Recommend me a multitool for.....
-
One more vote for the Paladin series tools, specifically Paladin PT-540 that WH 867 recommended.

-
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.
-
@Magnus said:
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.I don't agree that SOGs pliers are any stronger than their competitors tbh, I think it;s a bit of a myth. In fact, I'd say that the Leatherman Surge, Core and especially the Supertool 300, if thickness of steel is an indicator, look much stronger. The SOGs have more cutting "power" due to the compound leverage, but no additional strength I don't think.
Also, the 1/4" hex bit adapter is an optional extra isn't it? I could be wrong. Leatherman has this too, but based on the op's list of must have features, I'd have thought the Phillips on the Blast fits the bill a bit better for his purposes.
There is a wire stripper "V" cutter included on the can opener on the Blast also, although I grant you if you want the full, gauged wire strippers then you'll be needing a SOG, Paladin, Bear EL155, or even a Leatherman Squirt. My feeling though would be that anyone engaged in stripping wires regularly would mange perfectly well with the Blast - hell, even I can us it!
-
I think Dave is right in re SOG , compound leverage just makes them easier and more comfortable to break . Some Pic's of a set up that might do it for you . The black folding Gadget is a Kline folding 10 in one driver ( called the 10 fold ) it's got a lot of options in a small package , the SAK is a Ranger . The two pairs of dedicated needle nose pliers are by Kline , with the "Journeyman " style grips , the larger of the two has a stripping notch . 7 9/16" , the smaller pliers are also very strong , and chek in a 7" overall .
Those three items will do a good deal of what you require , and will take a beating .
Ideal makes a black Latigo pouch ( tuff as hell ) that would contain the pliers a utility knife , pen/pencils and a small lite . You could wear it comfortably all day . The SAK and 10 fold would fir in either nylon pouches or pockets .
Chris

-
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.
I don't agree that SOGs pliers are any stronger than their competitors tbh, I think it;s a bit of a myth. In fact, I'd say that the Leatherman Surge, Core and especially the Supertool 300, if thickness of steel is an indicator, look much stronger. The SOGs have more cutting "power" due to the compound leverage, but no additional strength I don't think.
Also, the 1/4" hex bit adapter is an optional extra isn't it? I could be wrong. Leatherman has this too, but based on the op's list of must have features, I'd have thought the Phillips on the Blast fits the bill a bit better for his purposes.
well, the standard PT-540 sheath has a space to hold it, and it comes with it, so it isn't really optional, no idea about other SOGs.
@DaveK said:
There is a wire stripper "V" cutter included on the can opener on the Blast also, although I grant you if you want the full, gauged wire strippers then you'll be needing a SOG, Paladin, Bear EL155, or even a Leatherman Squirt. My feeling though would be that anyone engaged in stripping wires regularly would mange perfectly well with the Blast - hell, even I can us it!personally, I have never really got on with those silly V strippers, they take far too long to use. the strippers in the head of the PT-540 work well for thick gauge wire, and it has a cable stripper where most SOGs have a crimper, but even it needs the wire stripper component added for other wire.
-
I'll throw in my vote for the Paladins. Real heavy duty stuff and great for electricians and other such wire workers.
Since abusing drivers is a must, I am not sure the LM bits can take it. Paladins and sogs have the 1/4" adapter if you are OK with carrying extra bits.
-
@Kmarr said:
I'll throw in my vote for the Paladins. Real heavy duty stuff and great for electricians and other such wire workers.Since abusing drivers is a must, I am not sure the LM bits can take it. Paladins and sogs have the 1/4" adapter if you are OK with carrying extra bits.
the leatherman bits are make from quite a tough hard steel i think, there more likely to kill the screw then the bit, the only thing is the black scratches off them
-
I'll throw in my vote for the Paladins. Real heavy duty stuff and great for electricians and other such wire workers.
Since abusing drivers is a must, I am not sure the LM bits can take it. Paladins and sogs have the 1/4" adapter if you are OK with carrying extra bits.
the leatherman bits are make from quite a tough hard steel i think, there more likely to kill the screw then the bit, the only thing is the black scratches off them
most decent quality bits are.
-
@Magnus said:
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.Ok yeah, I'm dealing with air conditioners and thermostats usually, EASY stuff. So definitely thin wires nothing heavy.
Again, the paladins look really nice if I was an electrician I would use it. But I'm just general maintenance though a lot of it is electrical I still don't need anything heavy, or with 30 tools.
As far as SOGS which models have the wire stripper, and takes normal hex bits. I'm sure I wouldn't wear out anything without hex bits, but I got a budget for any multi-tool I want, and call me crazy but I'm only buying one. At least for the next few months, got a bunch of other expenses.
