Show your slip joint's thread!
-
@Neil said:
I'd be happy to provide independent verification :PWell, I'm up here in Northwest Indiana close enough to Chicago that it's a easy drive across State lines, so just tell me when you'll be flying into O'Hare International and I'll come on up and pick you up there.......No problem!

2xTap :D
-
I'd be happy to provide independent verification :P
Well, I'm up here in Northwest Indiana close enough to Chicago that it's a easy drive across State lines, so just tell me when you'll be flying into O'Hare International and I'll come on up and pick you up there.......No problem!

2xTap :D
Touché :D
-
2xTap I LOVE those GEC knives. I've pretty much decided on a Tidioute #53 or #54 as my next purchase. I'm a huge fan of Case's Stockman pattern and have been wanting to try out a GEC knife for a while now. I just can't decide on a handle material ???
-
@GMArthur said:
2xTap I LOVE those GEC knives. I've pretty much decided on a Tidioute #53 or #54 as my next purchase. I'm a huge fan of Case's Stockman pattern and have been wanting to try out a GEC knife for a while now. I just can't decide on a handle material ???Yeah I just quoted myself. Because I'm a liar. Even though I was set on a #53 my willpower is weak and I just picked up a Tidioute #73 NIB on the bay for 38.00 + free shipping. I'm so weak when it comes to sweet sweet slipjoints. Pictures of my weakness will follow when knife arrives.
-
GMArthur,
Well, you got that for a steal....$38.00 for a NIB anything from GEC is a bargain at it's best.
So which Tidoute #73 did you get, Jack or Scout, and what handle material?
2xTap
-
I had ordered a couple Rough Rider slips a few days back and they arrived yesterday. These two were bought on a whim really. I like red bone, and I like smooth bone.....Red Smooth Bone is even better. And these two were sitting at $9.00 a piece with Free Shipping so I said what the hell. Glad I did! I've been a fan of RR's since their release, you can't beat the quality for the money.


The Stockman is their medium size one at 3 1/2" closed. The Trapper is fullsize at 4 1/8" closed. They both have RR's 440A stainless blades with matchstriker pulls, grooved nickle/silver bolsters, nickle/silver Horseshoe shield, brass liners and pins, and gorgeous Red Smooth Bone scales.


Fit and finish on both are exceptional, especially given their $9.00 price tags. Very little to fault either over. Both have virtually gap free fit all around, nice polish on the blades and bolsters, all blades have even grinds and very sharp edges, both knives sport relatively stout backsprings, both knives have pins polished flush to the scales, and there is no perceivable blade play on any of them.
The Stockman does have a slight hairline gap between the mainblade's backspring and the brass liner, up towards the pivot end about a 1/4" long. Faint and doesn't effect anything, very minor.....

The Trapper is seamless in it's backspring fit.......

......though the Trapper does have a tiny blemish. On the shield side scale there is a small nick in the bone next to the center pin. A very minor cosmetic issue.
All in all great slipjoints for the money, and two prime examples of what the RR's can be. And at this price point.....unmatched quality for what they are.
2xTap

-
Well, you got that for a steal....$38.00 for a NIB anything from GEC is a bargain at it's best.
So which Tidoute #73 did you get, Jack or Scout, and what handle material?
2xTap
It's a Scout model. Bocote wood scales. The only other wooden scale slipjoint I have is an old "tested" stamped Case that was my Grandpa's knife. I always liked wooden scales on a knife and at 38 bucks I couldn't pass it up. I'm still eye balling some #53's though. Just waiting for a deal on something that I "have to have".
By the way 2xTap I love reading your posts on knifeforums in The Slip Joint. I've been a member there for a while now but just lurk and never post.
-
GMArthur,
A Bocote #73 Scout for $38.00.......I'd of jumped on it too. You got that one at a great price. Look forward to seeing pics of it.
Glad you enjoy my ramblings over there. Feel free to jump in anywhere over there and post. It's a good forum with good people who all enjoy the same thing. The more the merrier.......we all have fallen to the "Dark Side" so join on in!

2xTap
-
Perhaps this is blasphemy but does anyone have/like the OHO Case....I like the looks of them....
-

This one and a friend is up in the swap shop at the moment. Perhaps someone has an interesting USA made slippie they'd like to swap? Just a thought, it'd be nice to play with something a bit different.
-
You'll never, ever break one either

-
I got one of those. :D
-
Managed to get some pics done of a few in my recent haul............
Rough Rider Fancy Congress in Mother of Pearl with Abalone shield:

Rough Rider Large Stockman in smooth Yellow Delrin:

Rough Rider "Man Series" Large Stockman in Blue Smooth Bone:

Rough Rider Large Stockman in Mother of Pearl with nickle/silver spacers:

Marble's "Global Series" Jumbo Trapper in Brown Stag Bone:

I got a few more I still need to take pics of. Great quality knives for the money here!

