SAK Stack Challenge 2026
-
That's the cool thing about the fish scaler. It's least likely to be used for it's intended purpose, but it has a million other uses.
-
Day 2
Man what a day. Nothing going on with knife usage but that's ok. Took my dog to the vet and she's got a bad heart valve, congestive heart valve and an enlarged heart
So lots of meds for the old girl and hopefully get some time with her. She's not in pain, acts fine thankfully. After that went on a 2 hour drive to take the grandbaby to a doc visit. Pic is from us just chilling in the lot.
-
Day 2

Carried and used my Swiss Champ to open a package, containing... another SAK Stack! It was labeled on ebay as an Explorer, I thought it was a Modeler from the photos, and then I found out it was a Champion C when I opened the box! No problem IMO, I didn't have a Champion yet! At least I'm not the only one who was confused.
SwissChamp on the left, Champion right. Champion dates pretty nicely into 1985-86, from the tang stamp and the inclusion of the chisel.
-
thanks @psyjohn
btw does anyone know when Vic went from round micro driver used in the corkscrew to octagonal?
-
Day 2 mini challenge
Installed new pass through door hardware in the sliding doors between my wife’s office and mine. When I installed the doors 18 months ago I used brushed stainless. She didn’t like it from the beginning. Finally got it changed for her. Still need to actually finish the door. We’ll leave that for another day.

-
@JonesE said:
Day 2 mini challengeInstalled new pass through door hardware in the sliding doors between my wife’s office and mine. When I installed the doors 18 months ago I used brushed stainless. She didn’t like it from the beginning. Finally got it changed for her. Still need to actually finish the door. We’ll leave that for another day.

@mathmitch7 said:
Day 2
Carried and used my Swiss Champ to open a package, containing... another SAK Stack! It was labeled on ebay as an Explorer, I thought it was a Modeler from the photos, and then I found out it was a Champion C when I opened the box! No problem IMO, I didn't have a Champion yet! At least I'm not the only one who was confused.
SwissChamp on the left, Champion right. Champion dates pretty nicely into 1985-86, from the tang stamp and the inclusion of the chisel.
Nice Champion! My Champion C doesn't have the chisel, so it must be pre-'85. It's in really good condition, though. Scales are really shiny, no scratches on any tools, etc. I might have to get to work fixing that!
-
Btw I was looking at my Swisstool a little while ago, and it occurred to me that multitools offer little more than bigger pliers over most of these larger SAKs. I have several multitools of various brands, but I would rather carry my small Visegrips and a Workchamp, Swisschamp, Champion or similar, than any multitool I know of.
-
- Early cause my pants keep falling down!
[attach id=0 msg=2589701]

-
@LoopCutter said:
Day 2 Stackem[attach id=0 msg=2589640]
With my first SWISSChamp, I was curious with many doubts. But these words always lingered in the back of my brain, “if the SwissChamp doesn’t have the tool you need, it will help build one!” (Barry R)

What a brilliant way to put it, wise words indeed

-
Day 2
Scissors to the rescue cutting a tag off a new backpack.

-
Day 2
Toothpick for... yeah.
[attach id=0 msg=2589708]
TOOL USAGE:
Large blade
Small blade
Metal-saw
with file
and cleaner
Wood-saw
<u>Fish-scaler: Unstopping glue</u>
with ruler
and hook remover
Scissors
Cap-lifter
with screwdriver
and wire stripper
Can-opener
with screwdriver
Inline Phillips screwdriver
Magnifying glass
Wood chisel
Reamer/Awl
with sewing-eye
Fine screwdriver
Mini screwdriver
Multipurpose hook
Corkscrew
Keyring
<u>Tweezers: Unstopping glue
Toothpick: Yep</u>
Pen
Straight Pin
-
Day 3 - mini challenge
Moved around some gear in the studio with the Matterhorn inline philips, worked well


-
Day 3
I bought the Handyman when I still went out fishing a lot. I found both the Fisherman and the Angler lacking, as neither had both scissors and pliers. At the time, I didn't know about the Deluxe Tinker.
So one day I went fishing and to my surprise I found a SAK among the reeds. It was in a very bad condition, but the front scale had survived, and what's more, it had the metal inlaid cross-and-shield and the fish. That same day I put it on my Handyman. I don't know when Victorinox stopped using the metal inlays but I guess maybe the scale is much older than the SAK it's now on.

-
Very nice Ron, can’t beat those inlaid scales

-
@LoopCutter said:
Doesn’t it rain almost every day in Florida in summer and fall?I was curious if you were nearer to my 10/20!

It rains frequently in the summer, but Sept/Oct are always very wet, and often very windy ;). We had 4-5" the other night, causing flooding in our neighborhood. The worst I recall not during a hurricane was 8-10" locally three days before Thanksgiving. :ahhh
-
Day 3
Hard to take a photo with the teeny magnifying glass. You can use this thing to check a date on something that is hard to read or zero in on something small once you tip it back and forth and up and down. Sometimes. Not so great for stink bug photos. These things are quickly filling up any building here on Werecoyote Trail. They come in regiments and are airborne. Hard to kill. Expert infiltrators. Camouflaged. Body armor. Equipped with chemical weapons. I keep evicting these things every day by catching them in a stink trap (empty pop tart box). Marmorated stink bugs. You can take a photo of them when they are on the other side of a screen. If camera and bug are on the same side, they turn loose and drop to the floor or fly away. Smart. I am going to start making a list of used tools on my SC. Something like what friend BP did, except less labor intensive.Best wishes. G
:D
[attach id=0 msg=2589717]
-
Day 3
So don't want to go to work this morning. My body is not having it and I need a day to just sleep. But duty calls, transitioned to spooky season and headed to a close store and work a little bit today. I really like the Cybertool I've got but think I want to get the smaller one that ditched the pliers and scissors. Thickness on the 34 isn't too bad but something a little lighter with that full size driver would be cool

-
Day 3
Had to move the fan to the storage room, and it had a nice handle to carry it with the hook
[attach id=0 msg=2589720]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