-
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.
Ok yeah, I'm dealing with air conditioners and thermostats usually, EASY stuff. So definitely thin wires nothing heavy.
Again, the paladins look really nice if I was an electrician I would use it. But I'm just general maintenance though a lot of it is electrical I still don't need anything heavy, or with 30 tools.
As far as SOGS which models have the wire stripper, and takes normal hex bits. I'm sure I wouldn't wear out anything without hex bits, but I got a budget for any multi-tool I want, and call me crazy but I'm only buying one. At least for the next few months, got a bunch of other expenses.
surly this would do you a treat ???
Leatherman Super Tool 300:
* 420HC Clip Point Knife with Straight Edge * 420HC Sheepsfoot Serrated Knife * Needlenose Pliers * Regular Pliers * 154CM Removable Wire Cutters * 154CM Removable Hard-wire Cutters * Stranded-wire Cutters * Wire Stripper * Electrical Crimper * 5/16" Screwdriver * 7/32" Screwdriver * 1/8" Screwdriver * Phillips Screwdriver * Wood/Metal File * Saw * Bottle Opener * Can Opener * 9 in | 22 cm Ruler * Awl with Thread LoopFeatures
* Stainless Steel Handles * Stainless Steel Body * Black Oxide Version Available * All Locking Blades and Tools * Comfort-sculpted Handles w/ Cutouts for Access with Gloves On * Leather or Nylon Sheath * 25-year Warranty -
No scissors on the ST300 Paul :)
That's why I suggested the Blast.
-
@DaveK said:
No scissors on the ST300 Paul :)That's why I suggested the Blast.
oops i just noticed the scissor part, then get a wave then :D
leatherman wave
* Needlenose Pliers * Regular Pliers * Wire Cutters * Hard-Wire Cutters * Clip-Point Knife * Serrated Knife * Saw * Scissors * Wood/Metal File * Diamond-Coated File * Large Bit Driver * Small Bit Driver * Large Screwdriver * Ruler (8 inch/19 cm) * Bottle/Can Opener * Wire Stripper * Two Double-Ended Bits -
Thats why I say SUUUUUUUURGE, Its a big wave! and I don't think a wood saw is necessary for AC work :)
-
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.
Ok yeah, I'm dealing with air conditioners and thermostats usually, EASY stuff. So definitely thin wires nothing heavy.
Again, the paladins look really nice if I was an electrician I would use it. But I'm just general maintenance though a lot of it is electrical I still don't need anything heavy, or with 30 tools.
As far as SOGS which models have the wire stripper, and takes normal hex bits. I'm sure I wouldn't wear out anything without hex bits, but I got a budget for any multi-tool I want, and call me crazy but I'm only buying one. At least for the next few months, got a bunch of other expenses.
SOGs are customizable, none come with the wire stripper as standard, however any that say they come with the 1/4 drive will take normal bits.
here is a good video on how easy it is to customize.
http://www.youtube.com/watch?v=yG7vp2Glh8Y -
@Magnus said:
SOGs are customizable, none come with the wire stripper as standard, however any that say they come with the 1/4 drive will take normal bits.Isn't the advertised 1/4" drive actually just a stump, on which you can fit a hex driver? I could well be wrong, but that's what all my SOGs have, meaning you have to then go buy a hex "socket" to fit on it before you can use hex bits. It works perfectly well, and I use is with a socket set (mostly for dismantling LM Micras funnily enough), but it's not the ideal setup if you're atop a ladder for example.
With the Leatherman (with the fixed Phillips) you have that option using the removable bit driver, but of course you have arguably the best Phillips driver on the multitool market ever-ready if faffing with an adapter is a problem.
-
Thats why I say SUUUUUUUURGE, Its a big wave! and I don't think a wood saw is necessary for AC work :)
yeah i agree, strong pliers, good drivers, and scissors :D
we there yet :DI've yet to see the surge, now that I look at it, Wouldn't a Charge Tti be the best offering for Leatherman? Saves me 4 oz's of weight off the surge which is 12.5 oz.
Another option is of course getting 2 multi-tools for $125-$140. If perhaps 2 tools at a light weight would serve more purpose than one bigger heavier tool.
-
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.
I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
-
A wave with the Universal Tool Adaptor - so that you can rock 1/4 " hex might work . The UTA fits easily in the pocket , and will take lots of abuse , can even be used offtool as a stubby . You shouldn't have any trouble handling LVT stripping with the needle nose pliers on a Wave .
Chris
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login