Recommend me a multitool for.....
-
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.
I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
-
A wave with the Universal Tool Adaptor - so that you can rock 1/4 " hex might work . The UTA fits easily in the pocket , and will take lots of abuse , can even be used offtool as a stubby . You shouldn't have any trouble handling LVT stripping with the needle nose pliers on a Wave .
Chris
-
@DaveK said:
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
Yeah I mean just looking at 12.5 oz's and realizing I carry a knife as well...that's about 18 oz's right there, all of it weighs down the pants.
Yeah two tools might be an option I currently carry my benchmade and I beat the life out of it, never fails and still shaves paper like butter. So when I go to send it in, I'm about to pick up a 2nd benchmade because if it takes half the beating the first one did I'm a life long customer for sure. So I'll probably pick up 2 multitools, one now and one in a month or two.
Yeah I think the way it's looking a spare tool is definitely a good thing, Just looking at the tools at work, it appears they've been dealt a great beating (needles nose pliers bent into ....well more like a Y shape) Clearly I want something durable as all hell.
Seems for now everyone that has posted thus far as almost all nearly leatherman fans. I'll have to see which SOG gets recommended and possibly pick up one from each. Only thing I notice about the SOGs is the fact that they are all a bit heavier than most Leatherman's (charge = 8.3 oz, powerlock is like 9.6 oz) not a big difference.
-
Well I'm a Vic fan but you needed needle nosed pliers :)
Otherwise I'd of recommended a Swisstool :)
-
Well, my brain works like yours clearly Bill. I do find the Surge too big and heavy, and the Charge TTi is my tool of choice.
I just have a slight concern that the bit drivers in the Surge, Wave and Charge will take the kind of punishment you appear to be handing out. They are guaranteed for 25 years if they did fail, and if you did go for the two tool option then I guess you'd have some cover whilst a tool was off for repair I guess :)
Two tools might allow you to get a Leatherman and a SOG too, avoid making the decision :D
Yeah I mean just looking at 12.5 oz's and realizing I carry a knife as well...that's about 18 oz's right there, all of it weighs down the pants.
Yeah two tools might be an option I currently carry my benchmade and I beat the life out of it, never fails and still shaves paper like butter. So when I go to send it in, I'm about to pick up a 2nd benchmade because if it takes half the beating the first one did I'm a life long customer for sure. So I'll probably pick up 2 multitools, one now and one in a month or two.
Yeah I think the way it's looking a spare tool is definitely a good thing, Just looking at the tools at work, it appears they've been dealt a great beating (needles nose pliers bent into ....well more like a Y shape) Clearly I want something durable as all hell.
Seems for now everyone that has posted thus far as almost all nearly leatherman fans. I'll have to see which SOG gets recommended and possibly pick up one from each. Only thing I notice about the SOGs is the fact that they are all a bit heavier than most Leatherman's (charge = 8.3 oz, powerlock is like 9.6 oz) not a big difference.
SOG tools do tend to be a bit bigger than the competition. They do make a Charge / Wave sized tool called the Pocket Powerplier (often referred to as the PPP on here), but the tools don't lock which might not be ideal for professional use - I think I'd want something I can trust not to fold up on me in your situation.
-
Looks like it has been narrowed down to Charge TTI or Wave , both great defaults . I've seen a lot of maintenance fellas use them . Locking is a most definate asset .
Chris
-
Damn I'm liking that whole Universal Tool Adapter thing, and it works for the Wave/Charge/Fuse all 3 Leathermans I was looking at! O_O I think we have a winner I'm going with a Leatherman and buying the UTA and bit kits. Should Cost pretty much everything I was looking to spend but I don't see any better options just gotta decide Wave or Charge Tti?
According to Ebay I'm looking at 50-65 bucks for a wave, more like $90-115 or so for the Charge Tti. Should I spring for the Charge TTi or just start off with the wave?
-
The Wave and Charge TTi are pretty much the same tool, but the Charge has Titanium handles and a higher quality steel on the main blade. The titanium is mostly for show, but does hold up a bit better to knocks and scratches, but probably not enough to justify the extra for a work tool.
The other thing to consider is that the Charge comes with a small selection of the flat bits and a detachable pocket clip, whereas the Wave doesn't.
Functionally, they'll both work the same!
-
Hmm now the only question is if I Ebay one how do I know I'm getting the newest model wave?
http://cgi.ebay.com/Leatherman-Wave-Multi-Tool_W0QQitemZ220576050676QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item335b5b6df4 <--- New or old?
http://cgi.ebay.com/Leatherman-Wave_W0QQitemZ170460315393QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item27b039ff01 <--New or old?
For now it seems like a good Idea to pick up the wave with UTA and bit kit. If I like it a lot I'll probably pick up a charge in a month or so. Just need to know that I'm not getting cheesed on Ebay with old model waves.
-
Those three links are all New model Waves Bill. Feel free to keep posting and asking - this is the kind of thing we do for fun around here. Yes, it is quite sad :D
-
Well if that's what you do for fun then I must be a few steps lower than that, I have no obligation to do ANY work outside of my work. Yet I sit at home googling and making phone calls from my own personal phone (on my only day off this week) about stuff at work so when I go in I can just get stuff done.
Awesome I'll be ordering one right now, and I'll get the bit kit and UTA from a site and not ebay so I can order both at once and get them at the same time. This whole shot is going to cost about 80 bucks, got off A LOT cheaper than I had planned now what to do with the money >:D. I do need a 2nd Benchmade......
Gotta appreciate the help from you guys, practically made my decision for me. I'll definitely stay posting here. Very friendly and helpful people, even when I posted my thread at like 4:00 am.
-
Bill to be honest with ya I prefer the pre 04 wave with all the slot drivers , I'd keep one , and turn one into an awl/scriber , and another into a chisel . The UTA is a superb piece of kit . It also fits on Victorinox models , and maybe some SOG's ( not sure ) . Grant (the boss man ) posted a list once upon a time . I would have brought up the Vic. Spirit , but you made it clear you wanted needlenose ( the Spirit is a hybrid ) , I use the UTA on it fairly often . Forgot my manners , I don't recall seeing you before , welcome to the sight .
Chris
-
All part of the service mate :)
-
could try a charge alx its a charge with 2 bit drivers (y)
-
I just ordered the wave, universal tool adapter and bit kit. It all cost about 85 bucks. Seeing as how the UTA and Bit kits are good for the charge as well, I'll probably pick up one of the charge models next month.
-
Cool , let us know how they work out for you .
Chris
-
Great. And welcome to multitool.org

-
-
yay for Bill!

they all gave you great suggestions, like stated, we live for that here :D
I woulda gone for the Sog/Paladin (because you could have customize it to your needs)
or ST300 but the Wave is an excellent tool! ;)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
