Multi Purpose Wrench
-
We're in a generation(s) of mechanical "huh?" uncle Bob, I think and it's just not
worth the research and development costs for the big boys, I'm sorry to say.
Are you kidding?
I would hazard to say that there are more mechanically inclined people than at any other point in history. For the simple reason that people have a lot of free time and a good amount of money. Combine this with cheap access to tools and information and you have an explosion of mechanically inclined people. Take just a short tour of the dozens/hundreds of D-I-Y websites, magazines and videos out there. People may not be doing jobs that are as mechanically inclined as they once were but they tinkering away in garages, workshops and labs across the county. Working on homebrew projects that range from the quick and simple to the monstrously complex.
I think you're actually falling into a similar phenomenon as a lot of people when they see something they don't like. It often sticks in their mind and is re-enforced every time they see something similar, making them feel it is commonplace when it's actually just you personal bias and memory re-enforcing the ideas you hold.
Journalism has an expression for this phenomenon: http://en.wikipedia.org/wiki/Man_bites_dog_(journalism)
Example, if someone cannot fix something they request help from others but if someone is able to fix it themselves they need no help and no "report" of being "helpless" is ever made. The squeaky wheel will get the oil and the helpless man will get noticed while the competent gentleman often does not.

WD, Spoony, I think you guys are BOTH right. While there are indeed lots of mechanically inclined people (like us!) in the world today, I still can't help but feel we are in the minority. :( And why are we in the minority? I believe it has to do with the way things are built these days. Because so few things are user-servicable any more, many people don't tend to acquire the mechanical talents that they perhaps would have in the past. Instead of fixing the broken part when the car breaks down, the entire "module" is now replaced. Broken kitchen appliance? Throw it out and buy a new one. Same thing for kids toys, electronics, etc. Most people don't get or don't choose to take the opportunity to fix things themselves and develope their mechanical abilities.
Take the Multi Purpose Wrench in this thread for instance. Yah, it looks pretty damn cool and all. But think about it; as an EDC item, how often would any of us ever actually use the adjustable wrench? How many items in our everyday lives have protruding hex nuts that need to be loosened/tightened? The only thing that comes to mind is my bicycle. Nothing else I interact with is built with protruding bolts.
Unfortunately, a multitool manufacturer needs to consider this limited market before starting expensive developement of a new tool. :-\
-
good points Bob! I used hex bolts alot a work, but your right, not much left at home.
(I still want it)I think about all the kids growing up, the generations who don't have a SAK or
any type of basic tool on them, countries where such things are outlawed, even
the boy-scouts! a basic tool that taught us to be responsible and be able to fix so much.I know more "techno-wizards" (as Mike would say) then handy men now :ahhh
-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
-
I would love one of these
-
Looks like a MUCH nicer version of the Husky 11-in-1 wrench.
-
@DoughDTD said:
That is pretty cool looking, a bit clunky thoFunny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
-
@J-sews said:
Just a set of concept drawings I found on the web, but it does look pretty cool: :)Link: http://www.behance.net/Gallery/Multitool/131283





It would be neat if a quality manufacturer like Leatherman would bring out a tool like this. Lord knows there are enough junky Chinese versions out there already. ::) Even if CRKT expanded their Guppie line to include a wrench tool with a little more torque it would be nice. :)
I had a dream that leatherman came out with a wrench in the juice line. I dreamt it months ago but nothing has happened
-
-
-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
The crony is taking alot longer than expected, especially since i still havent gotten a job after graduating and have no start up capital yet >:(
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
The crony is taking alot longer than expected, especially since i still havent gotten a job after graduating and have no start up capital yet >:(
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
Well, when the Crony is up and ready for purchase, you'd better let us know, because you know you have customers here wanting it.

-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
The crony is taking alot longer than expected, especially since i still havent gotten a job after graduating and have no start up capital yet >:(
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
Any chance of a sketch or are you keeping close to your chest for now?
-
@DoughDTD said:
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
Sounds amazing, Dough! I wished for almost exactly what you described in my post near the top of this thread, so put me down for one!

I agree 100% with not having bit storage on the tool itself. LM bits would be great!
One thing I really liked about the design of this wrench was the CyberTool-style extender. Were you planning on having some type of built-in extender on your tool as well?
Will it be very hard to make a decent gear system for the wrench?
-
its going to accept standard 1/4" hex bits, but also be able to use the double sided flat bits...sorry if i was unclear on that.
i plan to include a bit extender with it, ala spirit ratchet or leatherman bit extender, that would essentially do the same thing.
-Dough
-
Get yer finger out Dough - I want my Crony (can't afford an Atwood :D)
-
Good things come to those who wait

I really want to get my company off the ground, and you guys who have supported the process and put up with these lengthy delays will get rewarded by having a specially marked "first run" edition of the crony if you choose to buy one. Hell, maybe itll be worth something someday(besides its weight in gold as an awesome tool! ::))

-Dough
-
@DoughDTD said:
Good things come to those who wait
I really want to get my company off the ground, and you guys who have supported the process and put up with these lengthy delays will get rewarded by having a specially marked "first run" edition of the crony if you choose to buy one. Hell, maybe itll be worth something someday(besides its weight in gold as an awesome tool! ::))

-Dough
Rather than wait though, we spend our money on other good things... then when your good thing comes around ,we won't be able to buy it! :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login