Recommend me a multitool for.....
-
@Magnus said:
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.Ok yeah, I'm dealing with air conditioners and thermostats usually, EASY stuff. So definitely thin wires nothing heavy.
Again, the paladins look really nice if I was an electrician I would use it. But I'm just general maintenance though a lot of it is electrical I still don't need anything heavy, or with 30 tools.
As far as SOGS which models have the wire stripper, and takes normal hex bits. I'm sure I wouldn't wear out anything without hex bits, but I got a budget for any multi-tool I want, and call me crazy but I'm only buying one. At least for the next few months, got a bunch of other expenses.
-
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.
Ok yeah, I'm dealing with air conditioners and thermostats usually, EASY stuff. So definitely thin wires nothing heavy.
Again, the paladins look really nice if I was an electrician I would use it. But I'm just general maintenance though a lot of it is electrical I still don't need anything heavy, or with 30 tools.
As far as SOGS which models have the wire stripper, and takes normal hex bits. I'm sure I wouldn't wear out anything without hex bits, but I got a budget for any multi-tool I want, and call me crazy but I'm only buying one. At least for the next few months, got a bunch of other expenses.
surly this would do you a treat ???
Leatherman Super Tool 300:
* 420HC Clip Point Knife with Straight Edge * 420HC Sheepsfoot Serrated Knife * Needlenose Pliers * Regular Pliers * 154CM Removable Wire Cutters * 154CM Removable Hard-wire Cutters * Stranded-wire Cutters * Wire Stripper * Electrical Crimper * 5/16" Screwdriver * 7/32" Screwdriver * 1/8" Screwdriver * Phillips Screwdriver * Wood/Metal File * Saw * Bottle Opener * Can Opener * 9 in | 22 cm Ruler * Awl with Thread LoopFeatures
* Stainless Steel Handles * Stainless Steel Body * Black Oxide Version Available * All Locking Blades and Tools * Comfort-sculpted Handles w/ Cutouts for Access with Gloves On * Leather or Nylon Sheath * 25-year Warranty -
No scissors on the ST300 Paul :)
That's why I suggested the Blast.
-
@DaveK said:
No scissors on the ST300 Paul :)That's why I suggested the Blast.
oops i just noticed the scissor part, then get a wave then :D
leatherman wave
* Needlenose Pliers * Regular Pliers * Wire Cutters * Hard-Wire Cutters * Clip-Point Knife * Serrated Knife * Saw * Scissors * Wood/Metal File * Diamond-Coated File * Large Bit Driver * Small Bit Driver * Large Screwdriver * Ruler (8 inch/19 cm) * Bottle/Can Opener * Wire Stripper * Two Double-Ended Bits -
Thats why I say SUUUUUUUURGE, Its a big wave! and I don't think a wood saw is necessary for AC work :)
-
the only multitools with wire strippers is SOGs that can take the wire stripper component. The paladin PT-540 also has wire strippers in its head for larger size wire. SOGs also have the most rock solid pliers of any MT, and have a bit driver that takes normal hex bits, so no having to pay for expensive leatherman bits every time you wear one out.
Ok yeah, I'm dealing with air conditioners and thermostats usually, EASY stuff. So definitely thin wires nothing heavy.
Again, the paladins look really nice if I was an electrician I would use it. But I'm just general maintenance though a lot of it is electrical I still don't need anything heavy, or with 30 tools.
As far as SOGS which models have the wire stripper, and takes normal hex bits. I'm sure I wouldn't wear out anything without hex bits, but I got a budget for any multi-tool I want, and call me crazy but I'm only buying one. At least for the next few months, got a bunch of other expenses.
SOGs are customizable, none come with the wire stripper as standard, however any that say they come with the 1/4 drive will take normal bits.
here is a good video on how easy it is to customize.
http://www.youtube.com/watch?v=yG7vp2Glh8Y -
@Magnus said:
SOGs are customizable, none come with the wire stripper as standard, however any that say they come with the 1/4 drive will take normal bits.Isn't the advertised 1/4" drive actually just a stump, on which you can fit a hex driver? I could well be wrong, but that's what all my SOGs have, meaning you have to then go buy a hex "socket" to fit on it before you can use hex bits. It works perfectly well, and I use is with a socket set (mostly for dismantling LM Micras funnily enough), but it's not the ideal setup if you're atop a ladder for example.
With the Leatherman (with the fixed Phillips) you have that option using the removable bit driver, but of course you have arguably the best Phillips driver on the multitool market ever-ready if faffing with an adapter is a problem.
-
Thats why I say SUUUUUUUURGE, Its a big wave! and I don't think a wood saw is necessary for AC work :)
yeah i agree, strong pliers, good drivers, and scissors :D
we there yet :DI've yet to see the surge, now that I look at it, Wouldn't a Charge Tti be the best offering for Leatherman? Saves me 4 oz's of weight off the surge which is 12.5 oz.
