Imported Slip joints
-
Yes I think the guys are right, it's around 440 A, as is stamped "440". I whittled a maple walking stick with
it Gadget and it was still plenty sharp when I was finished. I have a leather strop with some compound on
it and less than 5 minutes on it and it came back shaving sharp.Thanks for the info!
You really can't beat the price and I really don't mind sharpening anyway. ;)I... I feel betrayed! GG is headed for the darkside! Ye Gods be spurned! Quickly, GG, send me all of your made in the USA products so the Gods will no longer be confused by your allegiance!
EDIT: I have a few Rough Rider congress patterns that make it into my rotation every once in awhile.

-
@sappyg said:
thanks for the link sean.... i've been looking hard at queen, GEC, and CV cases. ATM the CV case is wining (love that swayback CV) but now i'll add the RR to the mix.in order of interest for me
- case CV
- GEC (i like 1095 carbon personally)
- queen (honestly not so crazy about D2 steel)
- rough rider.... very intersting

BTW.... love the new avatar

sappyg,
If you are liking Queen but not up for their D2 then look at their QCCC runs. A majority of the QCCC patterns are done in 1095 Carbon Steel. Also look at the MooreMaker line of slipjoints. Their higher end patterns are built by Queen and are bladed in 1095. I would also suggest looking at the earlier 1990's era Case Classics, a majority of the patterns here were built by Queen under contract and are all bladed in 1095, as were the same era's USA made Winchester slippies......Queen built and of 1095.
And another I would like to add as you seem to be a fan of 1095 is the new Utica Cutlery Co. line of slipjoints. The company is back and building slippies here in the USA again. They have a couple new lines out in their Catskill and Big Pine Series of slipjoints, all bladed in 1095. Take a look.... http://www.kutmaster.com/productline/uticacutlery/
Although I will say you can not go wrong at all picking up a Northfield or Tidioute from GEC. If you like 1095 these are superb slippies.
2xTap
-
@nuphoria said:
I agree, excellent value knives
Thanks for the review and pics too :D
I have a couple of them myself and the Canoe is really great, well worth the asking price, even in the UK!
Yeah I was checking out your local supplier. Nice he has them! :) The canoe pattern is one I'm looking
at pretty closely. -
well now every since sean posted this thread i think i have read about everything i could find on these RR knives. i'm completely amazed by what you get for the money. i'll be ordering one or three ;)
-
Sappy,
I think you'll be really quite happy with them. There are some sellers on ebay with free shipping and
some that I'm sure have the whole line. Post a pic or two when you get them.
-
you betcha.... i love pics.
-
i got three RRs in yesterday evening. two of them were just to try an different pattern to see how i like it. i'll just post one at a time. i've always wanted to try a congress and i got a thing for tortois scales.


F&F is outstanding but you can see that one sides scales are proud.

i like the knife. it has reasonable snap and came razor sharp albeit a little toothy. aside from the 440a steel used one thing i noticed was that the blades are fairly thin. they have a good bit of flex to them and i don't think they could take much heavey use. b/c of this it is light weight and very comfortable in the pocket at 3 1/2".
-
Now that is a striking set of scales

-
Looks good sappy!
What else did ya get? -
a very sexy sawcut whitler. :o
this is the best of the lot by far. the build is outrageous and F&F is as good as i have seen among whitlers. i think the whitler is one of the hardest slipjoints to get right.

have a look at the spring joint here. i've never seen better on a whitler.

i'm totally taken by the sawcut scales but not so much by the scalloped bolsters. plus, they seem to be slightly yellow of all things. the weight is right around that of the kissing crane whitler i posted elsewhere but it stomps the crane in build and finish. this one has put in some time doing what it was designed to do and i have no complaints. the blades are stiffer than the congress and TU quickly. i can see this one getting a lot of use.
-
lastly; a trapper. i got this one to see what all the buzz is about. i've never had a trapper and they seem so popular. well, the price was right.



