SAK Stack Challenge 2026
-
Day 3
Hard to take a photo with the teeny magnifying glass. You can use this thing to check a date on something that is hard to read or zero in on something small once you tip it back and forth and up and down. Sometimes. Not so great for stink bug photos. These things are quickly filling up any building here on Werecoyote Trail. They come in regiments and are airborne. Hard to kill. Expert infiltrators. Camouflaged. Body armor. Equipped with chemical weapons. I keep evicting these things every day by catching them in a stink trap (empty pop tart box). Marmorated stink bugs. You can take a photo of them when they are on the other side of a screen. If camera and bug are on the same side, they turn loose and drop to the floor or fly away. Smart. I am going to start making a list of used tools on my SC. Something like what friend BP did, except less labor intensive.Best wishes. G
:D
[attach id=0 msg=2589717]
-
Day 3
So don't want to go to work this morning. My body is not having it and I need a day to just sleep. But duty calls, transitioned to spooky season and headed to a close store and work a little bit today. I really like the Cybertool I've got but think I want to get the smaller one that ditched the pliers and scissors. Thickness on the 34 isn't too bad but something a little lighter with that full size driver would be cool

-
Day 3
Had to move the fan to the storage room, and it had a nice handle to carry it with the hook
[attach id=0 msg=2589720]

-
<u>DAY 3</u>
What makes the Handyman so handy? It's a Ranger (my favorite SAK) with pliers!
Yeah, yeah. they're not Surge pliers, but they do come in handy. 

-
@Ron Who said:
Day 3I bought the Handyman when I still went out fishing a lot. I found both the Fisherman and the Angler lacking, as neither had both scissors and pliers. At the time, I didn't know about the Deluxe Tinker.
So one day I went fishing and to my surprise I found a SAK among the reeds. It was in a very bad condition, but the front scale had survived, and what's more, it had the metal inlaid cross-and-shield and the fish. That same day I put it on my Handyman. I don't know when Victorinox stopped using the metal inlays but I guess maybe the scale is much older than the SAK it's now on.
My old Super Tinker had the metal inlay, but after years of pocket carry the scales wore down until the inlay fell off and disappeared.
Day 3
Used the Champion C to open a package containing another contender: a brand new Cybertool L!

-
Day 3
Yesterday morning I added a SUSPENSION clip to the CRAFTSMAN ( a HANDYMAN with backside Phillips)
And, last night it occurred to me I really should go AWL IN during this challenge. So, this morning I snatched up my crossbody bag and exchanged the SPIRIT MXBS and replaced it with the CRAFTSMAN. I will have pliers yet, and pretty much every thing else. Plus I will leave the COMPACT dangling, because it provides a CORKSCREW!
[attach id=0 msg=2589727]

-
David, I'm really sorry to hear that.
Man what a day. Nothing going on with knife usage but that's ok. Took my dog to the vet and she's got a bad heart valve, congestive heart valve and an enlarged heart
So lots of meds for the old girl and hopefully get some time with her. She's not in pain, acts fine thankfully. After that went on a 2 hour drive to take the grandbaby to a doc visit. Pic is from us just chilling in the lot. -
I actually used the scaler one time fishing. I wrapped the body of the knife in a plastic bag and extended the scaler. The hook remover works pretty well, and the scaler gets the job done, but I'd much rather use it as a ruler!
Day 3: Cutting open a bag of fresh coffee with the blade.

-
Day 3
I used CT34 to repair our Kenwood mixer.
It’s about 10 years old and generally trouble free and useful appliance which we use regularly.
But about 4 years ago it suddenly stopped working. I took it to repair shop, they repaired it but it took about a month and cost 75eur. They gave me the faulty part which looked like a little pressure switch. All worked fine again till Tuesday this week - it stopped working again. I remembered the issue so I did some online research and learned that the faulty part was a safety switch that prevents the mixer to run when the head is open. I decided to check whether the issue is the same as previously and see whether I could repair it it by myself.
So the CT34 with the torx bit opened the bottom cover. After some searching (and cursing - it was rather tight space) I was able to locate the switch and removed it from plastic pins on which it sits. And voilà - the plastic body of the switch consist from two parts which were unclicked from each other. I just clicked it together and it worked again! I reinforced it with small piece of duct tape into which I made a hole with awl so it can be put on the pins again. Now it works again!
[attach id=0 msg=2589736]
[attach id=1 msg=2589736]
[attach id=2 msg=2589736]
[attach id=3 msg=2589736]



-
Week 1 Mini Challenge

I decided to try to repair this outlet that's been broken for years. Of course, I had forgotten I already tried to fix it a few years back; it's some kind of issue with the wiring beyond the receptacle. Ah well, I used the screwdrivers, flathead (on the cap lifter) and Phillips (inline).
-
Day 3
Used the mini screwdriver to loosen the temples on my new glasses. The screws were so tight that the nose bridge would bend whenever I opened or closed the temples to put my glasses on or away.
[attach id=0 msg=2589741]
ETA "Day 3"

-
Day 3 bonus, mini challenge
Today I noticed to frequently used kitchen drawer pulls were beyond loose. Actually the utensil drawer pull fell into my hand.
The CHAMPION was assigned duty.
[attach id=0 msg=2589742]And, the half-stop came in handy so I did not need to empty the drawer.
Silverware drawer was checked and its pull was secure. But, across the kitchen my utility drawer pull freely turned.
[attach id=1 msg=2589742]This time, Phillips as an inline driver worked best.
This time, because of the half-stop feature, this single tool worked very well in both configurations.
I also, inspected outlet covers, but decided, new screws are required, as paint has fallen away on many. Estimate a bag of 50 ivory screws should be sufficient😉


-
Everyone. Make sure you number your post for each day. I forget to do it all the time and have to go back. At least I used to. Best wishes. G
:ahhh -
Bay 3 Mini Challenge Bonus
Used the flat driver to replace a broken outlet plate today.

-
I was taught by an electrician many many years ago, that to always align the screw head slot, N/S on switch plate covers and outlet covers.
| = North/South
Never leave the screw head slot in any over position.
Nope \ , /, —. Never.
If tight, then back it off till |, straight up & down.
-
North/South got it. Thanks LC!

JonesE
-
Day 3

Today Champy the SwissChamp accompanied me to an artist talk at a sculpture park, about this sculpture of a giant sturgeon. I made this salt-water etching of the New York City area on a card of stainless steel afterwards, using the scissors on the knife to cut electrical tape.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
