Observations on EDCing the Core
-
Here is the post on the mod:
<a href="/topic/15052 the Velcro with Snaps On a Nylon Sheath</a>
-
Let's have a Core pic :)

or two....

-
One short of a six pack

The one on the right was the used one I first purchased. From the outside it looks like it spent a couple of years at the bottom of a tool box. But when I opened it up, except for a little wood dust in the file, everything was in unused condition. :D
-
Core Freaks.... ::) ::)
Great writeup, turnsouth

and I'm still drooling over the pictures from both of you. :o :D -
Observations on two more of the Core's tools that I've used:
First was the Can Opener:
In my experience there is a balance that needs to be met when selecting a can opener, strength versus thickness/size. For example with a P-38, you have a small thin compact tool that does the job well, but it does take 38 movements to open a 2 inch can, and with it's small size it can be tiring on your fingers. On the other hand you could have a long thick opener, that opens a can quickly, and easily, but tends to distort/bend the can lid as it cuts through. This bending doesn't matter too much for the first half of the lid, but when it begins to push the lid into the contents of the can on the second half, it ends up being a mess (not to mention the small cuts that can come from trying to get the bent lid out of the can).
With the Core being such a large tool one would think that the opener would tend to be on the burly side, but Leatherman seems to have taken these issues, I mentioned, into consideration. The blade on the opener is 16mm long, and the tool itself is one of the thinnest of the fold out tools at about 1.5mm. It's beveled from the tip to 3mm past the blade. All this lends itself to a very good combination that cuts through a large amount of metal with each swing, and yet it cuts most of the can open before it starts to move the lid.
Something I was concerned about with the opener, is it's position in the tool itself. With lever type openers there is a need to to have the opener perpendicular to the can, and room to swing it in order for it to function. With the Core there were two considerations, first is the thickness of the tool as a whole, second is a design element of all MTs with fold out tools that open from the interior, and that is that the working end of the tool does not point to the outside of the MT's body. But there were no problems using it at all, I continue to be impressed by the research, development,and design of this tool.



Second was the Ruler:
The ruler is convenient and accurate for quick measurements. The only caveat that I have is that I wish they would have marked out at least 1 inch with 1/16 inch marks. Sometimes you just need to know the length of something down to the 1/16. But for fine measurements, the millimeter ruler serves the purpose, and the lack of the 1/16 marks becomes more of inconvenience than a hindrance.
Sheath Report:
Overall my impressions of the nylon sheath were mostly unchanged. There were just two new things that I wanted to mention, as the sheath broke in it became even more comfortable to wear, and the other was how much I loved having snaps on it, instead of Velcro.
One of the main things that led me to do the mod, was when I was in the hardware store. I had recently purchased a replica wood ammo box to keep my MTs and knives in, and I was looking for hooks that I could screw into the wood. But I needed a specific length of thread on the screw end, and I thought “I can just use my Core ruler”. When I opened my sheath in the tall isle with the tile floors, it was like a Velcro megaphone. What was worse was when, after I was done using the ruler, I had to open the Velcro again with no tool in it, and it was twice as loud with the empty sheath.
After replacing the Velcro with the snaps, it became a pleasure to open the sheath. As a matter of fact, I was enjoying it so much, I was hesitant to make the switch to the leather sheath. But I decided to make the switch anyway, so I could give the leather sheath a fair try also.
The leather sheath:
-
It rides higher than the nylon - It's not uncomfortable, but I did notice it more.
-
Has quick access - Just one snap.
-
The traditional Leatherman look - Gives an everyday working man appearance, instead of a “tactical” look.
-
Sheath shape - I carry my Core over my right pocket, and with the nylon sheath and its tapered edges, it never got in the way of reaching into my pocket. But with the leather sheath and its squared corners, it does keep me from sliding my hand right into my pocket. It isn't always a problem, but if the sheath is in a certain place, I have to reach around, or move it to get into my pocket.
-
With the design of the nylon sheath the tool is gripped tighter and requires a little consecration to get it back into the sheath. But with the leather sheath, and its preformed shape, the Core goes in and out of the sheath quickly. I found it easier to use when I was doing something that required focused attention. Although there was one small inconvenience. With the shape of the Core, and it not being tapered at the pliers end, when the sheath was new the tool would catch on the brass rivets at the bottom of the sheath as it was inserted. But this went away after a few days as the brass wore slightly and became less sharp on the end.
-
Real leather - gets scratches, dents and dings. Gives it some personality.
-
One thing that have found with leather sheaths, and using them in EDC with a tool that is used often, is that they “break-in” like all leather items, they will become soft and supple. Whether this is a good thing, for the most part, is just a matter of personal preference. Some like the new looking firm leather, others like when the leather softens, and the edges loose their finish giving it the “well used” look. I have found in the past, (with my ST200) that when the leather does soften, the snap becomes stronger than the leather. Not that it cannot be opened, but that the closure flap feels like it's stretching when it's pulled on to open the tool. Like I said it's more a matter of personal preference.
The Core in it's all leather outfit:



-
-
Thanks for all the updates,really liked the snaps on the nylon sheath,and the screwdrivers on the Core are some of the best I've used,this week I'm carrying my Supertool in a Surge leather sheath,with ceramic rod and black fisher space pen.
& 
-
Sure glad everyone likes the Core. Mine has a snapped off jaw just from trying to bend a finish nail. I know I know...send it back to Leatherman. Someday I will. What's the point though? I don't think I can trust the jaws after this. I wish my Core had strong jaws like the ones you guys say you have.

-
Ouch, that sucks. :( That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.
-
Yeah send it back bit was probably a bad cast. I beat the crap out of my multis and I've never damaged the jaws, even on my skeletool.
-
@Gareth said:
Ouch, that sucks. :( That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.Do me a favor and get a nail to replace a cotter pin on a hand truck. Take your Core and bend the nail. That's all I did.
I can't tell if there is a flaw or not. Maybe I used the tool too hard and payed the price

-
Ouch, that sucks. :( That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.
Do me a favor and get a nail to replace a cotter pin on a hand truck. Take your Core and bend the nail. That's all I did.
I can't tell if there is a flaw or not. Maybe I used the tool too hard and payed the price

I really don't think so, either a) you should be able to bend the nail without breaking the jaw, or b) the nail is too tough and won't bend, but you still shouldn't be able to break the jaw.
The only multitool jaw I ever broke was on my Supertool and I was really stupid. I tried to prise something free by sticking the tip of the jaw into a hole and then put a good amount of pressure on it. Oddly enough it snapped. ::)
-
That is 1 thing on the Core that never failed me
I even put a 16dd nail in it just to see if it would cut it and sure enough it snapped the nail into but I had to use my foot to have enough pressure cut the nail :o It had to have been a defect in the plier head I am sure if you tried the same thing with many other Core plier heads that it would have bent the nail and kept on truckin
but it is a tough thing to have a tool fail on you :-\ Best of luck with whatever you decide to do with it man :) -
Ouch, that sucks. :( That sounds like a flaw to me though, rather than something that's common to the whole of the Core line.
Do me a favor and get a nail to replace a cotter pin on a hand truck. Take your Core and bend the nail. That's all I did.
I can't tell if there is a flaw or not. Maybe I used the tool too hard and payed the price

That's a flaw! Probably a bad casting as the guys have said. I've put my entire body weight on a Core's jaws many times and lifted myself off the ground!
-
But Dave that means nothing as you are a midget. :P
-
A fat midget though - be fair ???
-
Ah, good point that
:D -
-
Definitely a manufacturing flaw, as I bent a ton of nails and hooks, not to mention cutting them, with my core just recently and the jaws never snapped. Just send it back and get one that isn't flawed.
All manufacturers have some bad units, no matter how good they are. Most Toyotas are reliable and bulletproof, but occasionally a bad one gets through. It's how the manufacturer deals with the problem that really counts.
-
Thanks Guys.

I guess what gets my goat is that I just can't get in my car and go to Sears and grab a new one and be done with it! Does Craftsman make a lifetime guarantee multitool??
Anyway, it's been over a year since I broke my Core and making my way to the UPS center is not a priority right now. I did buy Blast and it works for now.
Sorry to hijack the thread....carry on.

-
They're very quick about getting your stuff back to you. I sent in my skeletool last week and got it back in less than 7 days. I just sent it in via usps.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
