What Did You Use Your Multitool For Today?
-
That depends on what you mean by bad really!
They're all very well made and would suit someone, but for example I found the Thermite and the Fatboy to be not for me.
-
Thermite..? I got one of those.. :D :D
-
There's nothing wrong with the Thermite IMO - it just wasn't big enough for my needs. I did carry it for 12 months before I decided that though!
-
I really need to get one of those maxpedition thingies everyones on about. never even seen one IRL xD
-
@Andreas said:
I really need to get one of those maxpedition thingies everyones on about. never even seen one IRL xDIf have gear and like to carry gear you need Maxpedition in your life

Damn expensive but they don't call it 'Hard Use Gear' for nothing. They just make great bags
Worth saving up, although can be addictive :ahhh I currently own two bags, two waistpacks and an organiser 
Dave is the forum's Maxped
junkieguru
:DTake a look
http://www.maxpedition.com/ -
I keep promising to do some Maxpedition reviews, but the fact is - nothing I can do is going to rival Ros' reviews - they're the best out there!
^^ Everything you ever wanted to know about Maxpedition but were afraid to ask...
-
Never really been much a bag guy, I have a laptop bag that works wonderfully to carry my laptop the 100 meters (literally) from home to school. Whnever I'm out I either don't carry a bag, or if I'm geocaching I have everything I need in my camera bag, I like traveling light :D
-
I used my Gerber EAB razor knife to open packages. It's often the best tool for the task but sometimes scissors work better :)
-
Yesterday used my Fuse to assemble a very large charcoal grill for a customer.
-
Yesterday I used my Vic Trekker to make breakfast, it helped to repair the car, helped in the garden (hand in hand with the farmer) and I used it to crack walnuts. After all the work I used the reamer to get the dirt off from behind my fingernails. I LOVE this Vic already, but I guess I need a sheath for it, it is too large for my pocket :ahhh
-
Used my EDC gear (lm squirt P4 and vic swisscard lite) to give my beyerdynamic dt770 headphones a real cleaning. Removed hair from the membrane that caused noises when there was bass present
-
ST300 flat screw driver to open a cash box which key i lost 10/10

-
Gerber shard philips end to quickly tight up screws on rear view mirror on fork lifter!
-
I havnt had my current car that long , its a Ford 2litre mondeo . The rear window washer didnt work from the start and yesterday the front washers packed up too :(
This was a job for Super... no hang on not supertool but PST :D and bit adapter .
Its was really awkward to reach and the problem wasnt obvious until I'd removed countles screws and removed panels .




Heres the problem , its just the pipe came off , I was worried there was a split in the pipe or worse the tank had split . So a simple job but not easy to access . I had to remove the front offside air intake and put my right hand in through it with the pst pliers to grasp and hold the pipe while my left hand went in under the front wheel to push the fitting into the pipe .....



My little LM Monarch 300 was just the right tool to help me see what was going on . Despite being a very bright sunny afternoon it was really hard to see inside where I was working .


Last pic of the tools I used ....

Dunc
-
Used the phillips on my Trailmaster to open a geocache. A friend solved the puzzle at home and the outdoor part of this cache fit on our tour, so we did it. I didn't know that any tools were required, and my friend missed that part in the description and was unprepared, too. No problem with the Trailmaster

Dunc, thanks for the pictures! I just got the bit adapter for my PST II from my father. He lost his PST
but not the bit adapter, now I can have it :D. I couldn't figure out how to put it on the PST II (but haven't tried hard yet, and didn't any research ::)) I think with your pictures I can figure out how it works 
-
Got a Signature Lite from Neil yesterday which saw some use today

-
Used my Swisschamp (with illumination help from my L0D) to fix a friend's closet door. The bottle opener did some prying, pliers and wire cutter both saw some action, and the Phillips tried it's best to do it's thing. The driver kept collapsing whenever I used enough force to actually turn the screw without slipping (in it's defense, said screw was REALLY tight) so wound up having to use a dedicated driver :(
-
I used my wave to stab into my leg last night. Yep use the wrong tool for the job and the wave gets mad and bites.

My toolbag was too far away at 8 feet for me to walk allllll the way over for my screwdriver. :P -
-
I used my wave to stab into my leg last night. Yep use the wrong tool for the job and the wave gets mad and bites.

My toolbag was too far away at 8 feet for me to walk allllll the way over for my screwdriver. :PGood work buddy..

:D :D
So it's no longer "Now you're ready," nor "Now you're rusty," but "Now you're bloody?" :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login