Leatherman MUT?
-
I like the Mut and would like to have one. That said i shoot a M4 all the time and i don' think the Mut would be very useful for cleaning it. The AR style rifle can be cleaned with a bootlace, rag, light oil, spent round and a unfired round. I use a GI cleaning kit with extras that is total over kill. The two things i find useful on the Mut is the carbon scraper and punch. They can be replaced a unfired round to push the take down pins and a empty case with the mouth flattened that makes a good carbon scraper.
1jump2many, I use a cut q-tip on a hemostat to clean behind the locking lug.

-
@Mike 56 said:
I like the Mut and would like to have one. That said i shoot a M4 all the time and i don' think the Mut would be very useful for cleaning it. The AR style rifle can be cleaned with a bootlace, rag, light oil, spent round and a unfired round. I use a GI cleaning kit with extras that is total over kill. The two things i find useful on the Mut is the carbon scraper and punch. They can be replaced a unfired round to push the take down pins and a empty case with the mouth flattened that makes a good carbon scraper.1jump2many, I use a cut q-tip on a hemostat to clean behind the locking lug.

Mike, I think the two best innovations to clean an AR has been the Bore Snake and these TAPCO Cleaning Stars. I wish I had them back in the day. I use them now though. You have a excellent cleaning kit. Check out the TAPCO Cleaning Stars, http://www.tapco.com/proddesc.aspx?Id=CLN092020PACK, they work pretty good. I use one soaked with Break Free to soak the area first. Let it sit and then use a bore brush, then come back with another soaked cleaning star then a couple dry ones until I don't see anymore carbon. I'm a bit anal about that area because back in the day it was always the spot whomever was inspecting our weapons went to to give you a gig. Old habits are hard to break. :D
-
You are sure are right about Bore Snakes. If there ever was a lazy mans tool. I have seen the chamber stars but i have not tried them yet. They do look like the way to go. It seams like if i am not cleaning a firearm i am loading up ammo for one.
Mike
-
So I went by their booth and talked to some folks the day after the secret invite meeting. Some guys
get to go to secret meetings and others don't. I liked the look of the tool, but it does have some gerber flavor to it. First of all bottle openers are very important. You can not have a good tool without one.
the gerber thing aside, I liked the size of the blades and especially the really long bits. You don't usually need them, but when you do it is great to have them. Some of the parts like the brash scraper are designed to be replaceable, but I don't know how long they will last before they are totally trashed. I think maybe a good soft steel might have been a better choice than brass.The hammer thing is cool. I use the side of my wave jaws all the time as hammer. I don't like how far it sticks out though even though its obviously necessary to work with the zip tie cutter.
all in all, I think the price kicks my butt although I though the retail was $160, but you know bob and grant are so much smarter than the rest of us. I think it will be really hard to hit the right market for it, but I hope it lasts long enough to get some good field testing.
BTW. It does look a skeletool on steriods.
-
oh my dear lord.... I WANT ONE!!!!!!!
-
@trickknife said:
.....Some of the parts like the brash scraper are designed to be replaceable, but I don't know how long they will last before they are totally trashed. I think maybe a good soft steel might have been a better choice than brass......I wondered about the lifespan of the scraper too, but it all depends on which "bronze alloy" they used. If it is an aluminum-bronze alloy like Ampco 18 or a beryllium-copper alloy then I don't think premature wear will be a big problem.
The very fact that they label it "replaceable" though suggests that it is a wear item. :-\
-
How long are the blades?
-
-
Why the 440HC instead of 154CM on the Blade?
-
@1jump2many said:
Why the 440HC instead of 154CM on the Blade?Leatherman specifically addressed this point by saying that 440 was selected because it was easier to be user-sharpened in the field.
-
I use a flattened brass shell casing and they last a long time i don't think wear will be a problem.
Mike
-
I don't know about working around firearms, but one reason they may have chosen brass is because it is non-sparking, so it won't set anything off. It is used as the grinding media in black powder ball mills for that very reason.
-
The scraper is to scrape carbon build up from the bolt. You want the medal on the scraper to be softer than the bolt so you wont damage it. Hope i explained it good.
Mike
-
Why the 440HC instead of 154CM on the Blade?
Leatherman specifically addressed this point by saying that 440 was selected because it was easier to be user-sharpened in the field.
Thats exactly what I was going to say and just shows Leatherman has its finger on the pulse .While 154CM is a great blade steel most soldeirs wouldnt give a toss and may even think its crap metal because they can't get an edge on it with a pocket stone .Plus the blades will get abused like you wouldn't believe and 154 would just be an overkill.
Dunc
-
you can bet you will get more premium steels on civilian issues of the tool, since leatherman know we will pay more for a fancy name on the knife, regardless of whether we actually need it or not. As it is, in the military they seem to have the sense, or require the sense, to judge what is suitable for when they are out in the field.
-
Just for the heck of it here is a link for the USGI 1969 M16 A1 Comic Book Manual. http://143evac.bizhosting.com/m16comic.html
Mike
-
I'm curious to know what their definition of "the field" is? It's not like troops are going to stop in the middle of a fire fight or on a patrol to clean their weapon. I know that was the teething history of the M16 in Vietnam but that hasn't been an issue in decades. Even when I was in, during the 80's and 90's, cleaning weapons, sharpening knives was done when you were back in an area where the odds of needing them immediately were low. For instance today, troops aren't going to stop in the middle of a patrol in Iraq or Afghanistan to clean weapons or sharpen knives. They will do that when they get back to their base camps or forward operating bases. Sharpening knives can be a time killer when you are bored.
-
I guess it depends on where you are deployed and for how long, and in what conditions.
-
I can see this creature spawning other variants . The "hammer " pommel will play well on other models , replaceable task specific implements , and long drivers will play well with lots of users . I can see an EMT and Fire version , not to mention a Police version .
Chris
-
@Styerman said:
I can see this creature spawning other variants . The "hammer " pommel will play well on other models , replaceable task specific implements , and long drivers will play well with lots of users . I can see an EMT and Fire version , not to mention a Police version . I think I will get one , first Leatherman product that I have been exited about in a long time .Chris
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