2xTap
-
Well I received my Tidioute #73 yesterday. I have to say that this is by far the dullest knife that I've ever handled. I honestly have spoons in my kitchen that are sharper. I'm starting the process of trying to put an edge on the blades. My sharpening ability is such that I can maintain an already established edge very well by freehanding, but when starting from scratch where basically no edge bevel exists I'm having a hard time.
I do have to say that from my first impressions of this GEC slipjoint I doubt I will get another from this company. It's a shame as I was looking for a nice single blade with a stag handle. I like GEC's stag much better than what Case offers, but at least the Case knife would be able to cut something. If I manage to get an edge on the blades I will post up some pics of my success. If not then I'll take it in to the machine shop at work and use the belt sander to try and put an edge on it. I will post pics of the destruction that causes as well.
-
Well, I'll throw in a couple more of mine. This is my Kissing Crane Congress, and a Rough Rider Sawcut Bone Stockman. As you can see, the Stockman is...large... :D

-
@GMArthur said:
Well I received my Tidioute #73 yesterday. I have to say that this is by far the dullest knife that I've ever handled. I honestly have spoons in my kitchen that are sharper. I'm starting the process of trying to put an edge on the blades. My sharpening ability is such that I can maintain an already established edge very well by freehanding, but when starting from scratch where basically no edge bevel exists I'm having a hard time.I do have to say that from my first impressions of this GEC slipjoint I doubt I will get another from this company. It's a shame as I was looking for a nice single blade with a stag handle. I like GEC's stag much better than what Case offers, but at least the Case knife would be able to cut something. If I manage to get an edge on the blades I will post up some pics of my success. If not then I'll take it in to the machine shop at work and use the belt sander to try and put an edge on it. I will post pics of the destruction that causes as well.
Maybe yours missed quality control ???
I'd shoot them an email mate, and see if they sort it out for you :)
-
@Mike, Lord of the Spammers! said:
Well I received my Tidioute #73 yesterday. I have to say that this is by far the dullest knife that I've ever handled. I honestly have spoons in my kitchen that are sharper. I'm starting the process of trying to put an edge on the blades. My sharpening ability is such that I can maintain an already established edge very well by freehanding, but when starting from scratch where basically no edge bevel exists I'm having a hard time.
I do have to say that from my first impressions of this GEC slipjoint I doubt I will get another from this company. It's a shame as I was looking for a nice single blade with a stag handle. I like GEC's stag much better than what Case offers, but at least the Case knife would be able to cut something. If I manage to get an edge on the blades I will post up some pics of my success. If not then I'll take it in to the machine shop at work and use the belt sander to try and put an edge on it. I will post pics of the destruction that causes as well.
Maybe yours missed quality control ???
I'd shoot them an email mate, and see if they sort it out for you :)
I did email them. However there was so many things wrong that I just began fixing the knife myself. I was planning on the knife being a user so I'm not that picky about the little fit and finish issues. I cannot stand getting a dull knife though. If your in the knife manufacturing business and can't put at least a solid working edge on your knives you won't last long. I've gotten a few Cases that had wire edges or might not have been as sharp as I would like them, but at least they could cut something and only needed a touch up. I don't have a diamond benchstone so I've been working on sharpening up a single blade on the #73 for hours and I'm not there yet. I will see what reply the folks at GEC send me, but I really think I'll stick with Case from now on.
-
@Mike, Lord of the Spammers! said:
Well I received my Tidioute #73 yesterday. I have to say that this is by far the dullest knife that I've ever handled. I honestly have spoons in my kitchen that are sharper. I'm starting the process of trying to put an edge on the blades. My sharpening ability is such that I can maintain an already established edge very well by freehanding, but when starting from scratch where basically no edge bevel exists I'm having a hard time.
I do have to say that from my first impressions of this GEC slipjoint I doubt I will get another from this company. It's a shame as I was looking for a nice single blade with a stag handle. I like GEC's stag much better than what Case offers, but at least the Case knife would be able to cut something. If I manage to get an edge on the blades I will post up some pics of my success. If not then I'll take it in to the machine shop at work and use the belt sander to try and put an edge on it. I will post pics of the destruction that causes as well.
Maybe yours missed quality control ???
I'd shoot them an email mate, and see if they sort it out for you :)
I did email them. However there was so many things wrong that I just began fixing the knife myself. I was planning on the knife being a user so I'm not that picky about the little fit and finish issues. I cannot stand getting a dull knife though. If your in the knife manufacturing business and can't put at least a solid working edge on your knives you won't last long. I've gotten a few Cases that had wire edges or might not have been as sharp as I would like them, but at least they could cut something and only needed a touch up. I don't have a diamond benchstone so I've been working on sharpening up a single blade on the #73 for hours and I'm not there yet. I will see what reply the folks at GEC send me, but I really think I'll stick with Case from now on.
At least with Case the qualities assured :)
And I agree, they should of at least put a decent edge/bevel on it ::)
-
I did get a nice prompt reply from GEC this morning. They said I could send the knife in with a note describing the problem(s) and they would take care of it for me. This is good. It's nice they stand by their product. I'll probably work on the edge a bit more tonight and if I can't get it where i want I'll send it in and let them have a go at it.
-
@GMArthur said:
I did get a nice prompt reply from GEC this morning. They said I could send the knife in with a note describing the problem(s) and they would take care of it for me. This is good. It's nice they stand by their product. I'll probably work on the edge a bit more tonight and if I can't get it where i want I'll send it in and let them have a go at it.Keep us updated please mate

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login