New Reviews
-
@Grant Lamontagne said:
Lefties may have a problem with the HawkHook, as the pocket clip can get in the way of the ambidextrous pocket clip, and there are no places to relocate the pocket clip to, although it can be removed altogether.If it has a fixed location, but can be removed how does it make it mabidextrous
:D Guess it's a typo. Great review Def, I've been eying the HawkHook for a while now, wish they made an orange one 
-
Just wondering Def, you say in the Screwpop review in the end at the pro/con section "Not as functional as other tools in this category" Which are more functional in you opinion in this category? I guess there is not much in this category, other one piece tools are usually much more expensive.
Btw, great review as always

-
Donvito- It's not fixed, it's screwed in, but there are no other screw holes to relocate it to, so if you remove it, it's just removed, unless you drill/tap your own holes.
Zepla- With a tool that simplistic I was reaching for cons- my pattern is to always provide three pros and three cons so it stays balanced and objective. With some tools I'm really reaching to find three good things or three bad things, and in this case that was the best I managed. I put it in the same class as the CRKT Get-A-Way Driver since they are both keychain type bottle opener/screwdriver tools. Compared to the Get-A-Way Driver (God I hate that name!) the ScrewPop comes up short as the CRKT has twice as many screwdriver options, a carabiner, an LED light and can be used in the 90 degree position as well as straight. Of course the Get-A-Way Driver retails for $20 while the ScrewPop retails for $5, but when you consider that most of us buy these things online and shipping costs need to be added, there really isn't much difference- especially when you look at a $5 tool that will sell for $5, and a $20 tool you are likely to get for $12. Basically both tools can be had for pocket change, and so I feel the little bit extra money is justified by the extra function of the Get-A-Way Driver.
But, by all means, keep the questions coming!
Def
-
Yup- that's what I meant! Fixed now! :D
Def
-
No problem- that's why I posted it here in the first place! :D
Def
-
@Grant Lamontagne said:
Donvito- It's not fixed, it's screwed in, but there are no other screw holes to relocate it to, so if you remove it, it's just removed, unless you drill/tap your own holes.Zepla- With a tool that simplistic I was reaching for cons- my pattern is to always provide three pros and three cons so it stays balanced and objective. With some tools I'm really reaching to find three good things or three bad things, and in this case that was the best I managed. I put it in the same class as the CRKT Get-A-Way Driver since they are both keychain type bottle opener/screwdriver tools. Compared to the Get-A-Way Driver (God I hate that name!) the ScrewPop comes up short as the CRKT has twice as many screwdriver options, a carabiner, an LED light and can be used in the 90 degree position as well as straight. Of course the Get-A-Way Driver retails for $20 while the ScrewPop retails for $5, but when you consider that most of us buy these things online and shipping costs need to be added, there really isn't much difference- especially when you look at a $5 tool that will sell for $5, and a $20 tool you are likely to get for $12. Basically both tools can be had for pocket change, and so I feel the little bit extra money is justified by the extra function of the Get-A-Way Driver.
But, by all means, keep the questions coming!
Def
Thanks for the reply. Makes totally sence

-
I'm partial to the CRK&T tool eatin tool

-
@BIG-TARGET said:
I'm partial to the CRK&T tool eatin tool
I like the look of it but I'm quite sure I would end up piercing my tongue or something :-\
Thanks for all the hard work Grant

-
@Grant Lamontagne said:
The top dog in this particular line was the now discontinued h502.Being the largest in the series, the h502 is a pretty bulky knife- so bulky in fact that it's the only one in the entire series that doesn't include a pocket clip,
just a silly question, the h502 is the same size as the h503 and k502/503 correct?
-
@Grant Lamontagne said:
The top dog in this particular line was the now discontinued h502.
Being the largest in the series, the h502 is a pretty bulky knife- so bulky in fact that it's the only one in the entire series that doesn't include a pocket clip,just a silly question, the h502 is the same size as the h503 and k502/503 correct?
That's right - the K502/3 has the better 154CM blade steel, and some aluminium where the H502/3 has rubber....
Have a look here if you haven't already :)
-

talk about deceptive markings - those are OBVIOUSLY Chinese knives from Yangjiang, I know I've seen enough of em :ahhh
-
They say China on the opposite side of the blades.


I don't believe they are trying to suggest falsely that the knives are US made, just trying to point out that Utica Cutlery is still US owned. Besides, at the price of these, you wouldn't get any knife made in the US.
Def
-
DEF- Thank-you for the reviews.
-
No problem- One of these days I'll get the photos done and get them posted on the main site. I also have another couple of tools to review to add to the list.
We'll be hitting the 200 mark soon!
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login