SAK Stack Challenge 2026
-
Do tell....

-
@AzteCypher said:
Do tell....
You'll find out when you find out!

-
I was leaning towards doing the PST in November, but I'm tempted to up it to 60...

-
@BPRoberts said:
I was leaning towards doing the PST in November, but I'm tempted to up it to 60...
Dew eeet!

-
Question for the mods: are any knives not specifically listed eligible for this challenge? For example, the Workchamp or Wenger's Champ?
Perhaps, any SAK with more than 5 layers? Looking at the various SAKs with 6 or more layers, I'm not seeing any that don't look like they would fit with the spirit of this challenge.
-
I am new to this category of SAK. You are hosting!
I was under the impression that 7 and 8 layer models were the intended participants!
There was a challenge earlier this year that included the 11 to 15 layer varients. Hosted by our BPRoberts.
You could further define the length to 91mm models only.
Or, include the WENGER 84 mm 7 and 8 layer models to expand the field.
Is the badge description more definitive?
From the award listing. 30 & 60 days are the same.
Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.
-
@LoopCutter said:
I am new to this category of SAK. You are hosting!I was under the impression that 7 and 8 layer models were the intended participants!
There was a challenge earlier this year that included the 11 to 15 layer varients. Hosted by our BPRoberts.
You could further define the length to 91mm models only.
Or, include the WENGER 84 mm 7 and 8 layer models to expand the field.
Is the badge description more definitive?
From the award listing. 30 & 60 days are the same.
Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest for thirty (30) consecutive days.
I would like to call it any 85mm and up SAK with 6 or more layers. And I will, if nobody has a problem with it. But I wanted to put it out there first for the mods to see, in case any of them don't approve of it.
Wengers such as the Tool Chest are 85mm. The Tool Chest is specifically mentioned in the challenge description; the Wenger Champ is not though it is one more layer than the TC. In fact it is basically the equivalent of the Vic Champion, which is listed.
The Workchamp is a 6 layers and is also pretty similar to the Champion, but in a 111mm format.
The Vic Handyman and Craftsman are pretty much the same knives as the Champion A and B. Wenger makes a knife called the Handyman as well, but it has only 4 layers and would therefore be unacceptable.
So, what does everyone think? 85mm and up, with 6 or more layers?
-
I spent too much money on Barlows this month, so I'm pretty sure there won't be any new SAKs in time for this challenge.

- WECSOG (60)
- IMR4198 (30)
- Barry Rowland (30 tentative)
- AzteCypher (60!!!)
- MTSAK (60)
- Yanossauro
- JonesE (30 tentative)
- Echotech (60)
- nakken (30)
- mathmitch7 (60)
- UscgSal (30)
- LoopCutter (30)
- BPRoberts (30)
- MrToolJunkie (60)
- Alan K. (30 up to 60)
-
@Alan K. said:
I spent too much money on Barlows this month, so I'm pretty sure there won't be any new SAKs in time for this challenge.From the short time I have had a SwissChamp in my possession, I only can imagine that it could take 30 days of practice to familiarize myself with the toolsets on this model.
And, fo jog worry about the affect of you not buying any items for this challenge, I have your back.
My first a SILVERTech arrived shortly after the 1st of the year. Then stumbled upon a BLACK SC for like half price, then a RED one for even less.
And, without trying I stumbled upon an older SC SilverTech with a sheath, for the price of a sheath alone.
The Sapphire still eluded me, or is it I refuse to look anymore. Yes I have a problem .
[attach id=0 msg=2587886]
See…


-
You can always buy the sapphire scales and change them yourself.

-
@WECSOG said:
So, what does everyone think? 85mm and up, with 6 or more layers?
Well, I don’t really have a dog in this fight since:-
I’m never too worried about badges.
-
I will most likely sit this one out.
But, my $0.02, when the verbiage states “ Participate in a challenge thread and post a photo of a SAK Cybertool (any variant), Swisschamp, Champion or Toolchest”, it seems like the models that would count would be:
-
CT-S/CT-29
-
CT-M/CT-34
-
CT-L/CT-41
-
CT Lite
-
Swisschamp
-
Champion
-
Toolchest
-
-
And the XLT and XXL too.
-
@MrToolJunkie said:
And the XLT and XXL too.I thought they have their own challenge.
-
They have their own gravity field

-
I've been reading on previous runs of this challenge, especially the 2020 edition hosted by comis.
/topic/82928
Comis dealt with this exact issue and came up with this:Quote from: zrxoa1 on October 07, 2019, 06:32:15
I can’t remember what model my Wenger is. Does this count? EDIT: I think mine is the Champ, came before the Tool Chest... (Image removed from quote.) Sent from my iPhone using TapatalkZrxoa, I would tend to say yes, but that may invite questions whether Champion/Champion Plus/EvoS54 are eligible too, just to be fair to everyone, could I verify this with Mods before I get back to you?
Zrxoa, just checked, so as long you could help to verify it's a Champ(which has the same tools as ToolChest, just earlier version), I think it's a go.
At the point, I think it is fair to say most variant of Swisschamp, Cybertool and Toolchest are all welcomed, so as long it has same tools or more.
I was told we got a little leeway so as long the layers are compatible, Champ as predecessor has the same layer as Tool Chest, and this puppy got 7 layers too. I would say yes!
Comis mentioned seven layers. But this challenge specifically includes the Champion, and early Champions (A and B versions) had six layers. It wasn't until the C version that it had seven.
Also, SAKwiki breaks down layers as 1,2,3,4,5 and + Apparently in SAKwiki, anything over 5 layers is a biggun.
So unless a mod says otherwise, I'm going with 85mm and up, six layers and up so long as its toolset fits with the intent of the Champion. Even if it's a Wenger Giant; I want to see someone actually carry and use that!
I'm certainly not gonna miss that chance because it doesn't have "Champion" or "Cybertool" in the name. It does need to be a Victorinox or Wenger, though.
And, that does include the Workchamp (six layers) and Workchamp XL (ten layers). In fact I would really like to see someone enter the challenge with a Workchamp XL and help me decide if I really want one or not!
-
I think I like the rules the way they were written in the description. In this month's Barlow challenge, there was a big opportunity to add in almost anything to qualify. Jack knives of various kinds, etc. All that stuff got weeded out to the credit of the host, etc. If 'specification creep' was allowed, then almost anything from a CASE Peanut up would have been a valid substitute. In the first Classic challenge that "What about this one?" and "Why not X?" was quibbled over until the challenge was almost ruined by "What ifs?" The Super Stack types already had their challenge. The 111s have their own challenge coming up. Adding more stuff only waters down the challenge.
Best wishes, G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

