Multi Purpose Wrench
-
This design is extremely close to the tool I wished the Guppie had been.
All I want is a small, light 1/2" - 3/4" adjustable wrench with a Cybertool style bit driver. Nothing else. That would be heaven to me.
This tool is close, but much bulkier than it needs to be.
For one, I would lose the knife. Every tool does not need a knife blade and most people who would buy this will likely already have one or more with them.
Secondly, I would also discard the bit holder layer, which adds unnecessary metal bulk and width to the tool.
A better solution would be to store just 3 or 4 bits under the driver as done in the CyberTool. It doesn't really matter how it is done though. There are many options for tucking in a few bits without requiring an entire layer. Any other bits would be better stored in a sheath.
With the above changes, the tool would be much, much thinner and the handles wouldn't have to be so deep.
I am not sure I understand what they are doing with the wrench head. It doesn't look like it is supposed to fold, and it also does not look very sturdy.
Anyway, if you trimmed this thing way down to just a wrench with a flip out bit driver in the handle, you would have a perfect compliment to any standard plier-based MT. It could likely even be squeezed into the same sheath as many MTs. I already do that with a regular adjustable wrench.
Here is a less practical idea I had been toying with: I have a Stanley 10" locking adjustable wrench. Basically, it is a crescent wrench with a vise grip locking mechanism. You can just use it like a regular adjustable wrench, but you can also lock it down like a vise grip if you need to.
I was thinking that would be a great feature for an MT. It wouldn't equal a Crunch as a vise grip, but it would give you a bit of that versatility.
I am ambivalent about the idea though. In practice, the adjustable wrench on my Stanley works so well that I very rarely use the locking mechanism anyway. It did come in handy with some rusty bolts once though.
So when can I buy this thing? :D
-
If the quality was good, I'd certainly be tempted :)
-
I like it,hope somebody with quality in mind makes it.

-
What I'd like to see is a precision made worm gear on the wrenches, all the ones I've seen has slop there.
-
I think it's great. I would want to replace the knife with something else too. Wish someone would make a ratchet that does more than just ratchet too.
-
@Slashmaster said:
I think it's great. I would want to replace the knife with something else too. Wish someone would make a ratchet that does more than just ratchet too.The Ratchet Rocket is a slick little piece of kit. Not a ratchet-multitool per se, but a compact bike tool nonetheless. :)

-
@WhichDawg said:
I like it! and you like it but I don't think the general public would know what it is
let alone how to use it
I think a plier based MT was the limit of general publics usage and a large percentage
of the "buying" public knowing "how" to use it, let alone what it is.We're in a generation(s) of mechanical "huh?" uncle Bob, I think and it's just not
worth the research and development costs for the big boys, I'm sorry to say.The average person would rather buy a few dedicated "cheapies" from wally-world
then pay premium dollar for a good tool, dedicated or multi.I find it very interesting you say this. I'm wondering just what it is that made you say this? Do you know of a lot of other non pliers based multi-tools that were manufactured and didn't sell well?
-
We're in a generation(s) of mechanical "huh?" uncle Bob, I think and it's just not
worth the research and development costs for the big boys, I'm sorry to say.Are you kidding?
I would hazard to say that there are more mechanically inclined people than at any other point in history. For the simple reason that people have a lot of free time and a good amount of money. Combine this with cheap access to tools and information and you have an explosion of mechanically inclined people. Take just a short tour of the dozens/hundreds of D-I-Y websites, magazines and videos out there. People may not be doing jobs that are as mechanically inclined as they once were but they tinkering away in garages, workshops and labs across the county. Working on homebrew projects that range from the quick and simple to the monstrously complex.
I think you're actually falling into a similar phenomenon as a lot of people when they see something they don't like. It often sticks in their mind and is re-enforced every time they see something similar, making them feel it is commonplace when it's actually just you personal bias and memory re-enforcing the ideas you hold.
Journalism has an expression for this phenomenon: http://en.wikipedia.org/wiki/Man_bites_dog_(journalism)
Example, if someone cannot fix something they request help from others but if someone is able to fix it themselves they need no help and no "report" of being "helpless" is ever made. The squeaky wheel will get the oil and the helpless man will get noticed while the competent gentleman often does not.

