SAK Stack Challenge 2026
-
@AzteCypher said:
Just fixing mine as I noticed I didn't put in the days.- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30)
- BPRoberts (30)
- MrToolJunkie (60)
I forgot too...
-
I'm happy to see several participants going for the 60!

I might have spent some more money on preparations for this one, today.

-
Do tell....

-
@AzteCypher said:
Do tell....
You'll find out when you find out!

-
I was leaning towards doing the PST in November, but I'm tempted to up it to 60...

-
@BPRoberts said:
I was leaning towards doing the PST in November, but I'm tempted to up it to 60...
Dew eeet!

-
Question for the mods: are any knives not specifically listed eligible for this challenge? For example, the Workchamp or Wenger's Champ?
Perhaps, any SAK with more than 5 layers? Looking at the various SAKs with 6 or more layers, I'm not seeing any that don't look like they would fit with the spirit of this challenge.
-
I am new to this category of SAK. You are hosting!
I was under the impression that 7 and 8 layer models were the intended participants!
There was a challenge earlier this year that included the 11 to 15 layer varients. Hosted by our BPRoberts.
You could further define the length to 91mm models only.
Or, include the WENGER 84 mm 7 and 8 layer models to expand the field.
Is the badge description more definitive?
From the award listing. 30 & 60 days are the same.
Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.
-
@LoopCutter said:
I am new to this category of SAK. You are hosting!I was under the impression that 7 and 8 layer models were the intended participants!
There was a challenge earlier this year that included the 11 to 15 layer varients. Hosted by our BPRoberts.
You could further define the length to 91mm models only.
Or, include the WENGER 84 mm 7 and 8 layer models to expand the field.
Is the badge description more definitive?
From the award listing. 30 & 60 days are the same.
Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.
I would like to call it any 85mm and up SAK with 6 or more layers. And I will, if nobody has a problem with it. But I wanted to put it out there first for the mods to see, in case any of them don't approve of it.
Wengers such as the Tool Chest are 85mm. The Tool Chest is specifically mentioned in the challenge description; the Wenger Champ is not though it is one more layer than the TC. In fact it is basically the equivalent of the Vic Champion, which is listed.
The Workchamp is a 6 layers and is also pretty similar to the Champion, but in a 111mm format.
The Vic Handyman and Craftsman are pretty much the same knives as the Champion A and B. Wenger makes a knife called the Handyman as well, but it has only 4 layers and would therefore be unacceptable.
So, what does everyone think? 85mm and up, with 6 or more layers?
-
I spent too much money on Barlows this month, so I'm pretty sure there won't be any new SAKs in time for this challenge.

- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
-
@Alan K. said:
I spent too much money on Barlows this month, so I'm pretty sure there won't be any new SAKs in time for this challenge.From the short time I have had a SwissChamp in my possession, I only can imagine that it could take 30 days of practice to familiarize myself with the toolsets on this model.
And, fo jog worry about the affect of you not buying any items for this challenge, I have your back.
My first a SILVERTech arrived shortly after the 1st of the year. Then stumbled upon a BLACK SC for like half price, then a RED one for even less.
And, without trying I stumbled upon an older SC SilverTech with a sheath, for the price of a sheath alone.
The Sapphire still eluded me, or is it I refuse to look anymore. Yes I have a problem .
[attach id=0 msg=2587886]
See…


-
You can always buy the sapphire scales and change them yourself.

-
@WECSOG said:
So, what does everyone think? 85mm and up, with 6 or more layers?
Well, I don’t really have a dog in this fight since:-
I’m never too worried about badges.
-
I will most likely sit this one out.
But, my $0.02, when the verbiage states “ Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest”, it seems like the models that would count would be:
-
CT-S/CT-29
-
CT-M/CT-34
-
CT-L/CT-41
-
CT Lite
-
Swisschamp
-
Champion
-
Toolchest
-
-
And the XLT and XXL too.
-
@MrToolJunkie said:
And the XLT and XXL too.I thought they have their own challenge.
-
They have their own gravity field

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


