PowerPint Overview Mighty Little MT
-
Thanks Mags, I have often thought of dropping in other implements in place of the stock ones. One of the things holding me back has been the plier jaws when folded closed. Every implement has to fit a certain way to clear the jaw. The other thing is once you got the new tool fitted and everything clears, how do you access it? Essentially, where do you place the nail nick.

JonesE
-
@JonesE said:
Thanks Mags, I have often thought of dropping in other implements in place of the stock ones. One of the things holding me back has been the plier jaws when folded closed. Every implement has to fit a certain way to clear the jaw. The other thing is once you got the new tool fitted and everything clears, how do you access it? Essentially, where do you place the nail nick.
JonesE
Yes, I see what you're saying - it's a very precise setup isn't it.
I quite like that the nail nick problem is solved with the protruding tab of the Gerber driver. It works for me even though it disrupts the silhouette somewhat.What tools would you like to replace and what would you replace then with?
-
The four implements I would change for better ones are: 1. The awl, I want it a little longer and the fact that they cut a portion away at the tip bothers me. 2. The scissors, Mine never could really cut anything. They would jam up if you cut parachord. This one deserves a good rethink. 3. The can opener, the edge needs to be sharpened to actually cut into a can and the little nub should be ground straight and skinnied down to actually be usable as a small flat driver. 4. The bottle opener, the end should be squared off so you can actually use it as a large flat driver.
The last two, a user could simply mod themselves. The first two would take some figuring out.
I really like the tool and they go a lot right with it. For the average user, if they fixed the scissors it would be a home run.
JonesE
-
My needs in a MT are: pliers, 1/4" flat driver, #2 Phillips, knife, scissors.
The PowerPint comes up short on the two drivers. So I ground the end of the file for the flat driver.
Still missing the #2 Phillips.
I removed the can opener, bottle opener, and the little eyeglass driver.
I took a 2 inch #2 Phillips 1/4 hex bit, softened the steel with a propane torch so I could drill a hole in it.
It sticks out of the side a little, that could be fixed by shortening it a little.

-
-
Received today my first SOG and its PowerPint, its much smaller than i tought but still neat little tool.
There are few things that noticed while playing with it like can opener doesnt have flathead like usually like other brands does, that you need to open pliers to release tool from lock and like others have said that scissors arent best but overall its cool to own.
I will try to carry this tool someday to see how good it is[attach id=0 msg=2592345]

-
@Antti Lammi said:
Received today my first SOG and its PowerPint, its much smaller than i tought but still neat little tool.
There are few things that noticed while playing with it like can opener doesnt have flathead like usually like other brands does, that you need to open pliers to release tool from lock and like others have said that scissors arent best but overall its cool to own.
I will try to carry this tool someday to see how good it is[attach id=0 msg=2592345]
Nice choice.
I really like mine, too seems that in this day and age companies could figure out how to make a simple pair of scissors work. -
-
Cool. Stick with it Antti - it's very capable for its size -I really enjoyed mine and I think Kirky is enjoying it now
-
Today carried PowerPint at work and gotta say hook cutter cuts zipties like champ
[attach id=0 msg=2592406]

-
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login