-
@Slashmaster said:
I find it very interesting you say this. I'm wondering just what it is that made you say this?
Do you know of a lot of other non pliers based multi-tools that were manufactured and didn't sell well?One recent example is the Sog/Cutter in Bobs (J-sews) avatar and thread.
They were developing it for awhile and stopped. I remember a Kershaw MT that was pretty cool
that is no longer available. We have discussed a few here :)Of course I don't know the real reasons and it's just my opinion but discussion and debate could open
some eyes and maybe even help a few good companies reconsider! I do know I have not seen
many non-plier based MTs in the market (in the past) and on workers tool belts (I worked the trade show
industry for 16 years and with thousands of tradesmen) of course their were exceptions, but very few trusted or cared for
non-plier based MTs, and with regular/non-trade consumers such tools are even less important.We are the tool-a-holics here, we love them all and want them all! but we are the few, the proud, the minority.
I am seeing more MTs of all kinds lately, whether they make it or not is to be seen, both Quality and cheap Chinese.
Maybe with the economy more people will want and try multitools of all kinds, I can only hope ;) -
I would be tempted by that tool Bob. I have issues when using pliers or vise grips as a wrench ::) :D :D. I have a Guppie but I find the ergonomics are not so flash. I also bought a cheap Mammut MT wrench , although solid enough the amount of play in the wrench adjusting mechanism is just awful. I would like to give a Byrdrench a go. I do like the concept pictures 8) 8)
-
We're in a generation(s) of mechanical "huh?" uncle Bob, I think and it's just not
worth the research and development costs for the big boys, I'm sorry to say.
Are you kidding?
I would hazard to say that there are more mechanically inclined people than at any other point in history. For the simple reason that people have a lot of free time and a good amount of money. Combine this with cheap access to tools and information and you have an explosion of mechanically inclined people. Take just a short tour of the dozens/hundreds of D-I-Y websites, magazines and videos out there. People may not be doing jobs that are as mechanically inclined as they once were but they tinkering away in garages, workshops and labs across the county. Working on homebrew projects that range from the quick and simple to the monstrously complex.
I think you're actually falling into a similar phenomenon as a lot of people when they see something they don't like. It often sticks in their mind and is re-enforced every time they see something similar, making them feel it is commonplace when it's actually just you personal bias and memory re-enforcing the ideas you hold.
Journalism has an expression for this phenomenon: http://en.wikipedia.org/wiki/Man_bites_dog_(journalism)
Example, if someone cannot fix something they request help from others but if someone is able to fix it themselves they need no help and no "report" of being "helpless" is ever made. The squeaky wheel will get the oil and the helpless man will get noticed while the competent gentleman often does not.

WD, Spoony, I think you guys are BOTH right. While there are indeed lots of mechanically inclined people (like us!) in the world today, I still can't help but feel we are in the minority. :( And why are we in the minority? I believe it has to do with the way things are built these days. Because so few things are user-servicable any more, many people don't tend to acquire the mechanical talents that they perhaps would have in the past. Instead of fixing the broken part when the car breaks down, the entire "module" is now replaced. Broken kitchen appliance? Throw it out and buy a new one. Same thing for kids toys, electronics, etc. Most people don't get or don't choose to take the opportunity to fix things themselves and develope their mechanical abilities.
Take the Multi Purpose Wrench in this thread for instance. Yah, it looks pretty damn cool and all. But think about it; as an EDC item, how often would any of us ever actually use the adjustable wrench? How many items in our everyday lives have protruding hex nuts that need to be loosened/tightened? The only thing that comes to mind is my bicycle. Nothing else I interact with is built with protruding bolts.
Unfortunately, a multitool manufacturer needs to consider this limited market before starting expensive developement of a new tool. :-\
-
good points Bob! I used hex bolts alot a work, but your right, not much left at home.
(I still want it)I think about all the kids growing up, the generations who don't have a SAK or
any type of basic tool on them, countries where such things are outlawed, even
the boy-scouts! a basic tool that taught us to be responsible and be able to fix so much.I know more "techno-wizards" (as Mike would say) then handy men now :ahhh
-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
-
I would love one of these
-
Looks like a MUCH nicer version of the Husky 11-in-1 wrench.
-
@DoughDTD said:
That is pretty cool looking, a bit clunky thoFunny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
-
@J-sews said:
Just a set of concept drawings I found on the web, but it does look pretty cool: :)Link: http://www.behance.net/Gallery/Multitool/131283





It would be neat if a quality manufacturer like Leatherman would bring out a tool like this. Lord knows there are enough junky Chinese versions out there already. ::) Even if CRKT expanded their Guppie line to include a wrench tool with a little more torque it would be nice. :)
I had a dream that leatherman came out with a wrench in the juice line. I dreamt it months ago but nothing has happened
-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login