SuperJuice KFS4
-
We used to dream of a dremel and belt sander on a half broken IKEA table. ::)
-
@sparky415 said:
We used to dream of a dremel and belt sander on a half broken IKEA table. ::)All i have is a dremel :D although a very useful tool

-
bob its the weekend now

just sayying :)
-
Yeah.... I wanna see it

-
Bob this looks like it will be a truly useful yet beautiful tool

I really hope someone in Leatherman's R&D department takes a look at this :D I think the Juice range has so much potential especially for us poor UKites :-\
I almost cried a single tear when I saw that lovely purple XE6 in bits on the operating table :'( but I realise its sacrifice is for the betterment of Leathermankind; I salute you XE6

-
@cerbera147 said:
Bob this looks like it will be a truly useful yet beautiful tool

I really hope someone in Leatherman's R&D department takes a look at this :D I think the Juice range has so much potential especially for us poor UKites :-\
I almost cried a single tear when I saw that lovely purple XE6 in bits on the operating table :'( but I realise its sacrifice is for the betterment of Leathermankind; I salute you XE6

Nice

-
Made some definite progress today, but in the end it fell just short of the goal. :-\ And for such a silly reason too..... :P
The whole story:
I finished machining the backsides of the scales this morning, which went much easier than anticipated. :) Then came assembly time!
Yay, this ought to be fun, right? WRONG! :P After spending over an hour fighting The Battle Of The Backsprings, it was back to the shop to make a little assembly jig. Then things were proceeding nicely again, until it became apparent that my pivot screws are too short. :'( The ones I bought from www.knifekits.com are one half inch long:
Unfortunately, it appears they need to be just a little bit longer. :( These are already the longest ones knifekits sells, so I'll have to make my own. :(
In the mean time though, I was able to assemble up the first layer and the pliers layer, just to get a feel for it. Here's a few pics. (keep in mind there are no back scales in place yet)


Showing cap screw being used as thumb stud

Pliers deployed

Screwdrivers

Special blade load out for Mike LOTS :D


-
:o That is gonna be so awesome when you get finished
But I would have took out the serrated blade and left in the saw ::) Yeah I agree with Mike on something :D ;) Still it is gonna be so cool to see the finished product Bob 
-
Do you think the pivot screws will be long enough for a S2? should be right, I could go measure, but it's so much easier just to type and ask!
-
@wvucyclist said:
Do you think the pivot screws will be long enough for a S2? should be right, I could go measure, but it's so much easier just to type and ask!Yep, they'd be plenty long enough for a single-blade-layer tool like an S2 or C2

It's only when trying to add a second layer of blades that they come up short. :-\
-
Bob that does look very very cool
.If only we had a good fastener source, Bob , life would be so much easier doing LM mods :( :( :( :(
Good luck making the custom jobs Bob , sounds fiddly

-
Amazing Bob. I can't wait to see the finish product.
-
thts awesome, did you have to push fit the thumb studs?
-
That is (going to be) a thing of beauty Bob - good luck sorting out the fasteners.
Then, can you make me one please? Just a single layer one, I'm not greedy :D
-
-
HEY LEAVE BOB ALONE SO HE CAN FINISH. Note to Leatherman......why are you not hiring this man?
-
@J-sews said:
Made some definite progress today, but in the end it fell just short of the goal. :-\ And for such a silly reason too..... :PThe whole story:
I finished machining the backsides of the scales this morning, which went much easier than anticipated. :) Then came assembly time!
Yay, this ought to be fun, right? WRONG! :P After spending over an hour fighting The Battle Of The Backsprings, it was back to the shop to make a little assembly jig. Then things were proceeding nicely again, until it became apparent that my pivot screws are too short. :'( The ones I bought from www.knifekits.com are one half inch long:
Unfortunately, it appears they need to be just a little bit longer. :( These are already the longest ones knifekits sells, so I'll have to make my own. :(
In the mean time though, I was able to assemble up the first layer and the pliers layer, just to get a feel for it. Here's a few pics. (keep in mind there are no back scales in place yet)


Showing cap screw being used as thumb stud

Pliers deployed

Screwdrivers

Special blade load out for Mike LOTS :D


These pics are well worth repeating on this page.

You're a real craftsman Bob.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
