Review: Surge vs Charge ALX vs New Wave
-
Committing some thread necromancy, but I couldn't find this info anywhere else. So, according to Mr. Whippy:
@Mr. Whippy said:
The Surge is thicker than the Wave, but not so much compared to the Charge:
Surge Charge WaveHow much thicker are the various Charge models (TTi and AL at least) compared to the Wave? The increased thickness is the main reason my TTi usually stays at home in favor of a Spirit. Would a Wave or an AL be anywhere near the Spirit's thickness?
-
To be honest I'd never noticed they were different!
I'll have a look in a bit

-
As a Surge user, I have to agree with your assessment Mr. Whippy. I carried my Surge here on the ranch for at least 5 months and the thing is an incredibly tough and versatile tool. I've recently gotten tired of its complexity though. It drives me bananas that the saw and file aren't both attached to the tool, not to mention they're quite short. Rather than drag around a sheath full of saws, files, and screw driver bits, I've been EDCing a Blast. I'd rather have simplicity over durability I guess.
I also detest the mini bit driver. I even use the thing from time to time, but I'd much rather have an awl or something else.
-
The Surge is too heavy and large for me to belt carry so it never leaves home. It sits on a lamp table, awaiting assignment when I don't feel like getting out of the easy chair to fetch a single purpose tool.
The pliers handles are too far apart to hold comfortably. The Surge frame has sharp edges and corners which were uncomfortable in my palm until I filed them down slightly.
I can open the serrated blade with one hand, but the main blade requires too much force to open in the same way. Perhaps it would ease up after repeated use.
I bought it during a clearance sale so it was a fair value, but I wouldn't purchase another Surge.
Never owned a Wave or Charge and I'd like to try one someday.
-
I love my SURGE! :D
Also, I just wanted to say I found a new use for the "useless little driver". My new Ortovox D3 has a swappable wrist strap instead of the harness (for recovery I assume). And to swap them, you need to pry out a little wedge that holds it together. Well, the only thing I have that works turned out to be the SURGE! mini driver.

-
To be honest I'd never noticed they were different!
I'll have a look in a bit

Well?
:DPS: Thanks mate.
Ooh sorry - totally forgot!
OK - The widest point on the Wave is the top torx fasteners, and I get that to be 18mm.
The Charge TTi is 20.5mm, and the AL is 22mm (again, including the torx fasteners / knurled screw heads).
Not a huge difference, but a difference none the less.
-
That's interesting. So the Wave is slimmer than the Charges but still a bit wider than a Spirit (around 16mm-16.5mm iirc). The difference is very small so perhaps I should give a Wave a try someday. Thanks mate.

-
No problem Nikos

As I said before, I've never noticed the differences until this thread, but they are definitely there!
The TTi is 5 grams lighter than the Wave though!
-
I just ordered a Charge ALX. I think the small bit driver is a bit unnecessary, and I will be modding my charge to include scissors. I would much rather have an awl.
-
i have to admit that i like having the small bit driver, and i am in fact glad that they made it a bit rather than a small fixed driver. aside from the standard uses, it makes an adequate lockpick >:D. i have actually broken a few of the bits this way...

-
Nice comparison.
I like my alx. I don't need scissors with two knives and a guthook. The Surge is too heavy.
I like the extra driver on the ALX then I don't really need to carry the bit-kit. I agree I haven't used the small eye glass
screwdriver much. To be totally honest if it weren't for the drivers on a multi-tool I probably wouldn't carry
them much at all because I always have a knife handy in pocket and it's a bit rarer for me to have a need for
pliers. Often I find a good SAK fits the bill a bit better than even my ALX.
Thanks for the review. :) -
@Sean said:
Nice comparison.
I like my alx. I don't need scissors with two knives and a guthook. The Surge is too heavy.
I like the extra driver on the ALX then I don't really need to carry the bit-kit. I agree I haven't used the small eye glass
screwdriver much. To be totally honest if it weren't for the drivers on a multi-tool I probably wouldn't carry
them much at all because I always have a knife handy in pocket and it's a bit rarer for me to have a need for
pliers. Often I find a good SAK fits the bill a bit better than even my ALX.
Thanks for the review. :)All in all I miss my charge, but I would go for an AL instead of the ALX. I just use the scissors too darn much to lose them. I think I will spring for another charge sometime soon.
-
do what i do to get everything you could ever possibly need:
charge alx in a sheath on my belt
juice s2 on my keysbesides you never know when you will need 2 pairs of pliers...
-
Well with all the differences of opinions it should be secure us a variety of tools from the manufacturers
for years to come. :D -
Mr. Whippy , I hear you on the surge being a letdown , I felt the same when I got mine and quickly gave it away . Good review !
Chris
-
Your thoughts mirror my own on the Surge , no to say it isn't a fine tool . I don't care much for the ALX family , I feel that if you wan't an upgrade from the Wave , pony up for a Charge and be done with it . The Wave is probably the most cost effective of the trio .
Excellent review !
Chis
-
I am using the Surge as my EDC and lately (temporarily) I am also carrying the Supertool 300.
I find the bigger tool better for heavy jobs and the pliers are stronger.
The scissors is a must on a multitool (unless you carry the Micra with you as well). The scissors on the Surge is bigger and stronger than the one on the Wave.
I agree with the fact that I would have liked the Saw and File simultaneously on the tool. However I now also carry two Bosch steel cutting jigsaw blades as it also fit into the blade changer and this is so nice. I can now also cut a nail of or something hard in that moment of need where nothing else is available.
The small screw driver that seems to be useless: I use mine regularly. I use it for my spectacle's nose rest, to remove it for deep cleaning purposes or replacement. I use it regularly to undo cable ties and use it again. I am a police officer and the big handcuff cable ties are expensive so I re-use it a couple of times. Recently I had to remove a broken front part of a vehicle's boot key from the lock. I used the small bit in the process. When I installed (re-installed) irrigation last week (Hunter pop-ups), I used the small driver to remove filth from the jet screw (which is in fact a stainless grub screw, head-less). For this little bit I have plenty of use.
The Surge also features bigger blades than the smaller tools. This comes in handy with the serrated blade as I use this regularly to cut straps and nylon pipes.
I own both the Wave and the Surge and my preferences go towards the bigger tools. Weight is no factor for me as I am use a pockits pouch and I carry the following in there:
Surge
Led Lenzer P5 flashlight
Wengers SAK
Leatherman Universal tool adapter
Surge pouch with saw blade + 2 X Bosch blades
Leatherman bit kit (both bit cards - full)
A handmade drill / awl
two pens.With this setup I can do a lot.
I agree the Wave / Charge can do the same, as I have seen there are hacksaw blades that were grounded to be fitted to the clip's slot.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login