Barlow Knife Challenge Sept 2026
-
@LoopCutter said:
Day 10Yesterday it was pointed out that CASE places the nail Nick on the back side of the 2 bladed BARLOWS
and a theory was offered to how that ingenious idea could have occurred 🤔I have one 2 bladed CASE, and that is how it is cut. But, will note that I one Rough Ryder and a Queen (SMKW), also made in the same fashion.
[attach id=0 msg=2587498]
Interesting, and good to know.

Day 10
Case opens a package.

-
Many companies have put the pen blade on the pile side on their Jack knives. Great Eastern Cutlery has even alternated positions on the same model made in different years. The model #77 comes to mind.
-
Day 10
C. Johnson Lambsfoot Barlow made by I*XL George Wostenholm

-
Playing ketchup, today.
Mrs. Grumpy took me to my eye doctors appointment, yesterday. Took the pic while waiting in her car for the and time. Forgot all about it until about 4;00AM when I finally remembered.
[attach id=0 msg=2587529]
Nothin much going on today.
[attach id=1 msg=2587529]

-
@PitCarver said:
Playing ketchup, today.
Mrs. Grumpy took me to my eye doctors appointment, yesterday. Took the pic while waiting in her car for the and time. Forgot all about it until about 4;00AM when I finally remembered.
[attach id=0 msg=2587529]
Nothin much going on today.
[attach id=1 msg=2587529]No worry, I have done that too!
Your White Barlow appears to have the pen blade nick cut on the pile side too!
Hope eyes are good.
FWIW, I had a dentist appointment yesterday to occupy my day.
They like enjoyed my company so much, they invited me to visit again next MONDAY. TALKED ABOUT ROOTing a canal or something under a bridge.
-
@SteveC said:
Many companies have put the pen blade on the pile side on their Jack knives. Great Eastern Cutlery has even alternated positions on the same model made in different years. The model #77 comes to mind.
I have a theory, but haven't tried to verify it. Maybe the pen blade is an existing part from another line, and perhaps there are a couple of different ones that have the nail nick on one side or the other. Then, when they do a run of Barlows, they use whichever pen blade they have the most of in stock; and select the blade order accordingly.
-
@WECSOG said:

I have a theory, but haven't tried to verify it. Maybe the pen blade is an existing part from another line, and perhaps there are a couple of different ones that have the nail nick on one side or the other. Then, when they do a run of Barlows, they use whichever pen blade they have the most of in stock; and select the blade order accordingly.
Could be

-
Day 10 🤠

-
Day 10
Never really thought about it because I freehand sharpened when I was really into traditional blades. Are they not normally at 20° per side? I know a lot of knives are free hand sharpened at the factory and that can be different from person to person who's doing the job. Went to put a good edge on the AG Russell because it's never had one. It's been slapped on a stone and I went about my day. Decided to put it in the KME since I have a clamp made for small knives and I was astonished when the blade angle was 25 or more. Now grated it's a thin blade already so it's not going to change performance a whole lot. I was going to match the factory. But I threw caution to the wind and put a 20° on it and went to 1500 and stropped with a micron paste. Old girl has never been so sharp wow. Defintly widened the edge bevel but it still looks good. Don't know if I want to attack the pen blade or leave it. Hmmmm

-
Bonus picture


-
Day 10

Brown-scaled Imperial again. I really like the curved blade on it.
-
@mathmitch7 said:
Day 10
Brown-scaled Imperial again. I really like the curved blade on it.
That appears to be a CLIPPOINT blade. VERY effective and point cutter.
The IMPRRIAL 278 that arrived has a WHARNCLIFFE BLADE as a pen blade.
-
<u>Day 10</u>
Who knew that after a long day at work, working outside would bring my mind some peace. It was still racing at end of the day until I started working with my hands.
Opened a new package of leaf bags.

-
Day 11
I used a hole saw to cut some battery spacers out of genuine Ikeawood (TM), then trimmed to fit with the USA Imperial Barlow.

-
Day 11
Looks like friend WECSOG and I are the only US members awake at this dreadful hour. Perhaps coincidental that we both have an Imperial Barlow. I took a dopey photo of mine with my mowing hat. I think I will go back to bed. Best wishes. G:(
[attach id=0 msg=2587573]
-
You're not the only ones still awake. Day 11, a somber anniversary.
I attempted to sharpen a pencil with the sheepsfoot blade of the Swiss Tech Doppelt, and I have to say it was a complete success. The more I carry this knife the more I like it.


-
@Alan K. said:
You're not the only ones still awake. Day 11, a somber anniversary.I attempted to sharpen a pencil with the sheepsfoot blade of the Swiss Tech Doppelt, and I have to say it was a complete success. The more I carry this knife the more I like it.

It is so tempting to finally pull the trigger on the SwissTech. Be a good BO picture candidate 😉
I would have had one back when, but my Wally World never placed one one the shelf or in the locked cabinet.
I have found found one on the evil site, just over one state west of me

-
Looks like friend WECSOG and I are the only US members awake at this dreadful hour. Perhaps coincidental that we both have an Imperial Barlow. I took a dopey photo of mine with my mowing hat. I think I will go back to bed. Best wishes. G:(
[attach id=0 msg=2587573]DAY 11.
I will never forget! 🇺🇸
For once in a long while I was not up at that hour.But, I would have been prepared!!!

Yesterday POSTAL SERVICE FINALLY DELIVERED MY 278!
It took a couple of detours and two days in MEMPHIS! Barbecue was the excuse no doubt.
[attach id=0 msg=2587579] Imperial 278 on the left😉
First impressions, back springs are a solid 6.5 on the pull.
Main blade arrived sharp, but became smoother after a good stropping.
The pen blade, could not even tear paper with that edge. The grind was there, just had no edge.After a full treatment against the diamond plate and several passes across the ceramic rod, and then more with the grain of leather, it now cuts hair off my arm.
I was surprised it was a tad undersized. In the picture it is side by side with my favorite, a QUEEN (SMKW China)
But the bolster is proudly stamped. B A R L O W
A
to Gary for exhibiting his on day one.

-
Day 11
Thought I would have a relaxing morning on my day off but seems there's fires I had to put out at work. I've worked out a deal so our stores are selling that 3D realistic looking Japanese ice cream and still had a few that weren't in the system. I'm hoping they sell as well as the hype says. Going to spend some time in the word and find some peace before I go full throttle.

-
Japanese Ice Cream ??? Something new?
Never heard of it.And, never go from peace to full throttle, assured to blow a gasket😉
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login