When blades attack ! Part One
-
i'd had a couple of "accidents" ::) (1 with an old sak, 3 with my spirit, 1 with my trident and 1 with a gerber evo jr), i think ive post some pics here and there :D
-
The only time I've cut myself(as opposed to a little "nick") I was trying to cut one of those little Super Balls in half. They're those little rubber balls that bounce really high. I was 15 and I was cutting into it with a dull knife. The knife slipped and I cut the crap out of my palm near my thumb. I still have the scar.
Since that day I've been extra careful and almost obsessed with keeping the blade sharp on my knives.
-
I had a friend try to see what was in the middle of a golf ball with a no name craptacular stockman. He was putting all his weight on it and the blade folded right into his fingers. He had to have some major surgery to reattach something or another in his finger joints.
Didn't stop us from seeing what was in the middle of that golf ball though >:D
(its a smaller ball filled with liquid) :D
-
The worst cut I've ever had was from the serrated blade on a Gerber multitiool. This was in 1993. I was cutting the lid off of a 5 gallon bucket, the blade was binding so I was applying a lot of pressure. Suddenly the blade came free and the force I was applying brought my hands together, slicing the webbing between my thumb and finger. It really opened me up, the cut was over 1" deep and I could see inside my hand. It took many stitches to close up and I ended up having to get it restitched since it opened up again a couple of weeks later (tough area to heal). I've certainly learned to be very aware of the force vectors involved when making a cut.
-
@Pacu said:
I had a friend try to see what was in the middle of a golf ball with a no name craptacular stockman. He was putting all his weight on it and the blade folded right into his fingers. He had to have some major surgery to reattach something or another in his finger joints.Didn't stop us from seeing what was in the middle of that golf ball though >:D
(its a smaller ball filled with liquid) :D
See when I tried to find out, I used a drill. Made a bunch of holes in it, smelt bad. But made a sweet noise after you hit it! :D
-
@Dizos said:
The worst cut I've ever had was from the serrated blade on a Gerber multitiool. This was in 1993. I was cutting the lid off of a 5 gallon bucket, the blade was binding so I was applying a lot of pressure. Suddenly the blade came free and the force I was applying brought my hands together, slicing the webbing between my thumb and finger. It really opened me up, the cut was over 1" deep and I could see inside my hand. It took many stitches to close up and I ended up having to get it restitched since it opened up again a couple of weeks later (tough area to heal). I've certainly learned to be very aware of the force vectors involved when making a cut.I cut the same area when I was about 11. I was trying to carve something and was cutting towards my hand :-[
-
This is the part where I'd like to publicly thank my various cub scouts and scout leaders for teaching me how to use a blade properly :D
That said what they didn't do such a good job of was teaching me how to clean and sharpen blades. I'm forever nicking myself cleaning knives up. What's worse is I own kevlar gloves, do I ever wear them ::) am I stupid ::)
Latest addition to the injury list was a slice to the tip of my left index finger whilst trying to get the action right on a Vic. 93mm awl
Only really painful injury from a multi was locking a Kershaw A100 onto the skin in the palm of my hand and then not being able to release it :ahhh
-
"Only really painful injury from a multi was locking a Kershaw A100 onto the skin in the palm of my hand and then not being able to release it "
did you check to make sure your Kershaw was alright?

-
I've had numerous little cuts, from drippers to squirters, but thankfully nothing serious enough to warrant stitches. :)
Especially nothing like this:
@Dizos said:
The worst cut I've ever had was from the serrated blade on a Gerber multitiool. This was in 1993. I was cutting the lid off of a 5 gallon bucket, the blade was binding so I was applying a lot of pressure. Suddenly the blade came free and the force I was applying brought my hands together, slicing the webbing between my thumb and finger. It really opened me up, the cut was over 1" deep and I could see inside my hand. It took many stitches to close up and I ended up having to get it restitched since it opened up again a couple of weeks later (tough area to heal). I've certainly learned to be very aware of the force vectors involved when making a cut.Oh my gawd that must have been painful!! :o And in that spot, it must have been painful for a looooonnnng time. :'(
-
@J-sews said:
I've had numerous little cuts, from drippers to squirters, but thankfully nothing serious enough to warrant stitches. :)Especially nothing like this:
The worst cut I've ever had was from the serrated blade on a Gerber multitiool. This was in 1993. I was cutting the lid off of a 5 gallon bucket, the blade was binding so I was applying a lot of pressure. Suddenly the blade came free and the force I was applying brought my hands together, slicing the webbing between my thumb and finger. It really opened me up, the cut was over 1" deep and I could see inside my hand. It took many stitches to close up and I ended up having to get it restitched since it opened up again a couple of weeks later (tough area to heal). I've certainly learned to be very aware of the force vectors involved when making a cut.
Oh my gawd that must have been painful!! :o And in that spot, it must have been painful for a looooonnnng time. :'(
It definitely took a long time. The pain wasn't really that bad, not having the full use of my hand for over a month was much worse. I was a landscaper at the time so it had a major impact on my work.
-
I did landscaping, but that ended bad for me...
Not cut related other than the surgeon cutting me open to put a plate and 8 screws inside me to fix the broken mess that was my collarbone... :ahhh
-
"Tragic, freak extreme wheelbarrow accident" :D
Pretty much the dumbest thing imaginable.
-
Oh ramps and running starts were my speciality... for messing up on. I had to re-shovel so much landscaping, just from dumped wheelbarrows. One flung me off the trailer, no idea how. But this one was involving a hill, and 350# of bricks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login