SAK Stack Challenge 2026
-
nice modsLike last challenge- I cant seem to access the icon to request the badge? Screen is landscape but still off screen ?
Any help appreciatedNever mind? Got it!!
-
Day 28
Tried to post yesterday, but got an error. Planning to use today to finish catching up to 30, and then reset for another badge (but still with a STACK-compatible knife) so I can stay in the thread with awl you fine people.
Took apart an old phone at work. Trying to get the ringer/bell off. The screw is stripped and I didn't use the metal saw yet, so...
The metal saw sucks. We already knew that.

-
Day 30
Site was down yesterday, so this is the post for day 30.

-
Day 30
I don’t have a modded Vic, but the Champion I carried for the challenge I did do quite a bit of work on. The aluminum liners had dings and light oxidation on them. I sanded out as much of the imperfections in the liners as I could. I also sanded the scratches and polished out the scales. Knife is all original, just cleaned up and ready to go for the next two decades of service.

-
That's a good idea on the opinels Gary. Never considered heating it up on the dash. Probably safer than by a space heater.
I thought for sure the site had transitioned last night as I couldn't get into MTO. I couldn't get my fix...... :o
<u>Day 29 - ketchup</u>
Used the mini-screwdriver to push down on the refill port of this leather so I can get the reminder of the old stuff out. It was pretty handy using it with the corkscrew as an extension.

-
<u>Day 30</u>
Mini-challenge
I've done a few scale swaps, which is the only mods I've done to a Vic SAK so far, but I'm pretty happy with this one. These are 3D printed scales I put on my Ranger that have held up pretty well for the last 2yrs. I don't daily it everyday but it does go into the rotation. I'm going to try and print some other ones with a finer nozzle to see how much I can improve the quality.
Oh and that's my pretty Silvertech Swisschamp.

-
Day 31
Bonus. Work Champ helping replace the inlet valve on the dishwasher. Dishwasher sounded funny and I realized it was cycling dry due to a faulty inlet valve.
[attach id=0 msg=2592586]

-
@AzteCypher said:
That's a good idea on the opinels Gary. Never considered heating it up on the dash. Probably safer than by a space heater.<u>Day 29 - ketchup</u>

I have to say the dash trick is still working a day later. Blades and locking rings are free as can be. Safe. Didn't cost a dime. Completely satisfactory fix. The Opies before were real nail pullers to get the blades started up and then took a strong grip on the blade to mostly pull them all the way up. They never actually reached the full open position. Lacked a fraction, but the locking rings would engage. Closed in fits and jerks as they grabbed all the way closed. I was completely burned out with Opinels before the dash experiment. I carried an Opi all day today. Still just as smooth as can be. Eventually, I'm sure they will tighten up again. Very damp here. However, I do know the key to fixing the problem now. Best wishes. G
-
I don't know who gave me the badge, but thanks!

-
Day 30 + 1
Completed 30 day portion.
Today last day traveling in Netherlands today, flight is Dunday morning. Do SC is now packed in checked bag.
So final picture from Europe
[attach id=0 msg=2592597]
-
Day 31
Mod mini challenge - I’ve only done a couple of scale swaps, emerald for the compact and Ti for the climber

-
Day 32
Mail duty

-
Day 31

Happy Halloween, everyone!
-
Day 30
Swiss Champ and Breast Cancer Awareness Classic because it is breast cancer awareness month.

-
Day 31
Used the small blade of the CT-41 to sharpen a pencil. Congratulations to those who have completed the 30-day challenge and good luck to those going on with the 60-day challenge.


-
Congrats and good luck, like Alan said!

Happy Halloween!
Day 31
Used the bottle opener on the Workchamp to pop open a can of Beanie Weenies.

-
<u>Day 30+1</u>
Got to enjoy a relaxation stick before the trick-treaters really started coming by.

Oh wait, forgot to take it out of it's sheathe. There we go....

-
Day 29
I'm always surprised by how well the wire stripper works.
[attach id=0 msg=2592632]
Day 30
FINALLY USED THE SEWING EYE!
[attach id=1 msg=2592632]
And that finishes all tools on the Outdoorsman and Champ+
TOOL USAGE:
Outdoorsman: <u>24/24</u> ALL USED
<u>Large blade: Bread bag</u>
<u>Small blade: Open butter</u>
<u>]Wood-saw: Ruler </u>
<u>Fish-scaler: Unstopping glue</u>
<u>with ruler: Saw </u>
<u>and hook remover: Apple</u>
<u>Scissors: Keyboard</u>
<u>Cap-lifter: Mexicoke</u>
<u>with screwdriver: Scraper</u>
<u>and wire stripper: Sump cord</u>
<u>Can-opener: Box</u>
<u>with screwdriver: Lock</u>
<u>Inline Phillips screwdriver: Sink cabinet</u>
<u>Magnifying glass: Pen tip</u>
<u>Wood chisel: Salt</u>
<u>Reamer/Awl: Drink lid</u>
<u>with sewing-eye: Belt scraps</u>
<u>Fine screwdriver: Hammer screws</u>
<u>Mini screwdriver: Balance</u>
<u>Multipurpose hook: Posing</u>
<u>Corkscrew: Bandana Knot</u>
<u>Keyring: Pocket </u>
<u>Tweezers: Splinter</u>
<u>Toothpick: Yep</u>
<u>Pen: Balance</u>
<u>Straight Pin: Balloon</u>**Champion Plus: <u>29/29</u> ALL USED **
<u>Metal-saw: Phone disassembly</u>
<u>with file: Nail file</u>
<u>and cleaner: Nails</u>Q?
<u>Bit-driver: Harddrive removal</u>

-
Life has been very busy and I’ve been away from the forum for a while. I come to check in and see that I’m missing this awesome challenge!
I’m a little bummed but it’s been fun seeing the pictures.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login