Wenger disappointment. Backspring distortion
-
I suggest you just bend it back, Gene.
-
This is how I fix the problem. The tang of the corkscrew must be firmly clamped in a vise.
The area that gets bent is the junction of the tang and worm, it usually doesn't take much tweaking to fix the problem.

-
@Spork, Lord of Lime Jello! said:
This is how I fix the problem. The tang of the corkscrew must be firmly clamped in a vise.The area that gets bent is the junction of the tang and worm, it usually doesn't take much tweaking to fix the problem.
Good picture.
My only problem with that is, how many times can you do that before the worm cracks right off the tang?
IMO, it is a production flaw.
-
@Mr. Whippy said:
@Spork, Lord of Lime Jello! said:
This is how I fix the problem. The tang of the corkscrew must be firmly clamped in a vise.
The area that gets bent is the junction of the tang and worm, it usually doesn't take much tweaking to fix the problem.
Good picture.
My only problem with that is, how many times can you do that before the worm cracks right off the tang?
IMO, it is a production flaw.
It happens to both Vic and Wengers...I've tweaked at least a dozen of them. Like I said, it doesn't take much to bring it back to true, it looks like you would have to bend a lot more than you really do. If it does finally snap off there's always the warranty to fall back on.
Of all the used and junker knives I've been through I don't recall any with broken corkscrews at that point.
-
@Spork, Lord of Lime Jello! said:
@Spork, Lord of Lime Jello! said:
Of all the used and junker knives I've been through I don't recall any with broken corkscrews at that point.
I take that back...I've had a few junker 108 GAKs with broken worms...and reamers :P
I bought a couple used GAKs from a local surplus dealer a few years ago. They simply had a big box full, you fished around for the one you wanted. All makes, Vic, Adler, etc. the most interesting thing is that they were all used pretty hard. Every one had a bent/broken knife tip, as if they used it as a screwdriver/paint can opener. Most had been bent roughly back into shape or had a tip crudely ground back. Most seemed to have taken a mud bath and quickly hosed off. I recall a few had broken/bent corkscrews and awls. Made me wonder what the troops were taught to use them for, as the damage was so uniform.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
