Best Multi-tool ???
-
While all my pliers based multi's are Leatherman I'm not sure they are particularly better than all the others, just so long as you stick to the brands discussed here on the forum you're not likely to go wrong. Have a good read through the review forum
http://forum.multitool.org/index.php/board,5.0.html
and the main site.
http://www.multitool.org/I'd always think about what features/tools are actually going to be important to you day-to-day. Do you need scissors, saw, hook, scraper, file, ruler, etc? Or could you manage without? If you end up with something to big and bulky you might be less inclined to carry it.
As to the cost of Leathermans I'd agree that they're very pricey here. have a a look at some of our banner advertisers, they all post overseas and it can save you a good few quid even if you do get hit for customs costs.

-
You really can't go far wrong with any of the big brands :)
I'd plump for a Swisstool though :)
-
I agree with Gareth, sometimes you don't need a saw and a guthook or even a file(blasphemy, I know!). Think about what you are going to use the tool for and then pick based on that. I must disagree with some on here by saying that you really should look at LM, Vic, and SOG only at first. Those three are hard to go wrong with. LM has a few quality control issues, but if you get a good one, it will last forever. Vic has no quality issues, they are awesome all around, they just don't have that awesome bit driver that my LM wave has. I have never owned a SOG, but I have also never heard a bad review of one. Gerbers I can tell you are junk. Their tools are WAAAY too small and they don't really work for anything. Even my wife thought the tools on the gerber suspension were too small. My vote goes to LM for now. Go with a wave or even just a blast, you will love it.
-
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)
-
@Gareth said:
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)I have not had the pleasure of handling a MP600 or 400, so it would appear that I spoke a little out of turn with my blanket gerber statement. I have checked out an Octane online and it looks pretty cool.
-
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)
I have not had the pleasure of handling a MP600 or 400, so it would appear that I spoke a little out of turn with my blanket gerber statement. I have checked out an Octane online and it looks pretty cool.
I don't own a gerber myself, but I think there are a lot of sacrifices for the OHO feature. In terms of one handed design, butterflies can be opened one handed generally but it isn't too comfortable nor safe sometimes. I like SOGs "OHO" better than Gerber. I can't stop playing with it! :D
Of course one-handed isn't necessary for everyone but it helps to make things easier(along with outside tools)
-
Leatherman and Vic are the two front runners , in no particular order . Depends on what features you need or want . Like most of us , you will probably end up with more than one .
FWIW , for my use , I prefer the Vic Spirit , high implement quality and density , great build quality , nice ergos . as always YMMV .
Chris
-
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)
I have not had the pleasure of handling a MP600 or 400, so it would appear that I spoke a little out of turn with my blanket gerber statement. I have checked out an Octane online and it looks pretty cool.
If your only experience of Gerber is the Suspension then I totally understand why you have a low opinion of them. :D It is a pile of poo IMO.
One thing I like about Gerber is that they seem to listen to us here on the forum. Grant recently pointed out the the reason the Octane has a proper Phillips driver is because, almost to a man, we hated the flat one.
Now I'm a huge Victorinox fan but I do wish they'd listen to me ;). Just in case they are listening, PLEASE stop making a Phillips driver, almost all of Europe uses a Pozidriv screw these days and you Phillips doesn't fit them properly.
:D
-
+10 on a Robertson. :D
-
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)
I have not had the pleasure of handling a MP600 or 400, so it would appear that I spoke a little out of turn with my blanket gerber statement. I have checked out an Octane online and it looks pretty cool.
If your only experience of Gerber is the Suspension then I totally understand why you have a low opinion of them. :D It is a pile of poo IMO.
One thing I like about Gerber is that they seem to listen to us here on the forum. Grant recently pointed out the the reason the Octane has a proper Phillips driver is because, almost to a man, we hated the flat one.
Now I'm a huge Victorinox fan but I do wish they'd listen to me ;). Just in case they are listening, PLEASE stop making a Phillips driver, almost all of Europe uses a Pozidriv screw these days and you Phillips doesn't fit them properly.
:D
I actually had a Multiplier when I was younger, but I don't remember the model. What I do remember is many, many blood blisters. And a couple broken tools. My dad seems to like Gerber, and I would love to try an Octane. I am kinda stuck on LM again though, I love the bit drivers.
IDK about the pozidrive...
I live in the states as you all know, and we like the phillips :DI do wish that Vic and LM would go the way of SOG and allow custom loadouts. That way many of us could have the same model Vic, except mine has phillips, gareths has pozidrive, and chako gets his robertson.
-
Actually, gillm, if budget is a big factor for you then you might want to share with us how much you can spend on a MT and what you are going to use it for.. that way, the kind folks over here can help you come to a good (I hope :D ) decision as to which tool to get.

-
@andre0407 said:
Actually, gillm, if budget is a big factor for you then you might want to share with us how much you can spend on a MT and what you are going to use it for.. that way, the kind folks over here can help you come to a good (I hope :D ) decision as to which tool to get.
MT budget!
GOOD ONE! 
-
Actually, gillm, if budget is a big factor for you then you might want to share with us how much you can spend on a MT and what you are going to use it for.. that way, the kind folks over here can help you come to a good (I hope :D ) decision as to which tool to get.

MT budget!
GOOD ONE! 
:D It does seem that when a new Multi or SAK is on the line, money comes outta nowhere.
-
The first question should be Plier bases multi , or SAK . On my multi's the least often used tool is the pliers . You might be able to get away with a Vic Huntsman or climber for a fraction of the price or weight .
Chris
-
While I confess an Anti Gerber bias , this is a straight observation . Their one hand plier designs waste a lot of space , and result in short implements , and thick hand pinching profiles . Don't buy one unless you are sure it's one of their few good offerings , and handle one if possible to be sure it's your cup of tea . Tho better and more functional than Gerber , SOG just seems crude , and not ready for prime time . Their + factor is that you can customize the implement loadout , I just don't care for their implements .
I think Leatherman Wave or Vic. Spirit would be a good starting point for you . Both good tools .
Chris
-
@Styerman said:
While I confess an Anti Gerber bias , this is a straight observation . Their one hand plier designs waste a lot of space , and result in short implements , and thick hand pinching profiles . Don't buy one unless you are sure it's one of their few good offerings , and handle one if possible to be sure it's your cup of tea . Tho better and more functional than Gerber , SOG just seems crude , and not ready for prime time . Their + factor is that you can customize the implement loadout , I just don't care for their implements .I think Leatherman Wave or Vic. Spirit would be a good starting point for you . Both good tools .
Chris
After owning both, I must agree that they are two of the best. -
Welcome,
now im not biased but i would go for a leatherman wave :D you wont be disappointed,

paul
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login