Leatherman MUT?
-
Why the 440HC instead of 154CM on the Blade?
-
@1jump2many said:
Why the 440HC instead of 154CM on the Blade?Leatherman specifically addressed this point by saying that 440 was selected because it was easier to be user-sharpened in the field.
-
I use a flattened brass shell casing and they last a long time i don't think wear will be a problem.
Mike
-
I don't know about working around firearms, but one reason they may have chosen brass is because it is non-sparking, so it won't set anything off. It is used as the grinding media in black powder ball mills for that very reason.
-
The scraper is to scrape carbon build up from the bolt. You want the medal on the scraper to be softer than the bolt so you wont damage it. Hope i explained it good.
Mike
-
Why the 440HC instead of 154CM on the Blade?
Leatherman specifically addressed this point by saying that 440 was selected because it was easier to be user-sharpened in the field.
Thats exactly what I was going to say and just shows Leatherman has its finger on the pulse .While 154CM is a great blade steel most soldeirs wouldnt give a toss and may even think its crap metal because they can't get an edge on it with a pocket stone .Plus the blades will get abused like you wouldn't believe and 154 would just be an overkill.
Dunc
-
you can bet you will get more premium steels on civilian issues of the tool, since leatherman know we will pay more for a fancy name on the knife, regardless of whether we actually need it or not. As it is, in the military they seem to have the sense, or require the sense, to judge what is suitable for when they are out in the field.
-
Just for the heck of it here is a link for the USGI 1969 M16 A1 Comic Book Manual. http://143evac.bizhosting.com/m16comic.html
Mike
-
I'm curious to know what their definition of "the field" is? It's not like troops are going to stop in the middle of a fire fight or on a patrol to clean their weapon. I know that was the teething history of the M16 in Vietnam but that hasn't been an issue in decades. Even when I was in, during the 80's and 90's, cleaning weapons, sharpening knives was done when you were back in an area where the odds of needing them immediately were low. For instance today, troops aren't going to stop in the middle of a patrol in Iraq or Afghanistan to clean weapons or sharpen knives. They will do that when they get back to their base camps or forward operating bases. Sharpening knives can be a time killer when you are bored.
-
I guess it depends on where you are deployed and for how long, and in what conditions.
-
I can see this creature spawning other variants . The "hammer " pommel will play well on other models , replaceable task specific implements , and long drivers will play well with lots of users . I can see an EMT and Fire version , not to mention a Police version .
Chris
-
@Styerman said:
I can see this creature spawning other variants . The "hammer " pommel will play well on other models , replaceable task specific implements , and long drivers will play well with lots of users . I can see an EMT and Fire version , not to mention a Police version . I think I will get one , first Leatherman product that I have been exited about in a long time .Chris
Chris
-
@1jump2many said:
I'm curious to know what their definition of "the field" is? It's not like troops are going to stop in the middle of a fire fight or on a patrol to clean their weapon. I know that was the teething history of the M16 in Vietnam but that hasn't been an issue in decades. Even when I was in, during the 80's and 90's, cleaning weapons, sharpening knives was done when you were back in an area where the odds of needing them immediately were low. For instance today, troops aren't going to stop in the middle of a patrol in Iraq or Afghanistan to clean weapons or sharpen knives. They will do that when they get back to their base camps or forward operating bases. Sharpening knives can be a time killer when you are bored.Yes, no, maybe and sideways. Some of the intended functions are to augment a cleaning kit, while others are to allow soldiers to clean the weapon when they are away from basecamp, such as on an extended deployment (visiting another basecamp, or other transportation/escort/patrol duties). The ejector is for when poo hits the fan and a shell gets jammed and you need a solid hunk of pry tool to eject it rather than wait until you have time to properly service your rifle.
Def
-
How does the clip feel? It appears cast and engineered to span the bit release area. I like how it integrates into the frame. Is it springy?
-
No, it's pretty solid. With the military in mind you want to avoid easily broken or warped things with springs and make things as solid as possible. The clip is indeed cast, and probably has more metal in it than many other entire tools on the market!
Def
-
@Grant Lamontagne said:
No, it's pretty solid. With the military in mind you want to avoid easily broken or warped things with springs and make things as solid as possible. The clip is indeed cast, and probably has more metal in it than many other entire tools on the market!Def
Gotcha. It looks like it can be taken off with a standard philips if you won't be needing the clip and don't want the extra weight.
