SMKW), also made in the same fashion.
[attach id=0 msg=2587498]

-
Day 10 +
And, I discovered I had 3 CASE BARLOWs.
[attach id=0 msg=2587499]
Awl 3 are on display in my wall display, the 6.5 Bone Stag is in another location away from the Lady Case and Kentucky Bluegrass.

-
Day 10
Letter opening was easy for the Swiss Tech Doppelt.


-
Day 10
Case Barlow on cigar duty…

-
@LoopCutter said:
Day 10Yesterday it was pointed out that CASE places the nail Nick on the back side of the 2 bladed BARLOWS
and a theory was offered to how that ingenious idea could have occurred 🤔I have one 2 bladed CASE, and that is how it is cut. But, will note that I one Rough Ryder and a Queen (SMKW), also made in the same fashion.
[attach id=0 msg=2587498]
Interesting, and good to know.

Day 10
Case opens a package.

-
Many companies have put the pen blade on the pile side on their Jack knives. Great Eastern Cutlery has even alternated positions on the same model made in different years. The model #77 comes to mind.
-
Day 10
C. Johnson Lambsfoot Barlow made by I*XL George Wostenholm

-
Playing ketchup, today.
Mrs. Grumpy took me to my eye doctors appointment, yesterday. Took the pic while waiting in her car for the and time. Forgot all about it until about 4;00AM when I finally remembered.
[attach id=0 msg=2587529]
Nothin much going on today.
[attach id=1 msg=2587529]

-
@PitCarver said:
Playing ketchup, today.
Mrs. Grumpy took me to my eye doctors appointment, yesterday. Took the pic while waiting in her car for the and time. Forgot all about it until about 4;00AM when I finally remembered.
[attach id=0 msg=2587529]
Nothin much going on today.
[attach id=1 msg=2587529]No worry, I have done that too!
Your White Barlow appears to have the pen blade nick cut on the pile side too!
Hope eyes are good.
FWIW, I had a dentist appointment yesterday to occupy my day.
They like enjoyed my company so much, they invited me to visit again next MONDAY. TALKED ABOUT ROOTing a canal or something under a bridge.
-
@SteveC said:
Many companies have put the pen blade on the pile side on their Jack knives. Great Eastern Cutlery has even alternated positions on the same model made in different years. The model #77 comes to mind.
I have a theory, but haven't tried to verify it. Maybe the pen blade is an existing part from another line, and perhaps there are a couple of different ones that have the nail nick on one side or the other. Then, when they do a run of Barlows, they use whichever pen blade they have the most of in stock; and select the blade order accordingly.
-
@WECSOG said:

I have a theory, but haven't tried to verify it. Maybe the pen blade is an existing part from another line, and perhaps there are a couple of different ones that have the nail nick on one side or the other. Then, when they do a run of Barlows, they use whichever pen blade they have the most of in stock; and select the blade order accordingly.
Could be

-
Day 10 🤠

-
Day 10
Never really thought about it because I freehand sharpened when I was really into traditional blades. Are they not normally at 20° per side? I know a lot of knives are free hand sharpened at the factory and that can be different from person to person who's doing the job. Went to put a good edge on the AG Russell because it's never had one. It's been slapped on a stone and I went about my day. Decided to put it in the KME since I have a clamp made for small knives and I was astonished when the blade angle was 25 or more. Now grated it's a thin blade already so it's not going to change performance a whole lot. I was going to match the factory. But I threw caution to the wind and put a 20° on it and went to 1500 and stropped with a micron paste. Old girl has never been so sharp wow. Defintly widened the edge bevel but it still looks good. Don't know if I want to attack the pen blade or leave it. Hmmmm

-
Bonus picture


-
Day 10

Brown-scaled Imperial again. I really like the curved blade on it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login