Best Multi-tool ???
-
Leatherman and Vic are the two front runners , in no particular order . Depends on what features you need or want . Like most of us , you will probably end up with more than one .
FWIW , for my use , I prefer the Vic Spirit , high implement quality and density , great build quality , nice ergos . as always YMMV .
Chris
-
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)
I have not had the pleasure of handling a MP600 or 400, so it would appear that I spoke a little out of turn with my blanket gerber statement. I have checked out an Octane online and it looks pretty cool.
If your only experience of Gerber is the Suspension then I totally understand why you have a low opinion of them. :D It is a pile of poo IMO.
One thing I like about Gerber is that they seem to listen to us here on the forum. Grant recently pointed out the the reason the Octane has a proper Phillips driver is because, almost to a man, we hated the flat one.
Now I'm a huge Victorinox fan but I do wish they'd listen to me ;). Just in case they are listening, PLEASE stop making a Phillips driver, almost all of Europe uses a Pozidriv screw these days and you Phillips doesn't fit them properly.
:D
-
+10 on a Robertson. :D
-
While I totally agree that the Suspension is pretty ropey, at best, I wouldn't write all Gerber's off because of it. Plenty enough fans of the Multi Plier 600 and 400 here on the forum. Gerber aren't everyone's cut of tea but I think they have done enough quality tools to have earned their own section on the forum. :)
I have not had the pleasure of handling a MP600 or 400, so it would appear that I spoke a little out of turn with my blanket gerber statement. I have checked out an Octane online and it looks pretty cool.
If your only experience of Gerber is the Suspension then I totally understand why you have a low opinion of them. :D It is a pile of poo IMO.
One thing I like about Gerber is that they seem to listen to us here on the forum. Grant recently pointed out the the reason the Octane has a proper Phillips driver is because, almost to a man, we hated the flat one.
Now I'm a huge Victorinox fan but I do wish they'd listen to me ;). Just in case they are listening, PLEASE stop making a Phillips driver, almost all of Europe uses a Pozidriv screw these days and you Phillips doesn't fit them properly.
:D
I actually had a Multiplier when I was younger, but I don't remember the model. What I do remember is many, many blood blisters. And a couple broken tools. My dad seems to like Gerber, and I would love to try an Octane. I am kinda stuck on LM again though, I love the bit drivers.
IDK about the pozidrive...
I live in the states as you all know, and we like the phillips :DI do wish that Vic and LM would go the way of SOG and allow custom loadouts. That way many of us could have the same model Vic, except mine has phillips, gareths has pozidrive, and chako gets his robertson.
-
Actually, gillm, if budget is a big factor for you then you might want to share with us how much you can spend on a MT and what you are going to use it for.. that way, the kind folks over here can help you come to a good (I hope :D ) decision as to which tool to get.

-
@andre0407 said:
Actually, gillm, if budget is a big factor for you then you might want to share with us how much you can spend on a MT and what you are going to use it for.. that way, the kind folks over here can help you come to a good (I hope :D ) decision as to which tool to get.
MT budget!
GOOD ONE! 
-
Actually, gillm, if budget is a big factor for you then you might want to share with us how much you can spend on a MT and what you are going to use it for.. that way, the kind folks over here can help you come to a good (I hope :D ) decision as to which tool to get.

MT budget!
GOOD ONE! 
:D It does seem that when a new Multi or SAK is on the line, money comes outta nowhere.
-
The first question should be Plier bases multi , or SAK . On my multi's the least often used tool is the pliers . You might be able to get away with a Vic Huntsman or climber for a fraction of the price or weight .
Chris
-
While I confess an Anti Gerber bias , this is a straight observation . Their one hand plier designs waste a lot of space , and result in short implements , and thick hand pinching profiles . Don't buy one unless you are sure it's one of their few good offerings , and handle one if possible to be sure it's your cup of tea . Tho better and more functional than Gerber , SOG just seems crude , and not ready for prime time . Their + factor is that you can customize the implement loadout , I just don't care for their implements .
I think Leatherman Wave or Vic. Spirit would be a good starting point for you . Both good tools .
Chris
-
@Styerman said:
While I confess an Anti Gerber bias , this is a straight observation . Their one hand plier designs waste a lot of space , and result in short implements , and thick hand pinching profiles . Don't buy one unless you are sure it's one of their few good offerings , and handle one if possible to be sure it's your cup of tea . Tho better and more functional than Gerber , SOG just seems crude , and not ready for prime time . Their + factor is that you can customize the implement loadout , I just don't care for their implements .I think Leatherman Wave or Vic. Spirit would be a good starting point for you . Both good tools .
Chris
After owning both, I must agree that they are two of the best. -
Welcome,
now im not biased but i would go for a leatherman wave :D you wont be disappointed,

paul
-
-
SURGE!
-
Welcome,
now im not biased but i would go for a leatherman wave :D you wont be disappointed,

paul

Sorry Paul. :D
:D i cant help myself gareth :ahhh
I gotta say that if I wasn't left handed I'd give the Wave a lot more consideration than I ever have. As it is though there's not much point in looking at OHO tools when they only work for my off hand. :-\
-
Welcome,
now im not biased but i would go for a leatherman wave :D you wont be disappointed,

paul

Sorry Paul. :D
:D i cant help myself gareth :ahhh
I gotta say that if I wasn't left handed I'd give the Wave a lot more consideration than I ever have. As it is though there's not much point in looking at OHO tools when they only work for my off hand. :-\
yeah its a shame they dont do a L hand version ,
-
Seems to a a lot of anti Gerber BS going on in this thread. I have carried a Gerber 600 bluntnose for close to 10 years. Even though I own tools from all the major brands the 600 is still my most carried MT. And the only one I trust comepletely.
-
Is there no love for the Paul
cheapChen multitasker? it has man sized scissors
:D -
From what I gathered you are looking for a plier based MT.

I have been thru several different MTs (maybe not as many as some people here
) I started out with a Gerber (600 series) which
got traded into a Leatherman PST which got traded in for a Leatherman Super Tool.The original Gerber had a bad habit of pinching you (which they fixed since then).
I swore by Swiss Tool for the longest time 10+ years until I tried a Spirit. Then one day I came across a deal I couldn't pass up
and got a Leatherman Wave.Now the Wave sets in the box and I carry the ST 300.
I said all of that to say this. No one here can tell you what your perfect MT is (we don't even know what ours is) :ahhh
You just have to figure out what you are looking for and what is legal and illegal and go from there.
If it makes you happy and does what it needs to do then it is perfect (at that moment) because your taste and situation will change.
My advice to you is keep your money and sanity and what you do don't talk to a man named Grant / Def (he is a major problem here) ::)
There is a lot of people that blame him for their addictions (me included).
GETS WHAT MAKES YOU HAPPY AND YOU CAN'T GO WRONG.
-
@WH867 said:
Seems to a a lot of anti Gerber BS going on in this thread. I have carried a Gerber 600 bluntnose for close to 10 years. Even though I own tools from all the major brands the 600 is still my most carried MT. And the only one I trust comepletely.By any chance do you live in Albany, NY and work at the lodge in Dick's sporting goods?
...I ask because the guy at Dick's said almost the exact same thing

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login