SAK Stack Challenge 2026
-
A miserable but totally legitimate photo of a screwdriver tightening of hundred-year-old screw in a hundred-year-old doorknob at my hundred-year-old farmhouse. The knob was probably painted black at one time.Best wishes, G
[attach id=0 msg=2589624]
If you were to go to Lowes and buy a brand new doorknob to put on a different door in the same house, that 100 year old doorknob would probably still outlast the new one! -
way to go Gordon!@LoopCutter said:
Day 2 Stackem[attach id=0 msg=2589640]
With my first SWISSChamp, I was curious with many doubts. But these words always lingered in the back of my brain, “if the SwissChamp doesn’t have the tool you need, it will help build one!” (Barry R)
So, I gave it a go! Started off the Magnifier and inline Phillips. So much so, the GITD scales destined for a CLIMBER were placed on a EXPLORER. And, those tools saw action regularly.
Then the pliers got a fair shot at winning me over, still a work in progress.
And, the famous FISH SCALER! I doubt I would ever scale a fish with it, as I fillet mostly, yet the ruler gradients for not inches and metric plus the hook degorger are most useful as my imagination has deviated to adapt functions.
Now to look for loose screws needing a tighten!

-
This is the oldest latch in the house, that I'm aware of at least.
.jpg)
-
- "Fishing" for that stone in the tire treads going 'click click '
[attach id=0 msg=2589673] [attach id=0 msg=2589673]

-
Sounds like a good use of the fish scaler, Tony. I never thought of using the thing to pry out pebbles. Best wishes. G

-
That does sound like a good use of the scaler. I usually use the cap lifter/screwdriver.
-
That's the cool thing about the fish scaler. It's least likely to be used for it's intended purpose, but it has a million other uses.
-
Day 2
Man what a day. Nothing going on with knife usage but that's ok. Took my dog to the vet and she's got a bad heart valve, congestive heart valve and an enlarged heart
So lots of meds for the old girl and hopefully get some time with her. She's not in pain, acts fine thankfully. After that went on a 2 hour drive to take the grandbaby to a doc visit. Pic is from us just chilling in the lot.
-
Day 2

Carried and used my Swiss Champ to open a package, containing... another SAK Stack! It was labeled on ebay as an Explorer, I thought it was a Modeler from the photos, and then I found out it was a Champion C when I opened the box! No problem IMO, I didn't have a Champion yet! At least I'm not the only one who was confused.
SwissChamp on the left, Champion right. Champion dates pretty nicely into 1985-86, from the tang stamp and the inclusion of the chisel.
-
thanks @psyjohn
btw does anyone know when Vic went from round micro driver used in the corkscrew to octagonal?
-
Day 2 mini challenge
Installed new pass through door hardware in the sliding doors between my wife’s office and mine. When I installed the doors 18 months ago I used brushed stainless. She didn’t like it from the beginning. Finally got it changed for her. Still need to actually finish the door. We’ll leave that for another day.

-
@JonesE said:
Day 2 mini challengeInstalled new pass through door hardware in the sliding doors between my wife’s office and mine. When I installed the doors 18 months ago I used brushed stainless. She didn’t like it from the beginning. Finally got it changed for her. Still need to actually finish the door. We’ll leave that for another day.

@mathmitch7 said:
Day 2
Carried and used my Swiss Champ to open a package, containing... another SAK Stack! It was labeled on ebay as an Explorer, I thought it was a Modeler from the photos, and then I found out it was a Champion C when I opened the box! No problem IMO, I didn't have a Champion yet! At least I'm not the only one who was confused.
SwissChamp on the left, Champion right. Champion dates pretty nicely into 1985-86, from the tang stamp and the inclusion of the chisel.
Nice Champion! My Champion C doesn't have the chisel, so it must be pre-'85. It's in really good condition, though. Scales are really shiny, no scratches on any tools, etc. I might have to get to work fixing that!
-
Btw I was looking at my Swisstool a little while ago, and it occurred to me that multitools offer little more than bigger pliers over most of these larger SAKs. I have several multitools of various brands, but I would rather carry my small Visegrips and a Workchamp, Swisschamp, Champion or similar, than any multitool I know of.
-
- Early cause my pants keep falling down!
[attach id=0 msg=2589701]

-
@LoopCutter said:
Day 2 Stackem[attach id=0 msg=2589640]
With my first SWISSChamp, I was curious with many doubts. But these words always lingered in the back of my brain, “if the SwissChamp doesn’t have the tool you need, it will help build one!” (Barry R)

What a brilliant way to put it, wise words indeed

-
Day 2
Scissors to the rescue cutting a tag off a new backpack.

-
Day 2
Toothpick for... yeah.
[attach id=0 msg=2589708]
TOOL USAGE:
Large blade
Small blade
Metal-saw
with file
and cleaner
Wood-saw
<u>Fish-scaler: Unstopping glue</u>
with ruler
and hook remover
Scissors
Cap-lifter
with screwdriver
and wire stripper
Can-opener
with screwdriver
Inline Phillips screwdriver
Magnifying glass
Wood chisel
Reamer/Awl
with sewing-eye
Fine screwdriver
Mini screwdriver
Multipurpose hook
Corkscrew
Keyring
<u>Tweezers: Unstopping glue
Toothpick: Yep</u>
Pen
Straight Pin
-
Day 3 - mini challenge
Moved around some gear in the studio with the Matterhorn inline philips, worked well


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