the RR only confirmed for me that the trapper pattern (at least for me) is only a passing fansy... fasionable and nothing more but, oh what a tart i am for RRs sawcut bone scales. it has the same kind of yellowie tint to the superbly done scalloped bolsters (though not my taste). the blades are very well centered and this kind of western build/ labor could easily add 8-10 times the price paid for this RR.
my issue here is not with the manufactured product as much as it is with this very trendy pattern. it's way too big and heavey at 4 1/4" and not nearly as useful as say a kershaw skyline. the long pull does magnify the poor nail nick on the clip blade which could easily do w/o the matchstrike for a better purchase. the blades (especially the clip) tend to be too light and springy much like the congress. when closing you feel a 'sproing' that's not entirely from the springs. i do not care for the trapper pattern. RR allowed me to confirm this for a fraction of the cost from a high profile maker. -
I'm looking at the backspring of that whittler (3rd) photo and it looks to me like it's cracked? What
am I not seeing quite right here? ??? -
That design uses a split backspring. Its meant to look like that :)
-
Interesting, I never knew or heard of that, thanks.
-
sappyg,
Nice grabs bud. The RR's are great for what they are, ain't they? And as you mentioned they gave you an opportunity to try out a classic pattern (in this case the fullsize Trapper which happens to be the most collected slipjoint pattern out there) to see if you like it for very little money.
And I am with you on the Sawcut Bone, I too like it alot but could do without the fancy bolsters. The only one of that series I have is their large Stockman........

......I am partial to the larger patterns.
Sean,
As Neil mentioned it is a Splitback Whittler. The design has been around a long time, a very oldschool way of doing things. And much more expensive to do as well.
2xTap
-
Thanks again for the clarification. Can anyone take a pic of the split backspring up close? Why do
they do that? I find it all a bit interesting. :) -
Are we talking about the same thing? I thought Sean was talking about the right side spring have a black line in the middle?
-
@2xTap said:
(in this case the fullsize Trapper which happens to be the most collected slipjoint pattern out there) to see if you like it for very little money.
2xTaphey tap,
why is it that the trapper is so popular with collectors? i really don't get the pattern personally. i think it's pretty but not near EDC standards IMO. functionally it's great if you're a trapper but most collectors aren't trappers. you'll get a lot less gunk on you during use on smaller critters but i don't see the intrigue for a collector. i do think the pattern can show off what the maker is capable of to certain degree. i'm not a collector but an accumilator i spose.
on an aside: i have seen 'whitlers' by respected companies that are as far removed from what a whitler is that they can't even be called stockman. -
@jzmtl said:
Are we talking about the same thing? I thought Sean was talking about the right side spring have a black line in the middle?i've gotta learn to clean and clean again before i take a pic.... that was some dirt of some kind from my pocket. i swear it was not there when i snapped. the black thing is not a part of the whitler from RR. in fact, the build and finish is comendable.
sorry sean,
my camera can only do so much. that's as close as i can get.
a true whitler has a split spring that a lot of makers can't get or cheat by making two bigger springs that can handle the load but will develope side to side blade play under the lightest use in my experience. -
(in this case the fullsize Trapper which happens to be the most collected slipjoint pattern out there) to see if you like it for very little money.
2xTaphey tap,
why is it that the trapper is so popular with collectors? i really don't get the pattern personally. i think it's pretty but not near EDC standards IMO. functionally it's great if you're a trapper but most collectors aren't trappers. you'll get a lot less gunk on you during use on smaller critters but i don't see the intrigue for a collector. i do think the pattern can show off what the maker is capable of to certain degree. i'm not a collector but an accumilator i spose.
on an aside: i have seen 'whitlers' by respected companies that are as far removed from what a whitler is that they can't even be called stockman.sappyg,
First thing to take into account is depite what a particular pattern was meant to do or who it was originally designed for, just throw that out of the equation. Slipjoints have been around for a few Centuries now, and your most popular styles now are designs based off of oldschool English designs or Classic American patterns. Many of which have been found to work quite well in all manner of work.
That said, and this applies quite well to the Trapper pattern, simple is best. In it's many forms it is a workhorse of pattern and one that nearly every maker of slipjoints has produced or still is producing. You look at every big name slipjoint maker out there now, every brand.....Case, Hen & Rooster, Boker, Henckels, Bulldog, Weidmannsheil, Eye Brand, Queen, Schatt & Morgan, Robeson, Great Eastern, Northfield, Tidioute, Colonel Coon, Steel Warrior, Schrade, Camillus, Bear & Son, Buck, Remington, Winchester, Canal Street, Rough Rider, Kissing Crane, Ulster, Colt, MooreMaker, Fightin' Rooster, Indian Head, Owl Head, etc., etc. Not all of these brands have Clasp Knives, or Sodbusters, or Swayback Jacks, or Canittlers, or Grandaddy Barlows, or Tear Drop Jacks, or Toothpicks.......but they all have Trappers in one form or another.
Add to that most companies when they produce Anniversary models, Commemoratives, and Special Editions they are often done in the Trapper pattern. On top of that it generally is, in the standard 4 1/8" size version, one of the least expensive patterns. All of this adds up to a top selling pattern for many companies. And it's been doing so for many years.
2xTap
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login