Best Awl Design and Shape?
-
Give me the awl on the old soldier anyday.

-
Seamonster, I will be using it mostly for reaming and punching holes. Have yet to use one for sewing or rope work....
Prime77, in your posted picture, which is the awl in the photo you are referring to? BTW, Thanks for the pic, good collection of awls.....
The awl bit I made for my Skeletool, did this hole in less than 10 seconds (1/4 plywood) which helped further my appreciation for awls. I often fabricate with plastic paneling and thin gauge aluminum and often need to make starter holes for a nibbler.....

-
The awl from SOG
-
Starting with the Juice awl that you know it's two awls going counterclockwise. I would describe it as being similar to an icepick.
-
Got to be the Wenger SI awl, with the 93mm Vic effort being a close second :)
They really are like having a Makita drill in your pocket

-
@Mike, Lord of the Spammers! said:
Got to be the Wenger SI awlThey really are like having a Makita drill in your pocket

I came across a photo that that awl, not even knowing it was a Wenger SI. I reshaped and sharpened the awl on my juice to match. It works very well. I notice that awls are more or less around the same size in multitools. Do you all find them adequate or do you find that a bigger awl would be of a benefit? While the awl on my Juice and the bit for my Skeletool work well, even when used to the maximum width of the awl, the hole is not as large as I would like for my intended purpose.....
~ evil ~*
-
@Mike, Lord of the Spammers! said:
Got to be the Wenger SI awl
They really are like having a Makita drill in your pocket

I came across a photo that that awl, not even knowing it was a Wenger SI. I reshaped and sharpened the awl on my juice to match. It works very well. I notice that awls are more or less around the same size in multitools. Do you all find them adequate or do you find that a bigger awl would be of a benefit? While the awl on my Juice and the bit for my Skeletool work well, even when used to the maximum width of the awl, the hole is not as large as I would like for my intended purpose.....
~ evil ~*
Well there fine for my need's, as I've never really had to drill anything beyond an inch :)
-
The Awl on the ALOX series is by far the best IMO.
-
Some awls for you Evil :D :D

Awl from Bear & Son , not too bad but a little short for hole boring.
SOG Awl , nice shape & SHARP. I have not used my SOG awls much though as they have wanted to fold onto me/fingers :o
On a locking SOG they would be top notch , not so good on my non locking SOG's. Not sure how strong the tip is though

Leatherman Awl from a Core, I think it is the same as a Surge. Not such a big fan of this style of Awl a bit too blunt in shape & not so good for hole boring.
Leatherman PST not very sharp & a bit blunt , easy enough to fix with a bit of sharpening though.
Awl on my 20+year old SAK Pioneer is a great one I reckon :D
SwissTool's Awl on top Spirit on the bottom. I actually prefer the spirit's Awl to the Swisstool's, longer cutting edge & it has a general purpose hook thrown in too :D :D
My favourite Awl the Spirit , nice point & very strong. I would be concerned the SOG's Awl tip would be easier too snap

My perfect Awl & why my Vic Spirit gets carried more than my Leatherman Pulse(does not have a Awl :() -
Wenger SI. Hands down.
-
I think the Surge has a decent awl, but I gotta give my vote to the Spirit as well. I've drilled some nice clean holes really fast with that thing. You say you work with plastics a lot: I used my Spirit awl to drill a small water drain hole in my car's spoiler (GM ::) ) and it took like 2 seconds to make a small perfectly clean hole.
On a side note: need to see the rest of that 510 lol.
-
*Thanks for the photos Mat! Here is the Awl Bit for my Skeletool. It is more or less a mini version of the spirit awl (similar shape, profile). It is rather short and stubby but very effective as I made it with double sharpened edges. Part of the goal when making it was that it fit into the card for the bit kit.....
~ evil ~
BTW Mat, did you ever pick-up your airbrush yet?*

-
Evil one how do you store your Skeletool's 'sting'
:D :D :DBob/J-Sews did a pretty cool awl mod as well;
/topic/1111I am waiting too hear back from the AirBrush web store :( , everything has been closed in OZ since Thursday :D :D
-
@MultiMat said:
Evil one how do you store your Skeletool's 'sting'
:D :D :DBob/J-Sews did a pretty cool awl mod as well;
/topic/1111I am waiting too hear back from the AirBrush web store :( , everything has been closed in OZ since Thursday :D :D
*That mod came out very nice and sure would have saved me a few steps, not to mention time lol. Oh well, I don't mind fabricating from scratch, it's what I do all the time anyway. The Skeletool project is just about done so I have been focusing on making enough custom bits to fill up both cards in the bit kit that I will actually use .....
~ evil ~*
-



are you now AWL struck with the AWLsomness
-
Y'awl took some nice photos there

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login