Which FOLDING KNIFE did you carry today?
-
I'll see if I can find the diagram which showed it really well...
-
Can't seem to find it now, but basically you put the rods in the 40 degree slots as normal and then raise the right hand side of the base of the Sharpmaker until the rod on the right is completely vertical. Then you sharpen the one side until you can feel a burr forming on the unground side and then by resting the blade flat against the vertical rod, you knock that burr off. Works really well.
Carrying said Emerson today with my Ferrrk'd scales;

-
the little esquire in my hip pocket,

paul

-
Delica 4
-
@Benner said:
Can't seem to find it now, but basically you put the rods in the 40 degree slots as normal and then raise the right hand side of the base of the Sharpmaker until the rod on the right is completely vertical. Then you sharpen the one side until you can feel a burr forming on the unground side and then by resting the blade flat against the vertical rod, you knock that burr off. Works really well.Thanks!

So you practically end up with a 40 degree chisel-grind edge (and btw a left-handed at that), correct? I somehow thought that Commanders are V-grind and you were right-handed... :-\
-
They are V-ground, but have a chisel ground edge (if that makes any sense). The grind is on the "wrong" side on all Emersons. Can't remember the details but it is kinda his trademark. John will know more than me.
-
He mentions something to the effect on his website about it being the opposite from the traditional japanese chisel grind, and liked the visual aspect of it more. He also said it shouldn't hurt performance no matter what hand you use it with.
-
Tried to cut an apple in half with a chisel edge knife once, will never use a chisel edge knife again.
-
What happened? :o
-
Oh I didn't cut myself or anything, but I never knew cutting in a straight line was that hard.
-
I don't have any problems with them. I actually get on with mine really well.
-
@Benner said:
I don't have any problems with them. I actually get on with mine really well.I can get on with chisel grinds IF they are set up for right hand cutting - such as the Vic OHT series.
Maybe you guys can enlighten me as to why so many chisel ground blades are set up for left hand use?
Seems like it would be the opposite, with most being ground for right hand use.
.
-
You mean apart from Emersons? Can't really think of any TBH.

-
Nuttin new here... the trusty UKPK in my pocket.
I did however bestow upon a new teenager, a black Swiss champ for his 13th birthday today, and he used it to open other presents with! I think it has gone down rather well :)
-
Very nice gift for a 13 yo.
I'm sure he will be very impressed with it for a long time
to come. -
@nuphoria said:
Nuttin new here... the trusty UKPK in my pocket.I did however bestow upon a new teenager, a black Swiss champ for his 13th birthday today, and he used it to open other presents with! I think it has gone down rather well :)
A SAK with black scales and all the bells & whistles? There's not a 13 year old boy on the planet that wouldn't like that.

-
Today a SOG ACCESS Card 2.0 will help me opening my presents. When I find a knife in one of them, I guess I will use that one, and so one...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

