SAK Stack Challenge 2026
-
Day 30
I don't know if a lanyard fob and a home-made suspension clip count as mods or not. I purchased this Swiss Champ about 2 years ago from a pawmshop for $12. The tool was in very rough shape. It looked like it had lived in a fishing tacklebox for an extended period of time. Oxidized liners and rusted tools were nearly inoperable. Oil, some fine abrasives, some elbow-grease and some compressed-air yielded a fine tool with good snap and smooth action. I enjoy using the Swiss Champ, and it rides fairly unobtruseively in my left front pocket by the suspension clip. This was my first challenge here on MTO and it has been fun! Thanks to @IMR4198, Gary, for the pointers and encouragement! Thanks to @WECSOG for hosting this ongoing challenge! Thanks to the fine mods who volunteer so much time! Thanks to @ Mr. Grant Lamontagne for such a great forum! Thanks to Victorinox for such fine iconic knives and tools, and thanks to everyone for your kind comments and participation!
[attach id=0 msg=2592525]
-
The colors are quite vivid. The phone camera doesn't show them the way they really are. Temps are mid 70-ish today and clear skies. Perfect time for the too-tight Opinel test.
I placed two wood handled No. 8s on the truck dash. Slot sides turned up. That was just before 11AM. I went back at 3PM to check on them. The metal parts were too hot to touch. Just like a metal seat belt part or steering wheel would be during a warm day in the full sun. One hornbeam and one beech. One clear varnish finish and one painted blue Colorama.
Now both can be opened more easily than when they were new. Not a permanent fix, naturally. Humidity, etc. They wouldn't flop open, but I could easily open either by pinching the blade. Using the nail nick wasn't even necessary. Blades swung all the way open. One unexpected result. The lock rings were completely loose. The wood swelled up enough to grip the blades, but it also had expanded outward enough to make the locking rings tight as well. Complete cure. Four hours was plenty.
Finish of the knives was completely unaffected. Rings and blades cooled to the touch in 10-15 minutes inside a rather cool house and both Opinels are loose as a goose. Definitely try it if your knife blades or rings are difficult to manipulate. Naturally the heat generated inside a closed vehicle wouldn't have any effect on the blades. Best wishes. G

-
Day 30 and Mini-Challenge 5


Showing off my recent customizations.
- I mailed this scale-swapped Explorer (now, "Explorer Plus"!) to a friend today, along with backup toothpick and tweezers (in black, in case she likes the color better than stock).
- I also recently added a black toothpick and tweezers to this One-Handed Trekker, which looks very striking.
- Now that I think of it, I also recently added this little red lanyard to the Swiss Champ's keyring! I thought about swapping its T&T to red as well, but ultimately decided I liked the look of the stock T&T better.
Great mini-challenge! I'm now 50% through the 60-day SAK Stack Challenge!! Congrats to all who are finishing today :)
-
nice modsLike last challenge- I cant seem to access the icon to request the badge? Screen is landscape but still off screen ?
Any help appreciatedNever mind? Got it!!
-
Day 28
Tried to post yesterday, but got an error. Planning to use today to finish catching up to 30, and then reset for another badge (but still with a STACK-compatible knife) so I can stay in the thread with awl you fine people.
Took apart an old phone at work. Trying to get the ringer/bell off. The screw is stripped and I didn't use the metal saw yet, so...
The metal saw sucks. We already knew that.

-
Day 30
Site was down yesterday, so this is the post for day 30.

-
Day 30
I don’t have a modded Vic, but the Champion I carried for the challenge I did do quite a bit of work on. The aluminum liners had dings and light oxidation on them. I sanded out as much of the imperfections in the liners as I could. I also sanded the scratches and polished out the scales. Knife is all original, just cleaned up and ready to go for the next two decades of service.

-
That's a good idea on the opinels Gary. Never considered heating it up on the dash. Probably safer than by a space heater.
I thought for sure the site had transitioned last night as I couldn't get into MTO. I couldn't get my fix...... :o
<u>Day 29 - ketchup</u>
Used the mini-screwdriver to push down on the refill port of this leather so I can get the reminder of the old stuff out. It was pretty handy using it with the corkscrew as an extension.

-
<u>Day 30</u>
Mini-challenge
I've done a few scale swaps, which is the only mods I've done to a Vic SAK so far, but I'm pretty happy with this one. These are 3D printed scales I put on my Ranger that have held up pretty well for the last 2yrs. I don't daily it everyday but it does go into the rotation. I'm going to try and print some other ones with a finer nozzle to see how much I can improve the quality.
Oh and that's my pretty Silvertech Swisschamp.

-
Day 31
Bonus. Work Champ helping replace the inlet valve on the dishwasher. Dishwasher sounded funny and I realized it was cycling dry due to a faulty inlet valve.
[attach id=0 msg=2592586]

-
@AzteCypher said:
That's a good idea on the opinels Gary. Never considered heating it up on the dash. Probably safer than by a space heater.<u>Day 29 - ketchup</u>

I have to say the dash trick is still working a day later. Blades and locking rings are free as can be. Safe. Didn't cost a dime. Completely satisfactory fix. The Opies before were real nail pullers to get the blades started up and then took a strong grip on the blade to mostly pull them all the way up. They never actually reached the full open position. Lacked a fraction, but the locking rings would engage. Closed in fits and jerks as they grabbed all the way closed. I was completely burned out with Opinels before the dash experiment. I carried an Opi all day today. Still just as smooth as can be. Eventually, I'm sure they will tighten up again. Very damp here. However, I do know the key to fixing the problem now. Best wishes. G
-
I don't know who gave me the badge, but thanks!

-
Day 30 + 1
Completed 30 day portion.
Today last day traveling in Netherlands today, flight is Dunday morning. Do SC is now packed in checked bag.
So final picture from Europe
[attach id=0 msg=2592597]
-
Day 31
Mod mini challenge - I’ve only done a couple of scale swaps, emerald for the compact and Ti for the climber

-
Day 32
Mail duty

-
Day 31

Happy Halloween, everyone!
-
Day 30
Swiss Champ and Breast Cancer Awareness Classic because it is breast cancer awareness month.

-
Day 31
Used the small blade of the CT-41 to sharpen a pencil. Congratulations to those who have completed the 30-day challenge and good luck to those going on with the 60-day challenge.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
