Having a computer problem- need some help
-
Hehe Yeah its often the case. You solve one problem and another will appear just as you think its all sorted >:D
Where abouts in the installation does that error appear. E.g Just as Setup scans for Hard Drives, as it is transferring files, after windows is installed etc
-
Some things I ran across are .... disable Ultra DMA access on CDRWdrive and set any CD/DVD drives to cable select. Replace the possibly corrupted ntdll.dll file, it should be in C:\Windows\system32
Find one here:
http://www.dlldump.com/download-dll-files_new.php/dllfiles/N/ntdll.dll/5.1.2600.2180/download.htmlGood luck,
Mike -
Running it now for you....
Setup Loading Files (runs through all kinds of things, but I have faith in Colonel DeBugger to keep it straight)
Setup Starting Windows
Blue Screen. This time I got:
"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for any hard drive corruption, and then restart your computer.
Technical information:
*** STOP: 0x0000007B (0xF7A22524, 0XC0000034, 0X00000000, 0X00000000"
It's a brand new hard drive, and has been tested, so I doubt it's the problem.
Def
-
What did you try and did you do them one at a time? Can you start it in safe mode?
Mike
-
@Defender said:
Running it now for you....Setup Loading Files (runs through all kinds of things, but I have faith in Colonel DeBugger to keep it straight)
Setup Starting Windows
Blue Screen. This time I got:
"A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Check for viruses on your computer. Remove any newly installed hard drives or hard drive controllers. Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for any hard drive corruption, and then restart your computer.
Technical information:
*** STOP: 0x0000007B (0xF7A22524, 0XC0000034, 0X00000000, 0X00000000"
It's a brand new hard drive, and has been tested, so I doubt it's the problem.
Def
That could be when Windows loads its files (remember they are going into RAM not on your HDD), it then will then search for the HDD, which is when yours seems to go kaput. This could be down to the SATA driver for your HDD. Go onto HP's website and put in your model number. Click Software and Downloads (or something like that). Click Drivers and you should see a SATA driver. Just download it and put it onto a floppy. When windows setup first appears it should say down the bottom "press F6 if you need to install...". Press F6, nothing will happen just yet, it will load the remaining files then it will read from your floppy. Select the driver and hopefully that might solve it.
-
No floppy drive on that machine- can I use an SD card, or burn a CD?
Def
-
Hey Def... I don't know if this helps or not. I was having trouble loading XP Pro on one of my machines. It would do the initial format, then copy windows, and when the system restarted it wouldn't go into windows to finish the setup, it would just stall out.
It turns out the drive was too big (I'm assuming too big for my Bios... could be wrong) Once I broke the drive up and formatted it (in FAT32 as opposed to NTFS) the setup took off without a problem.
-
Interesting suggestion. Maybe XP is to blame! :P
Def
-
@Defender said:
No floppy drive on that machine- can I use an SD card, or burn a CD?Def
I don't think you can. I have always used an external Floppy drive when I've needed to load SATA drivers onto someones PC. You could try it i suppose but I believe Windows only searches for the floppy drive when you press F6, it might be worth a try though.
If that don't work just disconnect the floppy out of your other PC and pop it into yours, it will only take a few mins.
I'm not saying this will 100% solve it, but by the sounds of it your Windows Setup seems to crash just after it ha put the files into RAM then searches for the Hard Drive, which is what makes me believe it could be the SATA drivers (or lack of). Have you ever made past that bit. Has Windows Setup ever displayed your HDD or said "No Hard Drives are installed" at any time??
-
Honestly, I don't remember. I've been having similar problems with another computer as well, and I can't remember which errors go to what machine! :D
Def
-
Join the club! I have 5 computers on the go at the moment and i keep losing track of which files are on which machine! I do tend to run out of monitors aswell so i end up having them running on VNC and tryin to remember which computer i am on and which i should be on is a nightmare, but now i think i have everything setup as i want it so its not too bad anymore. (for those that are interested, 1. main computer 2. legocomputer (for playing music) 3. tablet pc for taking with me 4. Media Centre downstairs for the whole house to use. 5. laptop that is being converted into a digital photo frame.)
-
Sounds like my jumble...
I have my main machine that I do most of my work on. I've always had a second machine doing some of the heavier loads that don't require a user- stuff like Skype, bit torrents, Kazaa, Limewire, you name it. That machine is also in pieces right now. It worked when I left for vacation, and my house/dog sitter disconnected it (she swears that's all she did) to hook hers up, and now I haven't a clue why it won't work. I wanted to hook up a third desktop to the TV/cable to use as a PVR. The I have my laptop, which is useless for just abotu anything but word processing, but then that's all I need it for. Still, be nice to have a wifi card for it...
Def
-
Dont know if you fixed the problems but things to try:
- BIOS up to date?
- Is the motherboard able to handle SATA drives?
- License issue see http://www.biermann.org/philipp/STOP_0x0000007B/
-
I am picking up a few dollars from some extra work this week, and I'm going to hand it off to a pro to see what can be done. Otherwise, I'll throw it off a bridge.
I hate canned machines.
Def
-
What model HP is it? We have a gold service contract with HP at work for our Tru64's. I may be able to finagle an answer out of our rep, he does go the extra mile for us.
-
Pavillion a1016x
Def
-
I sent an email to support they may help but they are the UNIX part of HP. Talked to a desktop support person here and he said to check:
-
Format and wipe the drive before install. Using disk utility from hard drive manufacturer. Aborted installs may
leave corrupted files -
Double check your power and SATA cable connections
-
Enter the BIOS and set to defaults.
-
Remove any secondary connected CD, ZIP or Hard drives before install
-
Try new install media or CD drive
-
Install through the recovery console - press "R" when is says Welcome to Setup - check the web for details
-
-
I may give those a shot before handing it off to a pro, just to be absolutely 100% certain.
As for buying a Mac, well those are canned machines too, aren't they? :P
Def
-
Can I recommend that you set fire to the thing or jump up and down on it (once took revenge on an awkward barbeque in that manner)instead of throwing off the bridge it's far more satisfying to watch the blasted burn /disintegrate before your eyes and you don't get fined for littering if the
see you
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login