D.O.M.S
-
This is an interesting thread topic, and one that has gotten to me lately.
I'm a cargo surveyor- my job is to assess the condition of cargo at transfer points. Which means, basically, that I say if anything is broken or missing when something changes hands, so the insurance companies know who gets to pay for it.
The job I am working on all this week is wood pellets- the kind for a pellet stove, only these are aimed at industrial use rather than residential. Not much difference between the regular residential ones really... anyways, the freepack them on the ships, which means the ship cleans out the hold(s), opens the top and a giant pipe feeds loose pellets in there until it's full. My job is to verify the condition of the pellets, by taking samples about every 500 tonnes (roughly every 45 minutes) and perform a moisture analysis on them. Not a big deal- the analysis machine does most of that work for me. The hard part comes from where I take the samples- at the top of the elevator. The "elevator" isn't what everyone traditionally thinks of as an elevator- it's not the kind of thing where you get in the box and press the button for the floor you want, the elevator is a series of treadmills that run for about half a mile, raising the pellets from where they are loaded at ground level to a point high enough where they can be loaded on the ship. The spot where I take my samples from is about 100 feet from the ship itself, and is about ten stories high. Since wood pellets create a lot of dust, there's no traditional elevator, which means ever 45 minutes I get to run up 119 stairs, take about 20-25 pounds of pellets off each belt (two belts) then come down 119 steps, grind up a handful of each for moisture analysis, bag up about a kilo of each for sampling at a later date if there's a problem, then carry the remainder back up the stairs to start all over again. I need that much sample because I need a significant amount to retain the temperature until I can probe it at the bottom, since my digital temperature probe isn't allowed in the building- wood dust only needs one tiny spark to make me have a real bad day.
That's the why of what I do, but it pertains to this thread because by the time I am done (one sample ever 500 tonnes, we load on average about 6,000 tonnes, plus at least one extra trip at the beginning) I have climbed the equivalent of 1,547 stairs, each time with 40-50 pounds of weight. By way of comparison, the Empire State Building has 1,576 stairs, according to the official ESB website. This week, between two ships, we'll be loading almost 15,000 tonnes, which means I will climb that bloody elevator over 30 times.
You can imagine my joy at doing that, so if anyone has any sore, tired, stiff muscle remedies, I'd sure love to hear them!
Def
-
What is this fitness stuff of which you speak ??? :D
-
Irn-Bru! Scotland's traditional cure-all. :D
If that somehow doesn't work then a long soak in a hot bath is in order.

-
You should do nothing it stems from a lack of exercises in the first place or you have over worked a particular muscle group,the stiffness/soreness is actually damaged muscle and needs rest to heal :D
-
That's true John, the poor little fibres are trying to knit themselves together again after being abused essentially. That said, certain things can help a bit in my experience.
A combination of ice and/or heat can be effective, and a hit bath certainly won't hurt as it gets you to relax a bit. A few drops of lavender oil in it will also aid that process a little (and a beer etc).
Arnica either as a cream to rub in or pills (30c) to take really works for me, especially if there's any bruising involved. Get in on/in you ASAP - don't wait for the pain to start.
I also use liniment sometimes. You can get various sports rubs for achy muscles and such but the one I use is for rheumatism, although I'm sure it's good general purpose stuff.
-
Dare I say the green wonky leaf can help,try in cake form >:D
-
Just to add to what Nuph said, incorporating stretching into a daily routine will help. If a new job or new strains at a job are the culprit then you will eventually not hurt as much as your muscles heal and get used to the activity. But stretching out everyday, 30 sec stretch is all it takes will go a long way toward helping. Also, lots of water. None of this is a cure all, but it does help. Feel better guys. :)
-
@Grant Lamontagne said:
This is an interesting thread topic, and one that has gotten to me lately.
...
This week, between two ships, we'll be loading almost 15,000 tonnes, which means I will climb that bloody elevator over 30 times.You can imagine my joy at doing that, so if anyone has any sore, tired, stiff muscle remedies, I'd sure love to hear them!
Def
There's got to be a better way...
Seriously, this procedure doesn't seem very efficient or well thought out. First thing that comes to mind is an explosive atmosphere certified temp probe. That'd at least save carrying samples up and down.
One remedy that I've experimented with is pre-exertion Vitamin C loading - read an article on this topic in one of the outdoor magazines and decided to try it.
The theory is that taking large doses of Vitamin C a few hours before exercise will help with muscle soreness afterward.
If the exercise is prolonged, like working construction all day, topping off with another dose of Vitamin C at lunchtime will keep levels up.
Seems to work for me to some extent in avoiding the worst muscle soreness, but haven't done enough systematic tests to know for sure.
.
-
Cyclobenzaprine 10MG Tablet :o
works wonders after doing a double century in cycling. :D
-
@Grant Lamontagne said:
This is an interesting thread topic, and one that has gotten to me lately.
...
This week, between two ships, we'll be loading almost 15,000 tonnes, which means I will climb that bloody elevator over 30 times.You can imagine my joy at doing that, so if anyone has any sore, tired, stiff muscle remedies, I'd sure love to hear them!
Def
There's got to be a better way...
Seriously, this procedure doesn't seem very efficient or well thought out. First thing that comes to mind is an explosive atmosphere certified temp probe. That'd at least save carrying samples up and down.
Something along this line perhaps: http://www.comarkltd.com/product.tpl?product_id=41
The key term is "Intrinsically Safe".
-
Actually loading up on arnica before you get ruined can work really well - I have this in confidence from people who know aerial trapeze artists ;)
Incidentally, if I type arnica, my spellchecker thinks it should be either arsenic, fornicate, carnival or harmonica.
Now isn't that ever so bloody helpful??
:-\
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
