Drop resistant flashlight
-
http://www.energizer.com/products/flashlights/worklights/Pages/hard-case-flashlights.aspx
Energizer Hard Case flashlights. I have a spot that has seen some abuse and it keeps on ticking.
-
I've dropped my Gerber Infinity from about 20 feet (was on a lighting gantry at the time) and apart from chipping the anodizing it was fine :)
Not really the form factor your after I know, but It's the only light I've dropped :)
A lanyards a must when working at heights though :)
-
Of course lanyards are great at heights, but really it's just me fumbling with a light at waist height.
-
You can throw the Ra against a wall several times and it will still work,one point about led they're usually shock proof ;)
[edit] TBH any led based light will work after being dropped from the height you specify

-
I've dropped my Fenix down a lift shaft and not a scratch to it
-
If I can get around to it I'll prove it tomorrow with a cheap led light ;)
[edit] Hold on I'll do it now

-
I have dropped my Fenix L2D several times on about any terrain, and even dropped it into a small river. No problem

-
....
-
I would still get that Energizer Hard Case. Rated to survive a 30 foot drop.
It would be interesting to see if you could kill one of those during normal usage. :D
-
@Chako said:
I would still get that Energizer Hard Case. Rated to survive a 30 foot drop.It would be interesting to see if you could kill one of those during normal usage. :D
Chako that light has been higher than that and dropped,I was just trying to make a point led in general(whatever the brand) will take knocks ;)
oh and note: I threw it ;)
-
Yes, but that still does not mitigate gafftapegreenia's statement of breaking flashlights.
So why not go for one that is rated for a 30 foot drop by the manufacturer, and is designed for the construction industry. Your cheap flashlight may take several bounces, but will eventually fail as it was not rated for such abuse. LED or not.
Just my two cents.
-
@Chako said:
Yes, but that still does not mitigate gafftapegreenia's statement of breaking flashlights.So why not go for one that is rated for a 30 foot drop by the manufacturer, and is designed for the construction industry. Your cheap flashlight may take several bounces, but will eventually fail as it was not rated for such abuse. LED or not.
Just my two cents.
Actually you are totally wrong every led is rated for shock proof,now how the Manufactures bond them to a flashlight is totally different ;) it all depends on what quality bonding they choose to make
oh and don't read to much into ratings ;) -
And just to end I indeed had one(rated) from sunlite who are for industry and it failed,$128 is not cheap ;)
[edit] But the $1 light still shines

-
You might try peli lights, they're a little behind the group on led tech but as far as cases, water proofing and just taking a beating they are top notch,
They also have a life time no quibble guarantee, which means what ever happens just take it to a dealer and they'll give you a new one there and then, doesn't matter how trivial the damage is either I've seen this happen when someone snapped off the pocket clip off theirs
-
Fair enough. I know myself; I have broken a few LED flashlights. Yes, they are not as fragile as bulbs...but I can still break them unfortunately. You probably are right also, the LEDs could still be good, but it doesn't seem to do me a lot of good when everything else fails around them.
-
@Chako said:
Fair enough. I know myself; I have broken a few LED flashlights. Yes, they are not as fragile as bulbs...but I can still break them unfortunately. You probably are right also, the LEDs could still be good, but it doesn't seem to do me a lot of good when everything else fails around them.everything around it,PROTECTS IT

-
Get a decent LED light and wrap it in paracord to add some protection. If something breaks it will be the Cree LED falling off the PCB from the shock.
-
Super glue for the paracord you mean? The cree LED is naturally on the PCB when you buy the flashlight -__-
I have had the actual LED fall off the PCB on a stock flashlight, hence why I know that is the failing point
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
you use super glue yes? well FYI the led is held in place with what you choose