Wenger disappointment. Backspring distortion
-
-
No, Gareth, that's pretty well the bottom line....
Def
-
Hi
Have only opened a few winebottles with my Vic Explorer and Compact. They are unharmed :) Not sure if you people have noticed that many wine bottles has a new material for the cork. The older ones was real cork(atleast i think so). Some of the new bottles has a cork made of a plastic/rubber that require more strenght to open gives a real pop!! I used the Vic Compact on one of them and no damage at all. maybe a stronger wine opener will have to be made atleast by Wenger.
NM
-
Oh, how they mocked the Flair, but I bet it's smiling secretly to itself now.... :D
Good points about being made deliberately soft to avoid snapping, and also those new rubbery corks that seem to be getting popular - could be a combination of the two maybe?
That said, I've opened loads of bottles of wine with a Vic corkscrew and suffered no ill effects. You do get a feeling of them being a bit vulnerable though, and they are quite hard work comparatively. I got bought one of those monster "professional" corkscrews for Christmas a couple of years ago, which I always use if at home these days.
Teofilo - you should definitely contact Wenger about that - it surely must be covered!
-
i'm not a wine drinker, but here in australia corked bottles are getting rare.
Most are screwtops, some a synthetic cork. The dearer brands tend to be scewtop
Laugh all you want but a wine-loving friend said its a god send. Since most people don't know how to treat corked wine it stops her from having to be polite drinking an expensive label that now taste like vinegar...Viva-la-Backspring-Phillips

-
I suggest you just bend it back, Gene.
-
This is how I fix the problem. The tang of the corkscrew must be firmly clamped in a vise.
The area that gets bent is the junction of the tang and worm, it usually doesn't take much tweaking to fix the problem.

-
@Spork, Lord of Lime Jello! said:
This is how I fix the problem. The tang of the corkscrew must be firmly clamped in a vise.The area that gets bent is the junction of the tang and worm, it usually doesn't take much tweaking to fix the problem.
Good picture.
My only problem with that is, how many times can you do that before the worm cracks right off the tang?
IMO, it is a production flaw.
-
@Mr. Whippy said:
@Spork, Lord of Lime Jello! said:
This is how I fix the problem. The tang of the corkscrew must be firmly clamped in a vise.
The area that gets bent is the junction of the tang and worm, it usually doesn't take much tweaking to fix the problem.
Good picture.
My only problem with that is, how many times can you do that before the worm cracks right off the tang?
IMO, it is a production flaw.
It happens to both Vic and Wengers...I've tweaked at least a dozen of them. Like I said, it doesn't take much to bring it back to true, it looks like you would have to bend a lot more than you really do. If it does finally snap off there's always the warranty to fall back on.
Of all the used and junker knives I've been through I don't recall any with broken corkscrews at that point.
-
@Spork, Lord of Lime Jello! said:
@Spork, Lord of Lime Jello! said:
Of all the used and junker knives I've been through I don't recall any with broken corkscrews at that point.
I take that back...I've had a few junker 108 GAKs with broken worms...and reamers :P
I bought a couple used GAKs from a local surplus dealer a few years ago. They simply had a big box full, you fished around for the one you wanted. All makes, Vic, Adler, etc. the most interesting thing is that they were all used pretty hard. Every one had a bent/broken knife tip, as if they used it as a screwdriver/paint can opener. Most had been bent roughly back into shape or had a tip crudely ground back. Most seemed to have taken a mud bath and quickly hosed off. I recall a few had broken/bent corkscrews and awls. Made me wonder what the troops were taught to use them for, as the damage was so uniform.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






