Piranha by Pockettoolx.com
-
The pic won't be the best, these pics for this review were taken with our 7MP Sony but it's messed up at the moment and our other one has no macro lens or anything for taking good close ups. I can still try though.
-
-
-
-
-
Thanks for the review. I was thinking about ordering one until i realised one little thing, and perhaps you folks can shed a little light on it for me.
What are the box wrenches good for when you don't use the biggest size but the smaller ones? If you use the biggest size the box wrench acts like a
stand alone one would do, since the nut can't move in any direction. But when you use the smaller sizes the nut still could "escape" in the direction of the bigger end, just like it would when using the open side. What am I missing? -
You just have to keep your tension in the direction of the smallest portion of the wrench. You right, if you slack up the nut will slip out. It took me a while to get use to it but I do it now without thinking. The wrenches are meant to be like a last ditch tool and something you use when nothing else is available. If you had a full socket set or a adjustable wrench (crescent) you wouldn't still pull out a box wrench would you? Since I don't carry a multitool with pliers alot of times I always carry something that has box/open wrenches on them to help offset that problem. I like them so much I have 5 pocket tools with the wrench on them. I know, I'm addicted right? ::)
-
Yeah of course. But since these tools are about squeezing the most amount of tools in the smallest amount of space i'm just surprised that there's essentially wasted space since the 5 (or 4 for the metric version) smaller wrench sizes on the box side are redundant. The only real addition is the biggest size.
Wouldn't it make much more sense to incorporate alternate sizes on both sides? For example 6, 8, 10, 13 and 15 on one side, and 5, 7, 9, 12 and 14 on the other side. That would add a lot more flexibility to the tool than just one box wrench size.
-
I'm confused, are you talking about combining sizes into one wrench end like the Pocket Wrench tool does?

-
No, sorry for my lack of linguistic skills. Let me give it a better try:
As i understand it both wrenches of the Piranha have the exact same sizes, the difference one being open and the other being boxed.
But since the box side only really works as intended with the biggest size, the other sizes are redundant.
So if you leave the open side as it is, but change the sizes on the box side so both complement each other, you gain "new tools".
For example 6, 8, 10, 13 and 15mm on the open side and 5, 7, 9, 12 and 14mm on the box side.
So you'd loose the 15mm box size, but in return gain 5 new sizes you didn't have before. -
Well yes it would, when the first generation model came out (the one I reviewed) they stupidly made the tool with the same sizes on both sides. I didn't see the reasoning because I have a Atwood Funnybone that has SAE on one side and metric on the other, why couldn't they do this with the Piranha. Well after MUCH complaining from the public they have produced the Gen2 model that now has just that. The new one has...
Wrench Sizes:
Standard: 9/16, 1/2, 7/16, 3/8, 5/16, 1/4"
Metric: 6, 8, 10, 13, 15mmNow I want a Gen2 to make up the difference. The Atwood WingNut has the same redundancy, both the box and the open are the same size. If MK7 did get the idea from Peter they should have made the logical choice the first time to pick both sizes (metric/SAE) and not the same on both ends. Who knows why they chose it, maybe they felt those were the most popular or common sizes and folks wouldn't need more.

-
Went to their website to order one, but you have to choose either "standard" (inch) <u>or</u> "metric" when putting it to the shopping cart.
And the product page also doesn't mention that there is one available with both SAE and metric on the same tool.
Now i'm confused.... ??? -
E-mail them and ask them, as far as I know Gen2 has both US and metric on the same tool. Why it said reg or metric I don't know, unless they forgot to change that part of the website.
-
I just got the anwer from pockettoolx regarding the Gen2:
Currently the Gen2 Piranha has metric-only version and a standard-only version.
You are correct in the fact that the box end only truly works as a box on the largest size but have since kept it in that configuration as the box allows for a user to apply more torque without the tool flexing as much. This isn't readily apparent, and has been a discussion here since Day 1.
With these things in mind, we will be introducing a new Piranha in the near future that has a standard open end and a metric closed end. There will be some more features added as well with this new design.
So Gen3 it is for me...

At least no need for you to get a Gen2 after all
-
-
-
The funnybone is really just a custom version of the Pocket Wrench II. Only the pocket wrench has both sizes in one wrench and also supports prying and a hex hole. The funnybone though is very pocketable/key chain freindly.
-
Leatherman sure ruined a good product, then discontinued it. It is still a much wanted and useful tool. Have one remaining. Trying to find a better way of carrying it so as not to get lost. S-biners are untrustworthy as tonight I lost a Leathernan Pump that I used for merchandising. Did buy a cheap Croc as if I lost it would only be out the $5 I paid for the dumb thing. Would rather carry the Piranha.
Wished someone would being back the Piranha
Do wished some manufacturer would make an adjustable bar/crescent multitool that is worth its weight to carry. Seen an in-like adjustable wrench small multitool from back in the 60's or later. Wished I saved the photo. Rather than adjust like a crescent wrench this one adjusted up/down a bar, perfect for a multitool design.
Best pocket wrench idea I've seen that was similar is (https://www.amazon.com/BIG-IDEA-DESIGN-EDC-Wrench/dp/B07QBJ2MKF) and is nothing more than a wrench.
-
How they justify that price is beyond me. ::)
Def
-
I still carry my piranha tools, keep one with the driver bit removed and keep it in my rebar pouch. Rebar stays in my vehicle for times when the tool I have on me needs backup. I agree with Leatherman dropping the ball on these, they were a great product and after Leatherman bought them they didn't do the product justice, I'm glad I've got the originals.
Sent from my SM-G996U using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
& 