-
@1jump2many said:
I'm curious to know what their definition of "the field" is? It's not like troops are going to stop in the middle of a fire fight or on a patrol to clean their weapon. I know that was the teething history of the M16 in Vietnam but that hasn't been an issue in decades. Even when I was in, during the 80's and 90's, cleaning weapons, sharpening knives was done when you were back in an area where the odds of needing them immediately were low. For instance today, troops aren't going to stop in the middle of a patrol in Iraq or Afghanistan to clean weapons or sharpen knives. They will do that when they get back to their base camps or forward operating bases. Sharpening knives can be a time killer when you are bored.It all depends on what kind of shooting i am doing. If i am target shooting at a range some between 20 and 30 rounds fired accuracy starts to suffer i pull my Bore Snake a few times and all is good again. Sometimes we go plinking in the National Forest and we will go though a lot of rounds the bolt will dry out and start to stick. Give the bolt a quick wipe down and re oil it and you are up and running again. The AR platform is pretty trouble free it just requires a lot more maintenance compared to a AK47 or SKS.
Mike
-
I'm curious to know what their definition of "the field" is? It's not like troops are going to stop in the middle of a fire fight or on a patrol to clean their weapon. I know that was the teething history of the M16 in Vietnam but that hasn't been an issue in decades. Even when I was in, during the 80's and 90's, cleaning weapons, sharpening knives was done when you were back in an area where the odds of needing them immediately were low. For instance today, troops aren't going to stop in the middle of a patrol in Iraq or Afghanistan to clean weapons or sharpen knives. They will do that when they get back to their base camps or forward operating bases. Sharpening knives can be a time killer when you are bored.
It all depends on what kind of shooting i am doing. If i am target shooting at a range some between 20 and 30 rounds fired accuracy starts to suffer i pull my Bore Snake a few times and all is good again. Sometimes we go plinking in the National Forest and we will go though a lot of rounds the bolt will dry out and start to stick. Give the bolt a quick wipe down and re oil it and you are up and running again. The AR platform is pretty trouble free it just requires a lot maintenance compared to a AK47 or SKS. One other scenario would be if you got mud or snow in the barrel you would need to clear it.
Mike
-
@Mike 56 said:
It all depends on what kind of shooting i am doing. If i am target shooting at a range some between 20 and 30 rounds fired accuracy starts to suffer i pull my Bore Snake a few times and all is good again. Sometimes we go plinking in the National Forest and we will go though a lot of rounds the bolt will dry out and start to stick. Give the bolt a quick wipe down and re oil it and you are up and running again. The AR platform is pretty trouble free it just requires a lot more maintenance compared to a AK47 or SKS.Mike
I completely understand, I actually own both. A Rock River Elite CAR A4 and a Interarms Polish Tantal which is the AK-74 variant, not 47, but same setup just different round size. 5.45 compared to 7.62.
I was in the Army for over 8 years and Airborne. Don't get me wrong, I'm not claiming to be Rambo. But we rucked EVERYTHING and I do mean EVERYTHING. So, a cleaning kit was a must. My first unit we carried the full M16A1 with a standard stock and it had a place in the stock to put your cleaning kit in. The retractable stocks obviously don't have them. I just know from experience that no one is going to stop in the middle of a patrol and start cleaning their weapon. That is why I wondered what Leatherman's idea of "in the field" was. Dislodging a jam is the only maintenance that is going to get performed when you are not back in a "safe" area. The word "safe" doesn't mean back in the US, but a more secured area.
Probably the biggest advantage of this MT for troops is that it is a dual use item. Most troops carry an MT so it covers that and it can compliment their cleaning kits.
-
@Grant Lamontagne said:
No, it's pretty solid. With the military in mind you want to avoid easily broken or warped things with springs and make things as solid as possible. The clip is indeed cast, and probably has more metal in it than many other entire tools on the market!Def
The clip is some kind of casting. I think it's titanium. That probably jacked the price way up. They should have done something a little more simple like stamped titanium or even a wire one. If I was gonna design a multitool, I'd want to try to keep the cost down. >:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login