Multi Purpose Wrench
-
-
-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
The crony is taking alot longer than expected, especially since i still havent gotten a job after graduating and have no start up capital yet >:(
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
The crony is taking alot longer than expected, especially since i still havent gotten a job after graduating and have no start up capital yet >:(
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
Well, when the Crony is up and ready for purchase, you'd better let us know, because you know you have customers here wanting it.

-
That is pretty cool looking, a bit clunky tho
Funny thing though, i have designed a multitool companion which essentially consists of a 4" adjustable wrench modified to include a 1/4" bit driver similar to the swisstool ratchet in the end of the handle. It was designed to accomany any multitool i carry with the leatherman bit kit. pliers plus adjustable wrench can tackle almost anything, and the ratcheting bit driver is infinately useful. I'll try and load some of my pre-limiary sketches i saved from a while ago.
-Dough
I'd be interested in seeing your design Dough. :)
The crony is taking alot longer than expected, especially since i still havent gotten a job after graduating and have no start up capital yet >:(
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
Any chance of a sketch or are you keeping close to your chest for now?
-
@DoughDTD said:
Anyway, there will be a neat tool that will follow very shortly after the crony that will essentially be a small version of my design. I'm going to base it around a 4" adjustable wrench, so its small enough to stick right in a multi-tool sheath. There will be no storage for bits though, as my main plan is to design it to be able to use the leatherman flat bits. i really love that bit set because its so functional, versitile, and easy to carry around without being bulky.So, even though the crony is taking forever, the second tool from my custom tool line will be the "Accomplice"

-Dough
Sounds amazing, Dough! I wished for almost exactly what you described in my post near the top of this thread, so put me down for one!

I agree 100% with not having bit storage on the tool itself. LM bits would be great!
One thing I really liked about the design of this wrench was the CyberTool-style extender. Were you planning on having some type of built-in extender on your tool as well?
Will it be very hard to make a decent gear system for the wrench?
-
its going to accept standard 1/4" hex bits, but also be able to use the double sided flat bits...sorry if i was unclear on that.
i plan to include a bit extender with it, ala spirit ratchet or leatherman bit extender, that would essentially do the same thing.
-Dough
-
Get yer finger out Dough - I want my Crony (can't afford an Atwood :D)
-
Good things come to those who wait

I really want to get my company off the ground, and you guys who have supported the process and put up with these lengthy delays will get rewarded by having a specially marked "first run" edition of the crony if you choose to buy one. Hell, maybe itll be worth something someday(besides its weight in gold as an awesome tool! ::))

-Dough
-
@DoughDTD said:
Good things come to those who wait
I really want to get my company off the ground, and you guys who have supported the process and put up with these lengthy delays will get rewarded by having a specially marked "first run" edition of the crony if you choose to buy one. Hell, maybe itll be worth something someday(besides its weight in gold as an awesome tool! ::))

-Dough
Rather than wait though, we spend our money on other good things... then when your good thing comes around ,we won't be able to buy it! :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login