Triumph Photos.
-
@Mike, Lord of the Spammers! said:
I've never owned a motorbike, but Triumph is a name with a proud heritage around here for sure.
That might be because I live just down the road from the factory though :D
Are they all still made in Hinckley does anyone know?
Some are, **but since the big factory fire ** I believe most are made in Taiwan :)
John..?
:DDistinct possibility :D
-
i wonder how much pain chako's in right now? >:D
-
I just got back. I was super sore this morning...but once I got going, things became fine. That is until I stopped again....and then rigor mortis set in.

But good news. Everyone of the 10 students in my class passed. Better yet, we did it in a downpour!

Now I just have to wait till July 17, which is the 60 days mark, to hand in my pass to the local MTO to reach M2 level.
I would love to drive it to work on Wednesday...last day before holidays. That would fulfill a personal goal of mine since I embarked on this crazy venture. Time will tell. If I don’t make it, I am happy either way.
-
If you're going to ride it to work, then go a time or two when the traffic is the lightest. You want to focus on the traffic around you, not on where you want to be in the lane, where potholes are, tar snakes, etc...
-
Well morning commute is devoid of traffic. Getting back home could be a bit scary though. I am going to take baby steps first. Get used to the bike and then once I am comfortable, start to drive it on the streets. This is why I am sure I won't make my bucket list. Happy either way though. :D
-
Congratulations on the pass mate.

-
Well done chap

-
Thanks. :D
-
Do some parking lot driving (empty--full lots can be challenging). I have the itch for a long ride....time to plan an overnight with the boys.
-
I agree.
-
Congrats mate,and happy riding,after the 17th.
& 
-
I can ride it now...but the weather is not cooperating. Not so sore today. Actually feel rather good. :D
-
I rode it for the first time this morning. I took it out for a 3 block spin X2 around the house before going to work. I was surprised at how much more comfortable this bike is compared to the smaller bikes. I had no problems getting my boot under the shifter, and the floor boards are a lot more comfortable to the pegs on the Yamaha dirt bike. Because it was my first maiden voyage, I was unsure what to expect...so I took it very easy. I stalled it on 3 corners. I was not giving the bike enough gas and would stall in first on takeoff. I will admit I was a bit intimidated at the larger motor, not knowing what to expect. I am sure that once I get better acquainted with it, we will both get a long a lot better. Even though I stalled her 3 times, I was very happy that I didn't drop it or keel over, or do something real stupid like let go of the clutch. I now know I did the best thing and waited the month for that safety course. I know I am still not ready for traffic yet. Going to practice my clutch work and take offs before I want to merge into traffic. I am on my way to what I think will be a wonderful voyage of learning and experience.
-
This may help:
That bike has an oil bath clutch. It makes engagement smoother and the clutch cooler. It is NOT like a car clutch. You can "slip" the clutch as much as you want. The oil will keep it from burning it out. Variable application of the clutch is a TOTALLY legit action on a bike.
To start out, give it gas, and let the clutch out a little until it takes up drive. Hold the clutch there until you're ready to fully engage the clutch.
A really good drill to practice this is the duck walk. Slip the clutch enough to "paddle" the bike around on your feet with engine assist. It is a good skill in parking lots and gives you the feel of the engagement point of the clutch of your specific bike.
Good job!
-
Thanks for the tip. We did something like that at the course. It involved having both feet planted on the ground; let the clutch out slowly until the bike moved forwarded gradually until you’re on your toes. Pull the clutch in, roll the bike backwards, and repeat. On day two of the course, we were doing the duck walk to cue up in a line for our exercises. :)
No, I was a bit intimidated with the power of the 800cc motor over the 125cc. I was surprised at how much power the 125cc had, and I figured I would be very gentle on the Triumph for my first time to get a feel for it. I was being too gentle with the throttle. Next time out, I will work on that. :D
-
Whippy would know better but when I had my old bike I use to park in an underground lot. I had to get good in a hurray working the clutch after needing to stop on a steep incline, then start forward again.
-
Well I just came from my second maiden voyage with the Triumph.
<----Big Grin here.
Well I must say I even impressed myself somewhat. I had rented 4 DVDs and it was time to take them back. I figured since it was a beautiful day, it was time to take the bike out again. I drove there with no problems. I was very proud of myself as this was the first time I had to deal with other vehicles. However, once I finished handing in the movies, and it was time to take off, I kept stalling it in first. I did this several times until I figured out my error. I was leaving the kick stand in place, Doh! I won't be making that mistake ever again. Emboldened with my newfound mistake, and realizing this was the issue on my first maiden voyage, I decided to do some at speed riding. I set my goal of visiting a friend in the country side. I reached him with no issues. This was a landmark ride for me full of firsts.
First time I figured out why I was stalling it.
First time I rode in traffic.
First time I reached 4th gear.
First time I reached 50 miles an hour.This was a huge confidence builder. Now I know I can do it, and safely. :D

-
Admit it, how many people were watching outside the rental place ;)
stay safe 
-
2 people. I could care less. I am learning.
-
@Chako said:
Well I just came from my second maiden voyage with the Triumph.<----Big Grin here.
Well I must say I even impressed myself somewhat. I had rented 4 DVDs and it was time to take them back. I figured since it was a beautiful day, it was time to take the bike out again. I drove there with no problems. I was very proud of myself as this was the first time I had to deal with other vehicles. However, once I finished handing in the movies, and it was time to take off, **I kept stalling it in first. I did this several times until I figured out my error. I was leaving the kick stand in place, ** Doh! I won't be making that mistake ever again. Emboldened with my newfound mistake, and realizing this was the issue on my first maiden voyage, I decided to do some at speed riding. I set my goal of visiting a friend in the country side. I reached him with no issues. This was a landmark ride for me full of firsts.
First time I figured out why I was stalling it.
First time I rode in traffic.
First time I reached 4th gear.
First time I reached 50 miles an hour.This was a huge confidence builder. Now I know I can do it, and safely. :D

Nothing to be ashamed of there. EVERYBODY does that from time to time. The reason there's a kill switch is, if you make a left hander with the kickstand down, you WILL high side. No chance at saving it. Outcomes were so bad, that it became mandatory (in the US at least) to have a kickstand killswitch.
The one to be embarassed about is taking off with a brake disc lock on. When it hits the forks, you go over the bars (or drop the bike :-[).
You did great.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