Another option is of course getting 2 multi-tools for $125-$140. If perhaps 2 tools at a light weight would serve more purpose than one bigger heavier tool.
-
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.
I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
-
A wave with the Universal Tool Adaptor - so that you can rock 1/4 " hex might work . The UTA fits easily in the pocket , and will take lots of abuse , can even be used offtool as a stubby . You shouldn't have any trouble handling LVT stripping with the needle nose pliers on a Wave .
Chris
-
@DaveK said:
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
Yeah I mean just looking at 12.5 oz's and realizing I carry a knife as well...that's about 18 oz's right there, all of it weighs down the pants.
Yeah two tools might be an option I currently carry my benchmade and I beat the life out of it, never fails and still shaves paper like butter. So when I go to send it in, I'm about to pick up a 2nd benchmade because if it takes half the beating the first one did I'm a life long customer for sure. So I'll probably pick up 2 multitools, one now and one in a month or two.
Yeah I think the way it's looking a spare tool is definitely a good thing, Just looking at the tools at work, it appears they've been dealt a great beating (needles nose pliers bent into ....well more like a Y shape) Clearly I want something durable as all hell.
Seems for now everyone that has posted thus far as almost all nearly leatherman fans. I'll have to see which SOG gets recommended and possibly pick up one from each. Only thing I notice about the SOGs is the fact that they are all a bit heavier than most Leatherman's (charge = 8.3 oz, powerlock is like 9.6 oz) not a big difference.
-
Well I'm a Vic fan but you needed needle nosed pliers :)
Otherwise I'd of recommended a Swisstool :)
-
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.
I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
Yeah I mean just looking at 12.5 oz's and realizing I carry a knife as well...that's about 18 oz's right there, all of it weighs down the pants.
Yeah two tools might be an option I currently carry my benchmade and I beat the life out of it, never fails and still shaves paper like butter. So when I go to send it in, I'm about to pick up a 2nd benchmade because if it takes half the beating the first one did I'm a life long customer for sure. So I'll probably pick up 2 multitools, one now and one in a month or two.
Yeah I think the way it's looking a spare tool is definitely a good thing, Just looking at the tools at work, it appears they've been dealt a great beating (needles nose pliers bent into ....well more like a Y shape) Clearly I want something durable as all hell.
Seems for now everyone that has posted thus far as almost all nearly leatherman fans. I'll have to see which SOG gets recommended and possibly pick up one from each. Only thing I notice about the SOGs is the fact that they are all a bit heavier than most Leatherman's (charge = 8.3 oz, powerlock is like 9.6 oz) not a big difference.
SOG tools do tend to be a bit bigger than the competition. They do make a Charge / Wave sized tool called the Pocket Powerplier (often referred to as the PPP on here), but the tools don't lock which might not be ideal for professional use - I think I'd want something I can trust not to fold up on me in your situation.
-
Looks like it has been narrowed down to Charge TTI or Wave , both great defaults . I've seen a lot of maintenance fellas use them . Locking is a most definate asset .
Chris
-
Damn I'm liking that whole Universal Tool Adapter thing, and it works for the Wave/Charge/Fuse all 3 Leathermans I was looking at! O_O I think we have a winner I'm going with a Leatherman and buying the UTA and bit kits. Should Cost pretty much everything I was looking to spend but I don't see any better options just gotta decide Wave or Charge Tti?
According to Ebay I'm looking at 50-65 bucks for a wave, more like $90-115 or so for the Charge Tti. Should I spring for the Charge TTi or just start off with the wave?
-
The Wave and Charge TTi are pretty much the same tool, but the Charge has Titanium handles and a higher quality steel on the main blade. The titanium is mostly for show, but does hold up a bit better to knocks and scratches, but probably not enough to justify the extra for a work tool.
The other thing to consider is that the Charge comes with a small selection of the flat bits and a detachable pocket clip, whereas the Wave doesn't.
Functionally, they'll both work the same!
-
Hmm now the only question is if I Ebay one how do I know I'm getting the newest model wave?
http://cgi.ebay.com/Leatherman-Wave-Multi-Tool_W0QQitemZ220576050676QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item335b5b6df4 <--- New or old?
http://cgi.ebay.com/Leatherman-Wave_W0QQitemZ170460315393QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27b039ff01 <--New or old?
For now it seems like a good Idea to pick up the wave with UTA and bit kit. If I like it a lot I'll probably pick up a charge in a month or so. Just need to know that I'm not getting cheesed on Ebay with old model waves.
-
Those three links are all New model Waves Bill. Feel free to keep posting and asking - this is the kind of thing we do for fun around here. Yes, it is quite sad :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login